Advertisement

Transactions of the Indian Institute of Metals

, Volume 71, Issue 10, pp 2505–2515 | Cite as

Behaviour of Hydrogen in Industrial Scale Steel Melts

  • D. Ravichandar
  • T. Balusamy
  • R. Gobinath
  • G. Balachandran
Technical Paper
  • 45 Downloads

Abstract

The behaviour of hydrogen during controlled industrial scale secondary steel making process has been examined in a variety of low alloy steels, sensitive to hydrogen flaking. The study examines the role played by the moisture in input raw materials such as the ferro-alloys, type of carbon additive and fluxes in enhancing the hydrogen content in the ladle furnace. Post alloying, the influence of vacuum degassing parameters such as the vacuum level, vacuum holding time, Ar flow rate, type of porous plug used, slag chemistry and the steel grade was examined. The vacuum degassing process was analysed using a kinetic model, which could justify the trends seen in the vacuum level, holding time and Ar gas flow rate. Finally, the hydrogen pick-up post vacuum degassing through slag cover and the casting tundish was found to be influenced by parameters such as the quality of the tundish spray mass, and casting sequence. The influence of steel grade in hydrogen removal was also examined.

Keywords

Hydrogen pick up in steel making Hydrogen removal in steel making Vacuum degassing Tundish hydrogen pick-up 

Notes

Acknowledgements

The authors thank Mr. G. Murali and team from Steel Melting Shop for conducting the various trials as per requirement. The authors thank Mr. S. M. Kumar and team from Quality Assurance Department for conducting the various analysis. The support accorded by senior management to conduct this research is gratefully acknowledged.

References

  1. 1.
    Ravichandar D, Balusamy T, and Nagashanmugam K B, Appl Mech Mater 591 (2014) 38.CrossRefGoogle Scholar
  2. 2.
    Ravichandar D, Balusamy T, and Nagashanmugam K B, Indian J Eng Mater Sci 22 (2016), 283.Google Scholar
  3. 3.
    Ravichandar D, Balusamy T, and Nagashanmugam K B, J Chem Technol Metall 51 (2016), 328.Google Scholar
  4. 4.
    Abijit N, IIM Metal News 12 (2009) 17.Google Scholar
  5. 5.
    Turkdogan E T, and Fruehan R J, Fundamentals of Steelmaking, Maney Publishing, Leeds (1996) p 96257.Google Scholar
  6. 6.
    Fruehan R J, Vacuum Degassing of Steel, Iron and Steel Society/AIME, Warrendale (1990) p 212.Google Scholar
  7. 7.
    Bradshaw A V, and Richardson F D, Thermodynamic and Kinetic Aspects of Vacuum Degassing. Special Report, 92 (1965).Google Scholar
  8. 8.
    Fruehan R J, and Misra S, EERE Publication and Product Library (2005).Google Scholar
  9. 9.
    Lange K W, Int Mater Rev 33 (1988), 53.CrossRefGoogle Scholar
  10. 10.
    Bannenberg N, Bergmann B, and Gaye H, Steel Res Int 63 (1992), 431.CrossRefGoogle Scholar
  11. 11.
    Yu S, and Louhenkilpi S, Metall Mater Trans B 44 (2013), 459.CrossRefGoogle Scholar
  12. 12.
    Yu S, Miettinen J, and Louhenkilpi S, Int Mater Sci Forum 762 (2013), 253.CrossRefGoogle Scholar
  13. 13.
    Steneholm K, Andersson M, Tilliander A, and Jonsson P G, Ironmak Steelmak 40 (2013), 199.CrossRefGoogle Scholar
  14. 14.
    Baragiola S, Unamuno I, Sormann A, Pena Quintero B, Lovicu G F, Niska J, Kajberg J, and Kytonen H, European Commission, Research Fund for Coal and Steel, EUR 26397 EN (2012).Google Scholar
  15. 15.
    Gobinath R, M. Tech Thesis, Indian Institute of Technology Bombay (2015). http://etd.library.iitb.ac.in//data/13/meta/mtech/133114007/abstract.html.
  16. 16.
    Fera S, Osta A, Idoyaga Z, Albarran J, Molinero J, Valleggi R, and Sormann A, Technical Steel Research, EU, EUR 22435 EN, Contract No. 7210-PR/357 (2005) p 51.Google Scholar
  17. 17.
    Sigworth G K, and Elliott J F, Met Sci 8 (1974) 298.CrossRefGoogle Scholar
  18. 18.
    Wang H, Viswanathan N N, and Ballal N B and Seetharaman S, Int J Chem React Eng 8 (2010) 1.Google Scholar

Copyright information

© The Indian Institute of Metals - IIM 2018

Authors and Affiliations

  • D. Ravichandar
    • 1
  • T. Balusamy
    • 2
  • R. Gobinath
    • 1
  • G. Balachandran
    • 1
  1. 1.JSW Steel Limited, Salem WorksMecheri, SalemIndia
  2. 2.Department of Mechanical EngineeringGovernment College of EngineeringSalemIndia

Personalised recommendations