An Investigation on Shear Behavior of Prestressed Concrete Beams Cast by Fiber Reinforced Concrete
- 21 Downloads
Failure due to shear is brittle in nature, and inherent lesser concrete tensile strength is a main contributing factor. During loading before the shear reinforcement could start functioning, cracking in concrete starts. Use of fibers in concrete had proven improved impact on tensile strength of concrete. Active reinforcement role initiates after concrete cracking starts. This paper investigates into the shear behavior of fiber reinforced, pretensioned concrete I-section beam specimens. A total of six beam specimens were cast. Two types of fibers, steel fibers and polypropylene fibers were used in five different proportions. For comparison, one control specimen was also cast without inclusions of fibers in concrete. Concrete mix ratio, prestress force, shear span-to-depth ratio and shear and flexural reinforcement details were kept constant in all specimens. Specimens were subjected to four-point loading to ensure that all specimens fail due to excessive shear force. During tests, deflections and strains were also measured. It was concluded that shear strength of beams was improved using steel fiber reinforced concrete (SFRC) as compared to polypropylene fiber reinforced concrete (PPFRC). SFRC beam containing 0.65% fiber depicted 50.71% improvement in ultimate failure load, 67% improvement in first cracking load and 36% improvement in ultimate deflection as compared to control beam.
KeywordsShear behavior Prestressed beams Steel fiber reinforced beam Polypropylene fiber reinforced beam Hybrid fiber reinforced beam
Unable to display preview. Download preview PDF.
- 1.Galligan, W.L.; Gerhards, C.C.; Ethington, R.L.: Evolution of Tensile Design Stresses for Lumber. No. FSGTR-FPL-28. Forest products lab Madison WI, (1979)Google Scholar
- 2.Hanson, J.M.; Hulsbos, C.L.: Overload behavior of prestressed concrete beams with web reinforcement, February 1963. (1963).Google Scholar
- 3.Halim, A.H.; Rasheed, H.A.; Esmaeily-Ghasemabadi, A.: Software for AASHTO LRFD combined shear and torsion computations using modified compression field theory and 3D Truss Analogy. No. K-TRAN: KSU-08-5. Kansas Department of Transportation (2011)Google Scholar
- 5.Adebar, P.; Mindess, S.; St.-Pierre, D.; Olund, B.: Shear tests of fiber concrete beams without stirrups. ACI Struct. J. 94(1), 68–76 (1997)Google Scholar
- 8.Kwak, Y.-K.; Eberhard, M.O.; Kim, W.-S.; Kim, J.: Shear strength of steel fiber-reinforced concrete beams without stirrups. ACI Struct. J. 99(4), 530–538 (2002)Google Scholar
- 9.Tan, K.-H.; Paramasivam, P.; Murugappan, K.: Steel fibers as shear reinforcement in partially prestressed beams. ACI Struct. J. 92(6), 643–652 (1995)Google Scholar
- 11.Patil, S.P.; Sangle, K.K.: Shear and flexural behaviour of prestressed and non-prestressed plain and SFRC concrete beams. J. King Saud Univ. Eng. Sci. 28, 321–328 (2016)Google Scholar
- 14.Patil, S.P. Miss.; Pawar, M.M.: Prediction of shear strength of steel fiber reinforced concrete beams without web reinforcement. Int. J. Eng. Res. Technol. 4(04) (2015)Google Scholar
- 15.Carnovale, D.; Vecchio, F.J.: Effect of fiber material and loading history on shear behavior of fiber-reinforced concrete. ACI Struct. J. 111(5), 1235 (2014)Google Scholar
- 16.Maruthachalam, D.; Karthick, M.P.: Shear performance of fiber reinforced concrete beams: a general review. Indian J. Eng. 2(3), 843–847 (2013)Google Scholar
- 20.Azizinamini, A.; Pavel, R.; Hatfield, E.; Gosh, S.K.: Behavior of lap-spliced reinforcing bars embedded in high-strength concrete. ACI Struct. J. 96(5), 826–836 (1999)Google Scholar