Advertisement

Experimental Investigation of Dissimilar Metal Weld of SA335 P11 and SA312 TP304 Formed by Gas Tungsten Arc Welding (GTAW)

  • Rakesh ChaudhariEmail author
  • Asha Ingle
Technical Paper
  • 7 Downloads

Abstract

Dissimilar metal welds are widely used in process industries for applications such as pressure vessels, reactors, reheaters and heat exchangers. This helps in getting tailor-made properties in components required some heterogeneous working conditions. Joining of dissimilar metals has drawn great interest due to the challenges posed by variation in material composition and characteristics of joining metals. The present study empirically investigates the gas tungsten arc welding (GTAW) parameters to probe their effect on the mechanical and metallurgical behaviour of welded joints of SA335 P11 and SA312 TP304 alloys. Tensile test, hardness measurement and microstructure investigations were performed to check weld strength. The welded joint showed higher strengths than base metals due to carbide formation in weld zone. The strength of joint remains unchanged after heat treatment, whereas increase in hardness was observed due to grain boundary carbide precipitation. The present investigation determines that GTAW technique would be successfully used to join these particular dissimilar alloys.

Keywords

GTAW Hardness Microstructures Tensile Welding 

Notes

References

  1. 1.
    Bhattacharya A, and Kumar A, Mater Manu Pro J 31 (2016) 300.CrossRefGoogle Scholar
  2. 2.
    Chaudhari R, Ingle A, and Kalita K, Mater Focus 5 (2016) 1.Google Scholar
  3. 3.
    Liu K, Li Y, and Wang J, Mater Manu Pro j31 (2016) 2165.Google Scholar
  4. 4.
    Chaudhari R, Ingle A, and Kalita K, Trans Ind Inst Met 70 (2017) 1.Google Scholar
  5. 5.
    Jayakumar N, Mohanamurugan S, Rajavel R, and Kumar J A, Ind J Sci Technology 8 (2015) 3.Google Scholar
  6. 6.
    Kudiyarasan S, and Vendan S A, Ind J Sci Technol 8 (2015) 50.Google Scholar
  7. 7.
    Lee H T, and Jeng S L, Sci Technol Weld Join 6 (2001) 225.Google Scholar
  8. 8.
    Jamshidi A H, Farzadi A, Serajzadeh S A, and Kokabi H, Int J Adv Manuf Technol 8 (2008) 1663Google Scholar
  9. 9.
    Babak B, and Behnam D, Ind J Sci Technol 9 (2016) 161Google Scholar
  10. 10.
    Chaudhari R, Ingle A, and Parekh R, Reliability of dissimilar metal joints using fusion welding: a review, in International Conference on Machine Learning, Electrical and Mechanical Engineering, Dubai (UAE) (2014), pp 1–7Google Scholar
  11. 11.
    Cenate C T, Rani B S, Sangeetha D N, and Venkatraman B, Ind J Sci Technol 12 (2015) 1Google Scholar
  12. 12.
    Lu S, Fujii H, and Nogia K, J. Mater Process Technol (2009) 1231Google Scholar
  13. 13.
    Tathgir S, Bhattacharya A, and Bera T, Mater Manuf Process (2014) 1Google Scholar
  14. 14.
    Tseng K-H, and Hsu C-Y, J Mater Process Technol 211 (2011) 503Google Scholar
  15. 15.
    Fujii H, Sato T, Lu S, and Nogi K, Mater Sci Eng 495 (2008) 296Google Scholar
  16. 16.
    Yachi B R T, Miyashita Y, Mutoh Y, Mater Sci Eng 467 (2007) 108Google Scholar
  17. 17.
    Muruganandam D, Balasubramaniyan C, and Gokulachander B, Ind J Sci Technol 8 (2015) 1Google Scholar
  18. 18.
    Lee K J, and Kumai S, Mater Trans 47 (2006) 1178Google Scholar
  19. 19.
    Ramkumar K D, Arivazhagan N, and Narayanan S, Mater Des 40 (2012) 70Google Scholar
  20. 20.
    Ramkumar K D, Patel S D, Praveen S S, Choudhury D J, Prabaharan P, Arivazhagan N, and Xavior M A, Mater Des 62 (2014) 175Google Scholar
  21. 21.
    Lippold J C, Kiser S D, and DuPont J N, Welding Metallurgy and Weldability of Nickel-Base Alloys. John Wiley & Sons, New York (2011), p 75.Google Scholar
  22. 22.
    Shankar V, Gill T P S, Mannan S L, and Sundaresan S, Sadhana 28 (2003) 359Google Scholar
  23. 23.
    Kell J, Tyrer J R, Higginson R L, and Thomson R C, J Microscopy 52 (2005) 167Google Scholar

Copyright information

© The Indian Institute of Metals - IIM 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringMPSTME, SVKM’s Narsee Monjee Institute of Management Studies (NMIMS)ShirpurIndia
  2. 2.Department of Mechanical EngineeringMPSTME, SVKM’s Narsee Monjee Institute of Management Studies (NMIMS)MumbaiIndia

Personalised recommendations