Advertisement

Journal of Remanufacturing

, Volume 9, Issue 1, pp 51–60 | Cite as

Economic analysis of remanufacturing of engine valves - a case study

  • Harpreet SinghEmail author
  • Pramod Kumar Jain
Research
  • 42 Downloads

Abstract

With the fast development and frequent changes of the engineering products, natural resources are arbitrary exploited and the environment is used without repayment, which causes many problems of great magnitude such as zoology damaged all over the globe, resource waste and depletion, environmental pollution and so on. Therefore, remanufacturing engineering is the necessity of the current scenario to solve the ambivalence of economic development and resource shortcoming. This article provides an insight on the economic analysis of remanufacturing engineering using a comparative analysis of upgraded part with the new part. Interestingly, hybrid electrochemical abrasive finishing (ECAF) have a unique capability to finish the 3d part in a single setup which majorly help to minimize the operation time. It is found that the remanufactured part cost only 42.12% of new part with 94% savings of material. No significant changes in realistic surface micro-structure and micro-hardness have been observed after ECAF process. SEM micrograph depicts the no presence of micro-cracks, craters, voids, scars and peeling on the rebuild surface. It means that the remanufactured part is able to perform like a new performer.

Keywords

Remanufacturing Material deposition ECAF Surface quality Geometrical accuracy Material saving 

Notes

Compliance with ethical standards

Conflicting interests

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

References

  1. 1.
    Fernand J (ed) (2008) Weiland Remanufacturing Automotive Mechatronics & Electronics, APRAGoogle Scholar
  2. 2.
    Gallo M, Romano E, Santillo LC (2012) A perspective on remanufacturing business: issues and opportunities, International Trade from Economic and Policy Perspective  https://doi.org/10.5772/2726
  3. 3.
    Jain VK (2016) Nanofinishing science and technology: basic and advanced finishing and polishing processes, CRC Press, Taylor & Francis GroupGoogle Scholar
  4. 4.
    Parker D (2015) Remanufacturing Market Study For Horizon 2020, grant agreement No 645984Google Scholar
  5. 5.
    Seliger G, Basdere B, Ciupek M, Franke C (2003) Contribution to efficient cellular phone remanufacturing. In: CIRP Seminar on Life Cycle Engineering, Copenhagen. Denmark, May 2003Google Scholar
  6. 6.
    Seliger G (2007) Sustainability in manufacturing: recovery of resources in product and material cycles. Springer, BerlinCrossRefGoogle Scholar
  7. 7.
    Singh H, Jain PK (2015) A comparative study of precision finishing of rebuild engine valve faces using micro-grinding and ECH process. J Remanufact 2015:5(6).  https://doi.org/10.1186/s13243-015-0016-5 Google Scholar
  8. 8.
    Singh H, Jain PK (2015) Finishing characteristics of plasma and HVOF cladding. Proceeding for International Conference on Advances in Materials, Manufacturing and Applications (AmmA - 2015), NIT Trichy, April 9-11, 2015, pp. 48Google Scholar
  9. 9.
    Singh H, Jain PK (2016) Influence of ultrasonic vibrations on process performance of electrochemical honing. J Adv Manuf Technol 87(1):1057–1066CrossRefGoogle Scholar
  10. 10.
    Skerlos SJ, Zettl M, Basdere B, Seliger G (2004) Collaborative development of sustainable strategies for the reuse of mobile phones in a global educational environment. In: Proceedings Global Conference on Sustainable Product Development and Life Cycle Engineering, Berlin, Germany, S. 337–344Google Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringIndian Institute of Information Technology, Design and Manufacturing JabalpurJabalpurIndia
  2. 2.Department of Mechanical and Industrial EngineeringIndian Institute of Technology RoorkeeRoorkeeIndia

Personalised recommendations