Experimental Study and Confinement Analysis on RC Stub Columns Strengthened with Circular CFST Under Axial Load
- 76 Downloads
As the excellent mechanical performance and easy construction of concrete filled steel tubes (CFST) composite structure, it has the potential to be used to strengthen RC pier columns. Therefore, tests were conducted on 2 reinforcement concrete (RC) stub columns and 9 RC columns strengthened with circular CFST under axial loading. The test results show that the circular CFST strengthening method is effective since the mean bearing capacity of the RC columns is increased at least 3.69 times and the ductility index is significantly improved more than 30%. One of the reasons for enhancement is obvious confinement provided by steel tube besides the additional bearing capacity supplied by the strengthening materials. From the analysis of the enhancement ratio, the strengthening structure has at least an extra 20% amplification except for taking full advantage of the strength of the strengthening material. Through the analysis of confining stress provided by steel tube and the stress–strain relationship of confined concrete, it is found that the strength of the core concrete can be increased by 21–33% and the ultimate strain can be enhanced to beyond 15,000 με.
KeywordsRC columns Circular CFST Strengthening method Axial loading
The tests reported herein were made possible by the financial support from National Natural Science Foundation of China (Grant Nos. 51708240 and 51678456).
- Abedi, K., Afshin, H., & Shirazi, M. R. N. (2010). Numerical study on the seismic retrofitting of reinforced concrete columns using rectified steel jackets. Asian Journal of Civil Engineering, 11(2), 219–240.Google Scholar
- Aboutaha, R. S., Engelhardt, M. D., Jirsa, J. O., & Kreger, M. E. (1999a). Rehabilitation of shear critical concrete columns by use of rectangular steel jackets. ACI Structural Journal, 96(1), 68–78.Google Scholar
- Aboutaha, R. S., Engelhardt, M. D., Jirsa, J. O., & Kreger, M. E. (1999b). Experimental investigation of seismic repair of lap splice failures in damaged concrete columns. ACI Structural Journal, 96(2), 297–306.Google Scholar
- Julio, E. N. B. S., & Branco, F. A. B. (2008). Reinforced concrete jacketing-interface influence on cyclic loading response. ACI Structural Journal, 105(4), 471–477.Google Scholar
- Li, C. Q., & Melchers, R. E. (2005). Time-dependent risk assessment of structural deterioration caused by reinforcement corrosion. ACI Structural Journal, 102(5), 754–762.Google Scholar
- Miller E. A. (2006). Experimental research of reinforced concrete column strengthening methods. Master Thesis, The Ohio State University. pp. 24–30, 222–230.Google Scholar
- Priestley, M. J. N., Seible, F., Xiao, Y., & Verma, R. (1994a). Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength-part 1: Theoretical considerations and test design. ACI Structural Journal, 91(4), 394–405.Google Scholar
- Priestley, M. J. N., Seible, F., Xiao, Y., & Verma, R. (1994b). Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength-part 2: Test results and comparison with Theory. ACI Structural Journal, 91(5), 537–551.Google Scholar