Advertisement

Transactions of the Indian Institute of Metals

, Volume 71, Issue 11, pp 2713–2716 | Cite as

Microstructural Characterisation of Ti Containing Fe-7Al-0.35C Based Low-Density Steel

  • Shivkumar Khaple
  • V. V. Satya Prasad
  • Brahma Raju Golla
Technical Paper

Abstract

In this paper, the role of Ti on the in-situ formation of carbides and its effect on the microstructure of Fe-7Al-0.35C alloy have been investigated. Initially, Thermo-Calc software was used to predict the phases present in the alloys which were validated by experimental work. Vacuum arc remelting process was used to make an alloy pancake of 10-mm thickness, which was hot-rolled to 2-mm thickness. The alloys were characterised by X-ray diffraction, optical, scanning electron microscope and electron probe micro-analysis. The results show that all the alloys exhibit two types of TiC precipitates, which are dark cuboidal as primary and dark acicular type as secondary precipitates along with grey-coloured needle-shaped κ-carbide precipitate in α(Fe–Al) matrix. The carbon present in the alloy is partitioned between TiC and κ-carbide precipitates. Addition of Ti has also resulted in grain refinement of all the alloys.

Keywords

Low-density steel Fe-7Al-0.35C alloy TiC Thermo-Calc 

Notes

Acknowledgements

The authors are grateful to Director DMRL, for his keen interest and permission to publish this work.

References

  1. 1.
    Frommeyer G, Drewes E J, Engl B, La Revue de Métallurgie-CIT 10 (2000)1245.CrossRefGoogle Scholar
  2. 2.
    Rana R, JOM 66 (2014) 1730.CrossRefGoogle Scholar
  3. 3.
    Rana R, Liu C, Ray R K, Scr Mater 68 (2013) 354.CrossRefGoogle Scholar
  4. 4.
    Han S Y, Shin S Y, et al, Metall Mater Trans A 42(2011)138.CrossRefGoogle Scholar
  5. 5.
    Satya Prasad V V, Khaple Shivkumar, Baligidad R G, JOM 66 (2014)1785.CrossRefGoogle Scholar
  6. 6.
    Khaple Shivkumar, Satya Prasad V V, Golla Brahma Raju, Baligidad R G, Gokhale A A, Mater Sci Eng A 697 (2017)167.CrossRefGoogle Scholar
  7. 7.
    Khaple Shivkumar, Satya Prasad V V, unpublished data.Google Scholar
  8. 8.
    Ko S H, Hanada S, Intermetallics 7 (1999)947.CrossRefGoogle Scholar
  9. 9.
    Parashivamurthy K I, Sampatha Kumaran P, Seetharamu S, Cryst Res Technol, 43, (2008)674.CrossRefGoogle Scholar
  10. 10.
    Kant R, Selokar A, Agarwal V, Prakash U, Adv Mater Res 1043 (2014)17.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2018

Authors and Affiliations

  1. 1.Defence Metallurgical Research LaboratoryHyderabadIndia
  2. 2.National Institute of TechnologyWarangalIndia

Personalised recommendations