Mechanical and crack evolution characteristics of coal–rock under different fracture-hole conditions: a numerical study based on particle flow code

Original Article
  • 70 Downloads

Abstract

Coal–rock material contains many fractures and holes and it is of great significance to study their mechanical characteristics for understanding the instability mechanism of coal body. In this manuscript, considering fracture with different inclinations and hole with different positions, a variety of defective coal–rock specimens were established by PFC2D software, then characteristics of stress–strain and crack evolution law of coal–rock with different fracture-holes were discussed. The results show that mechanical properties, crack evolution characteristics, propagation forms of initial crack and final crack distribution form of coal–rock specimens with different fracture holes are different; the fracture angle has a larger influence than the hole position. Peak strength, peak strain, peak step and the total crack number show an increasing trend with the increase of fracture angle, while the crack initial propagation length becomes shorter and shorter.

Keywords

Coalrock Fracture hole Mechanics Crack evolution 

Notes

Acknowledgements

The authors would like to acknowledge the support of the Natural Science Foundation of Jiangsu Province (No. BK20170670), the Fundamental Research Funds for the Central Universities (No. 3205007810), and the National Natural Science Foundation of China (No. 51304126, 51704179).

References

  1. Afolagboye LO, He J, Wang S (2017) Experimental study on cracking behaviour of moulded gypsum containing two non-parallel overlapping flaws under uniaxial compression. Acta Mech Sin 33(2):394–405.  https://doi.org/10.1007/s10409-016-0624-9 CrossRefGoogle Scholar
  2. Bahaaddini M, Sharrock G, Hebblewhite BK (2013) Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression. Comput Geotech 49:206–225.  https://doi.org/10.1016/j.compgeo.2012.10.012 CrossRefGoogle Scholar
  3. Castro-Filgueira U, Alejano LR, Arzúa J et al (2017) Sensitivity analysis of the micro-parameters used in a PFC analysis towards the mechanical properties of rocks. Proc Eng 191:488–495.  https://doi.org/10.1016/j.proeng.2017.05.208 CrossRefGoogle Scholar
  4. Cho N, Martin CD, Sego DC (2007) A clumped particle model for rock. Int J Rock Mech Min Sci 44(7):997–1010.  https://doi.org/10.1016/j.ijrmms.2007.02.002 CrossRefGoogle Scholar
  5. Cundall PA, Strack OD (1979) A discrete numerical model for granular assemblies. Geotechnique 29(1):47–65.  https://doi.org/10.1680/geot.1979.29.1.47 CrossRefGoogle Scholar
  6. He MC, Xie HP, Peng SP et al (2005) Study on rock mechanics in deep mining engineering. Chin J Rock Mech Eng 24(16):2803–2813 (in Chinese) Google Scholar
  7. Itasca Consulting Group Inc. (2014) PFC (particle flow code), version 5.0. ICG, MinneapolisGoogle Scholar
  8. Justo JL, Justo E, Azañón JM et al (2010) The use of rock mass classification systems to estimate the modulus and strength of jointed rock. Rock Mech Rock Eng 43(3):287–304.  https://doi.org/10.1007/s00603-009-0040-6 CrossRefGoogle Scholar
  9. Li D, Cheng T, Zhou T et al (2015) Experimental study of the dynamic strength and fracturing characteristics of marble specimens with a single hole under impact loading. Chin J Rock Mech Eng 34(2):249–260 (in Chinese) Google Scholar
  10. Mohamed KM, Murphy MM, Lawson HE et al (2016) Analysis of the current rib support practices and techniques in U.S. coal mines. Int J Min Sci Technol 26(1):77–87.  https://doi.org/10.1016/j.ijmst.2015.11.014 CrossRefGoogle Scholar
  11. Ning JG, Wang J, Jiang JQ et al (2018) Estimation of crack initiation and propagation thresholds of confined brittle coal specimens based on energy dissipation theory. Rock Mech Rock Eng 51(1):119–134.  https://doi.org/10.1007/s00603-017-1317-9 CrossRefGoogle Scholar
  12. Steen BVD, Vervoort A, Napier JAL (2005) Observed and simulated fracture pattern in diametrically loaded discs of rock material. Int J Fract 131(1):35–52.  https://doi.org/10.1007/s10704-004-3177-z CrossRefGoogle Scholar
  13. Wang X, Wen ZJ, Jiang YJ (2016) Time-space effect of stress field and damage evolution law of compressed coal-rock. Geotech Geol Eng 34(6):1933–1940.  https://doi.org/10.1007/s10706-016-0074-y CrossRefGoogle Scholar
  14. Wang X, Wen ZJ, Jiang YJ et al (2018) Experimental study on mechanical and acoustic emission characteristics of rock-like material under non-uniformly distributed loads. Rock Mech Rock Eng 51(3):729–745.  https://doi.org/10.1007/s00603-017-1363-3 CrossRefGoogle Scholar
  15. Yang SQ, Huang YH (2014) Experimental and particle flow simulation on crack coalescence behavior of sandstone specimens containing double holes and a single fissure. J Basic Sci Eng 22(3):584–596 (in Chinese) Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of Civil EngineeringSoutheast UniversityNanjingChina
  2. 2.Institute of Future Underground SpaceSoutheast UniversityNanjingChina

Personalised recommendations