The effect of thinning on mechanical properties of Douglas fir, Norway spruce, and Sitka spruce
Thinning affects negatively the quality of sawn timber of Douglas fir, Norway spruce, and Sitka spruce. The effect was confirmed in structural-sized boards and small clear samples, and on standing trees using longitudinal velocity. The loss of quality across the three species due to thinning rarely exceeds 20% and is in most cases smaller than 5%.
The relationship between silvicultural management and the quality of timber produced is not entirely elucidated.
The effects of thinning on structural grade-determining properties of wood (elastic modulus, bending strength and density) were studied on Douglas fir (Pseudotsuga menziesii (Mirb.) Franco), Norway spruce (Picea abies (L.) H. Karst), and Sitka spruce (Picea sitchensis (Bong.) Carr)).
Acoustic velocity was measured in a total of 487 trees and their crown social status was recorded. Sixty trees were selected and cut into structural-sized boards (N = 1343). The amount of knots in each board was quantified using the grading machine GoldenEye702. All boards were destructively tested in four-point bending, after which a small clear specimen was cut from each board and again tested in bending (N = 1303). Specific stiffness and specific strength were used to estimate the size of the effect accounting for differing influence of thinning across the before-mentioned properties.
Thinning reduces all three properties with the likelihood and magnitude of the effect varying between species. The loss of quality due to thinning rarely exceeds 20% and is in most cases smaller than 5%. The effect of thinning and its size were also confirmed on the full sample of trees by using longitudinal velocity.
The results give a clearer idea of what the trade-offs are between timber quality and silvicultural management.
KeywordsThinning Wood quality Softwoods Bayesian analysis
The authors would like to thank Coillte and the Irish Forestry Unit Trust for enabling access to the forest stands and providing the testing material. The use of GoldenEye-702 machine was kindly provided by the Murray Timber Group while Martin Bacher from MiCROTEC helped with the scanning of the boards.
The first author was supported in undertaking this work by a Teagasc Walsh Fellowship. This work was also supported by grant aid from the Forest Sector Development Division of the Department of Agriculture, Food and the Marine, Ireland.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- Aslezaeim N (2016) Effect of cultural intensity and planting density on wood properties of loblolly pine (Pinus taeda L.). Ph.D., Mississippi State University, United States – MississippiGoogle Scholar
- Assmann E (1970) The principles of forest yield study: studies in the organic production, structure, increment, and yield of forest stands. Pergamon PressGoogle Scholar
- British Standards Institution (1957) Methods of testing small clear specimens of timber. British Standards Institution, London oCLC: 958830993Google Scholar
- Bues CT (1985) Der Einfluß von Bestockungsgrad und Durchforstung auf die Rohdichte von südafrikanischer Pinus radiata (The influence of stand density and thinning on the wood density of South African radiata pine) (In German). Holz Roh Werkst 43:69–73. https://doi.org/10.1007/BF02607108 CrossRefGoogle Scholar
- Cameron A, Gardiner B, Ramsay J, Drewett T (2015) Effect of early release from intense competition within high density natural regeneration on the properties of juvenile and mature wood of 40-year-old Sitka spruce (Picea sitchensis (Bong.) Carr.). Ann For Sci 72:99–107. https://doi.org/10.1007/s13595-014-0402-4 CrossRefGoogle Scholar
- Carpenter B, Gelman A, Hoffman MD, Lee D, Goodrich B, Betancourt M, Brubaker M, Guo J, Li P, Riddell A (2017) Stan: a probabilistic programming language. J Stat Softw 76. https://doi.org/10.18637/jss.v076.i01
- CEN (2002) EN 13183–1:2002 - Moisture content of a piece of sawn timber - Part 1: Determination of oven dry methodGoogle Scholar
- CEN (2010) EN 384:2016 - Structural timber - Determination of characteristic values of mechanical properties and densityGoogle Scholar
- CEN (2012) EN 408:2010+A1:2012 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical propertiesGoogle Scholar
- CEN (2016) EN 338:2016 - Structural timber - Strength classesGoogle Scholar
- Cown DJ (1973) Comparison of the effects of two thinning regimes on some wood properties of radiata pine. N Z J For Sci 4:12Google Scholar
- Cown DJ, McConchie DL (1982) Rotation age and silvicultural effects on wood properties of four stands of Pinus radiata. N Z J For Sci 12:71–85Google Scholar
- Eriksson D, Lindberg H, Bergsten U (2006) Influence of silvicultural regime on wood structure characteristics and mechanical properties of clear wood in Pinus sylvestris. Silva Fenn 40:743–762Google Scholar
- Evertsen JA, O’Brien D (1985) The effect of thinning and initial spacing on wood quality determining properties in Sitka spruce. In: Gallagher G (ed) The influence of spacing and selectivity in thinning on stand development, operations and economy, forest and wildlife service, Dublin, pp 130–139Google Scholar
- Gelman A, Carlin JB, Stern HS, Rubin DB (2004) Bayesian data analysis, 2nd edn. Chapman & Hall/CRC NoGoogle Scholar
- Hapla F (1985) Radiographisch-densitometrische Holzeigenschaftsuntersuchungen an Douglasien aus unterschiedlich durchforsteten Versuchsflächen (Investigations on properties of Douglas-fir in differently thinned experimental areas by X-ray densitometric method) (In German). Holz Roh Werkst 43:9–15. https://doi.org/10.1007/BF02609013 CrossRefGoogle Scholar
- Herman M, Dutilleul P, Avella-Shaw T (1998) Growth rate effects on temporal trajectories of ring width, wood density, and mean tracheid length in Norway spruce (Picea abies (l.) karst.). Wood Fiber Sci 30:6–17Google Scholar
- Kimberley MO, Cown DJ, McKinley RB, Moore JR, Dowling LJ (2015) Modelling variation in wood density within and among trees in stands of New Zealand-grown radiata pine. N Z J For Sci 45. https://doi.org/10.1186/s40490-015-0053-8
- Kimberley M, McKinley R, Cown D, Moore J (2017) Modelling the variation in wood density of New Zealand-grown Douglas-fir. N Z J For Sci 47. https://doi.org/10.1186/s40490-017-0096-0
- Kruschke J (2014) Doing Bayesian data analysis: a tutorial with R, JAGS, and Stan, 2nd edn. Academic PressGoogle Scholar
- Lasserre JP, Mason EG, Watt MS, Moore JR (2009) Influence of initial planting spacing and genotype on microfibril angle, wood density, fibre properties and modulus of elasticity in Pinus radiata D. Don corewood. For Ecol Manag 258:1924–1931. https://doi.org/10.1016/j.foreco.2009.07.028 CrossRefGoogle Scholar
- Lindström H (1996) Basic density of Norway spruce. Part II. Predicted by stem taper, mean growth ring width, and factors related to crown development. Wood Fiber Sci 28:240–251Google Scholar
- McElreath R (2016) Statistical rethinking: a Bayesian course with examples in R and Stan. Chapman & Hall/CRC Texts in Statistical Science, CRC PressGoogle Scholar
- Nocetti M, Bacher M, Brunetti M, Crivellaro A, Van de Kuilen JWG (2010) Machine grading of Italian structural timber: preliminary results on different wood species. World Conference on Timber Engineering, Riva del Garda, Italy, p 8Google Scholar
- R Core Team (2018) R: a language and environment for statistical computing, ViennaGoogle Scholar
- Schweingruber FH, Eckstein D, Serre-Bachet F, Bräker OU (1990) Identification, presentation and interpretation of event years and pointer years in dendrochronology. Dendrochronologia 8:9–38Google Scholar
- Simic K, Gendvilas V, O’Reilly C, Harte AM (2018) Predicting structural timber grade-determining properties using acoustic and density measurements on young Sitka spruce trees and logs. Holzforschung. https://doi.org/10.1515/hf-2018-0073
- Stan Development Team (2018) RStan: the R interface to Stan. R package version 2.17.3Google Scholar
- Watt MS, Moore JR, Façon JP, Downes GM, Clinton PW, Coker G, Davis MR, Simcock R, Parfitt RL, Dando J, Mason EG, Bown HE (2006) Modelling the influence of stand structural, edaphic and climatic influences on juvenile Pinus radiata dynamic modulus of elasticity. For Ecol Manag 229:136–144. https://doi.org/10.1016/j.foreco.2006.03.016 CrossRefGoogle Scholar
- Zeller L, Ammer C, Annighöfer P, Biber P, Marshall J, Schütze G, del Rio Gaztelurrutia M, Pretzsch H (2017) Tree ring wood density of Scots pine and European beech lower in mixed-species stands compared with monocultures. For Ecol Manag 400:363–374. https://doi.org/10.1016/j.foreco.2017.06.018 CrossRefGoogle Scholar
- Zhang H, Ma S, Wu Y (eds) (2011) Building materials in civil engineering. Woodhead Publishing in Materials, Woodhead Pub. ; Science Press, Oxford ; Philadelphia : Beijing oCLC: ocn666239692Google Scholar