Advertisement

International Journal of Steel Structures

, Volume 19, Issue 2, pp 435–445 | Cite as

Axisymmetric Buckling of Cylindrical Shells with Nonuniform Thickness and Initial Imperfection

  • Farid Mahboubi NasrekaniEmail author
  • Hamidreza Eipakchi
Article
  • 20 Downloads

Abstract

In this article, the axial buckling load of an axisymmetric cylindrical shell with nonuniform thickness is determined analytically with the initial imperfection by using the first order shear deformation theory. The imperfection is considered as an axisymmetric continuous radial displacement. The strain–displacement relations are defined using the nonlinear von-Karman formulas. The constitutive equations obey Hooke’s law. The equilibrium equations are nonlinear ordinary differential equations with variable coefficients. The stability equations are determined from them. The stability equations are a system of coupled linear ordinary differential equations with variable coefficients. The results are compared with the finite element method and some other references.

Keywords

Buckling Nonuniform thickness Initial imperfection Finite element First order shear deformation theory Analytical method 

References

  1. Alashti, R. A., & Ahmadi, S. A. (2014). Buckling of imperfect thick cylindrical shells and curved panels with different boundary conditions under external pressure. Journal of Theoretical and Applied Mechanics, 52(1), 25–36.Google Scholar
  2. Amabili, M. (2008). Nonlinear vibrations and stability of shells and plates. New York: Cambridge University Press.CrossRefzbMATHGoogle Scholar
  3. Arbocz, J., & Babcock Charles, D., Jr. (1969). The effect of general imperfection on the buckling of cylindrical shells. Journal of Applied Mechanics-Transactions of ASME, 36, 28–38.CrossRefzbMATHGoogle Scholar
  4. Brush, D. O., & Almroth, B. O. (1975). Buckling of bars, plates and shells. New York: McGraw-Hill.CrossRefzbMATHGoogle Scholar
  5. Dung, D. V., & Hoa, L. K. (2012). Solving nonlinear stability problem of imperfect functionally graded circular cylindrical shells under axial compression by Galerkin’s method. Vietnam Journal of Mechanics, 34(3), 139–156.CrossRefGoogle Scholar
  6. Eglitis, E., Kalnins, K., & Ozolins, O. (2009). Experimental and numerical study on buckling of axially compressed composite cylinders. Scientific Journal of RTU, 10, 33–49.Google Scholar
  7. Gotsulyak, E. A., Luk’yanchenko, O. A., & Shakh, V. V. (2009). On stability of cylindrical shells of variable thickness with initial imperfections. International Applied Mechanics, 45(4), 433–436.CrossRefzbMATHGoogle Scholar
  8. Gristchak, V. Z., & Golovan, O. A. (2003). Hybrid asymptotic method for the effect of local thickness defects and initial imperfections on the buckling of cylindrical shells. Journal of Theoretical and Applied Mechanics, 41(3), 509–520.Google Scholar
  9. Hui, D., & Du, I. H. Y. (1987). Initial postbuckling behavior of imperfect, antisymmetric cross-ply cylindrical shells under torsion. Applied Mechanics, 54, 174–180.CrossRefzbMATHGoogle Scholar
  10. Kim, S. E., & Kim, C. S. (2002). Buckling strength of the cylindrical shell and tank subjected to axially compressive loads. Thin-Walled Structures, 40, 329–353.CrossRefGoogle Scholar
  11. Mahboubi Nasrekani, F., & Eipakchi, H. R. (2012). Elastic buckling of axisymmetric cylindrical shells under axial load using first order shear deformation theory. ZAMM-Journal of Applied Mathematics and Mechanics, 92(11–12), 937–944.MathSciNetCrossRefzbMATHGoogle Scholar
  12. Nayfeh, A. H. (1981). Introduction to perturbation techniques. New York: Wiley.zbMATHGoogle Scholar
  13. Papadopoulos, V., & Papadrakakis, M. (2005). The effect of material and thickness variability on the buckling load of shells with random initial imperfections. Computer Methods in Applied Mechanics and Engineering, 194, 1405–1426.CrossRefzbMATHGoogle Scholar
  14. Prabu, B., Raviprakash, A. V., & Rathinam, N. (2010). Parametric study on buckling behavior of thin stainless steel cylindrical shells for circular dent dimensional variations under uniform axial compression. International Journal of Engineering, Science and Technology, 2(40), 134–149.Google Scholar
  15. Shahrjerdi, A., & Bahramibabamiri, B. (2015). The effect of different geometrical imperfection of buckling of composite cylindrical shells subjected to axial loading. International Journal of Mechanical and Materials Engineering, 10(1), 6.CrossRefGoogle Scholar
  16. Shahzad, K., Ahmed, S., & Ullah, H. (2007). Effect of geometric imperfection on buckling strength of cylindrical shells. Failure of Engineering Materials and Structures, 48, 1034–1043.Google Scholar
  17. Sobey, A. J. (1964). The buckling of an axially loaded circular cylinder with initial imperfections (p. 64016). No: Royal Aeronautical Establishment Technical Report.Google Scholar

Copyright information

© Korean Society of Steel Construction 2018

Authors and Affiliations

  1. 1.Faculty of Mechanical and Mechatronics EngineeringShahrood University of TechnologyShahroodIslamic Republic of Iran

Personalised recommendations