Advertisement

Transactions of the Indian Institute of Metals

, Volume 72, Issue 2, pp 327–333 | Cite as

Effect of Calcium Hexaborate Pentahydrate as a Lubricant Additive in Commercial Engine Oil

  • A. Özcan
  • D. YılmazEmail author
  • N. Koç
  • H. Gaşan
Technical Paper
  • 21 Downloads

Abstract

Boron-based compounds can be widely used in tribological applications such as lubricants, anti-wear additives and in addition to this, these compounds, especially borates, are environment friendly, easily available and cheap materials. In particular, nanoparticles are used as additives or lubricants to prevent friction and wear on steels. Nano-sized lubricants with novel unique properties such as wear resistance, low friction coefficient and high load capacity can be used as tribological materials. In this study, different amounts of platelet ladder-like calcium hexaborate pentahydrate (CaB6O10·5H2O) nanoparticles were used as a lubricant additive to characterize the effect of CaB6O10·5H2O on tribological properties of AISI 52100 steel. Synthesized calcium hexaborate pentahydrate nanoparticles were dispersed with different concentrations (0.1%, 0.5% and 1.0% wt.) in commercial engine oil, and tribological tests were conducted using ball-on-disk geometry. The morphology of surface was studied using scanning electron microscopy (SEM). Coefficient of friction was decreased by about 26.6% with the contribution of 1.0% wt. of CaB6O10·5H2O into the commercial engine oil (SAE10W40).

Keywords

Tribology Lubricant Steel Calcium hexaborate pentahydrate 

References

  1. 1.
    Shah F U, Glavatskih S, and Antzutkin O N, Tribol Lett 51 (2013) 281.CrossRefGoogle Scholar
  2. 2.
    Hernandez Battez A, Fernandez Rico J E, Navas Arias A, Viesca Rodriguez J L, Chou Rodriguez R, and Diaz Fernandez J M, Wear 261 (2006) 256.CrossRefGoogle Scholar
  3. 3.
    Zhang M, Wang X, Fu X, and Xia Y, Tribol Int 42 (2009) 1029.CrossRefGoogle Scholar
  4. 4.
    Normand V, Martin J M, Ponsonnet L, and Inoue K, Tribol Lett 5 (1998) 235.CrossRefGoogle Scholar
  5. 5.
    Zhao G, Zhao Q, Li W, Wang X, and Liu W, Lubr Sci 26 (2014) 43.CrossRefGoogle Scholar
  6. 6.
    Erdemir A, in Nanolubricants, (eds) Neale M J, Priest M, Stachowiak G, Martin J M, and Ohmae N (2008).  https://doi.org/10.1002/9780470987711.ch6.
  7. 7.
    Hu Z S, and Dong J X, Wear 216 (1998) 87.CrossRefGoogle Scholar
  8. 8.
    Hu Z S, Dong J X, Chen G X, and He J Z, Wear 243 (2000) 43.CrossRefGoogle Scholar
  9. 9.
    Kimura Y, Wakabayashi T, Okada K, Wada T, and Nishikawa H, Wear 232 (1999) 199.CrossRefGoogle Scholar
  10. 10.
    Abdullah M I H C, Abdollah M F Bin, Amiruddin H, Tamaldin N, and Nuri N R M, Procedia Eng 68 (2013) 313.Google Scholar
  11. 11.
    Yilmaz D, Koç N, and Turan S, J Aust Ceram Soc 54 (2018) 377.CrossRefGoogle Scholar
  12. 12.
    Hwang Y, Lee C, Choi Y, Cheong S, Kim D, Lee K, Lee J, and Kim SH, J Mech Sci Technol 25 (2011) 2853.CrossRefGoogle Scholar
  13. 13.
    Li J S, Hao L F, Xu X H, Zhang L, and Ren T H, Adv Mater Res 148149 (2010) 1047.CrossRefGoogle Scholar
  14. 14.
    Xu X H, Xue Q J, Li J S, and Hao L F, Mech Aerosp Eng Pts 1-7 110116 (2012) 1003.Google Scholar
  15. 15.
    Cao C E, Wang Y J, Zheng N Z, Xiong C H, and Shen H R, Key Eng Mater 280283 (2005) 605.Google Scholar
  16. 16.
    Li Y Q, Adv Mater Res 549 (2012) 82.CrossRefGoogle Scholar
  17. 17.
    Erfani M, Saion E, Soltani N, Hashim M, Wan Abdullah W S B, and Navasery M, Int J Mol Sci 13 (2012) 14434.CrossRefGoogle Scholar
  18. 18.
    Liu J, Ma X Y, and Liu Z H, Powder Technol 246 (2013) 26.CrossRefGoogle Scholar
  19. 19.
    Liu Z H, and Xue L, Mater Lett 62 (2008) 2692.CrossRefGoogle Scholar
  20. 20.
    Yilmaz D, Savaci U, Koç N, and Turan S, Ceram Int 44 (2018) 2976.CrossRefGoogle Scholar
  21. 21.
    Archard J F, J Appl Phys 24 (1953) 981.Google Scholar
  22. 22.
    ICDD. 00-012-0528 (2013).Google Scholar
  23. 23.
    Winer W O, Wear 10 (1967) 422.CrossRefGoogle Scholar
  24. 24.
    Zhao G, Zhao Q, Li W, Wang X, and Liu W, Lubr Sci, 26 (2014) 43.CrossRefGoogle Scholar
  25. 25.
    Hu Z S, and Dong J X, Wear, 216 (1997) 87.CrossRefGoogle Scholar
  26. 26.
    Hu Z S, Dong J X, Chen G X, and He J Z, Wear, 243 (2000) 43.CrossRefGoogle Scholar
  27. 27.
    Hu Z S, Lai R, Lou F, Wang L G, Chen Z L, Chen G X, and Dong J X, Wear, 253 (2002) 370.CrossRefGoogle Scholar
  28. 28.
    Zhang X, Xu H, Wang J, Ye X, Lei W, Xue M, Tang H, and Li C, Nanoscale Res Lett 11 (2016) 442.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2018

Authors and Affiliations

  1. 1.Metallurgical and Materials EngineeringEskisehir Osmangazi UniversityEskisehirTurkey

Personalised recommendations