Environmental Earth Sciences

, Volume 69, Issue 4, pp 1333–1346 | Cite as

The influence of the characteristics of quartz and mineral deterioration on the strength of granitic dimensional stones

Special Issue
First Online:
Received:
Accepted:

Abstract

It is important to have a thorough knowledge of the petrographic characteristics of rocks to evaluate and understand their mechanical behavior. This paper deals with the influence of the texture and the mineral characteristics of nine Portuguese granites employed as dimensional stones. This study evaluates different mineral characteristics, such as mineral deterioration, grain size, quartz fissuration and the contacts between quartz and others mineral groups. The main differences in the studied granites were identified, clarifying the relationship between the petrographic characteristics. The consequences on their respective mechanical behavior were subsequently evaluated. The physical and textural characteristics of quartz in the studied granites have proven to be very important for understanding the behavior of granitic rocks under compressive stress. Uniaxial compressive strength values are not proportional to the quartz–feldspar ratio or quartz content and there is a tendency for strength to decrease with the increase in quartz. This could be related to the increase in quartz-quartz contacts and the decrease in the rock capacity for accommodating the deformation.

Keywords

Granite Petrophysics Mineral deterioration Quartz fissuration Uniaxial compressive strength 
This is a preview of subscription content, log in to check access.

Notes

Acknowledgments

This study was supported by Centro de Geociências da Universidade de Coimbra, with funds from the FCT-Fundação para a Ciência e a Tecnologia. The author is grateful to the anonymous reviewers for their suggestions and constructive comments.

References

  1. Aires-Barros L (1991) Alteração e alterabilidade de rochas. Instituto Nacional de Investigação Científica, LisboaGoogle Scholar
  2. Akesson UA, Stigh J, Lindqvist JE, Goransson M (2003) The influence of foliation on the fragility of granitic rocks, image analysis and quantitative microscopy. Eng Geol 68:275–288CrossRefGoogle Scholar
  3. Akesson U, Hansson J, Stigh J (2004) Characterisation of microcracks in the Bohus granite, western Sweden, caused by uniaxial cyclic loading. Eng Geol 72(1–2):131–142CrossRefGoogle Scholar
  4. Aydin A, Basu A (2005) The Schmidt hammer in rock material characterization. Eng Geol 81:1–14CrossRefGoogle Scholar
  5. Basu A, Ghosh N, Das M (2012) Categorizing weathering grades of quartzitic materials and assessing Brazilian tensile strength with reference to assigned grades. Int J Rock Mech Min Sci 49:148–155CrossRefGoogle Scholar
  6. Bell FG (1978a) Physical and engineering properties of the Fell Sandstone, Northhumberland, England. Eng Geol 12:1–29CrossRefGoogle Scholar
  7. Bell FG (1978b) Petrographical factors relating to porosity and permeability in the Fell Sandstone. Q J Eng Geol 11(2):13–126CrossRefGoogle Scholar
  8. Ceryan S, Tudes S, Ceryan N (2008a) A new quantitative weathering classification for igneous rocks. Environ Geol 67(1):97–104Google Scholar
  9. Ceryan S, Tudes S, Ceryan N (2008b) Influence of weathering on the engineering properties of Harsit granitic rocks (NE Turkey). Bull Eng Geol Env 67(1):97–104CrossRefGoogle Scholar
  10. Chaki S, Takarli M, Agbodjan WP (2008) Influence of thermal damage on physical properties of a granite rock: porosity, permeability and ultrasonic wave evolutions. Constr Build Mater 22(7):1456–1461CrossRefGoogle Scholar
  11. Chen Y, Nishiyama T, Kusuda H, Kita H, Sato T (1999) Correlation between microcrack distribution patterns and granitic rock splitting planes. Int J Rock Mech Min Sci 36:535–541CrossRefGoogle Scholar
  12. Davis JC (1986) Statistics and data analysis in geology. Wiley, New YorkGoogle Scholar
  13. Eberhardt E, Stimpson B, Stead D (1999a) The influence of mineralogy on the initiation of microfractures in granite. In: Vouille G, Berest (eds) Proceedings of 9th International Congress on Rock Mechanics. A.A. Balkema, Rotterdam, pp 1007–1010Google Scholar
  14. Eberhardt E, Stimpson B, Stead D (1999b) Effects of grain size on the initiation and propagation of thresholds of stress induced brittle fractures. Rock Mech Rock Eng 32:81–99CrossRefGoogle Scholar
  15. Fahimifar A, Soroush H (2007) A moisture index classification system for rocks (MiC System). Rock Mech Rock Eng 40(1):63–79CrossRefGoogle Scholar
  16. Fahy MP, Guccione MJ (1979) Estimating strength of sandstone using petrographic thin-section data. Bull Assoc Eng Geol 16:467–485Google Scholar
  17. Fishman YA (2008) Features of compressive failure of brittle materials. Int J Rock Mech Min Sci 45(6):993–998CrossRefGoogle Scholar
  18. Fort R, Fernandez-Revuelta B, Varas MJ, de Buergo MA, Taborda-Duarte M (2008) Influence of anisotropy on the durability of Madrid-region Cretaceous dolostone exposed to salt crystallization processes. Mater Constr 58(289–90):161–178CrossRefGoogle Scholar
  19. Ghobadi MH, Momeni AA (2011) Assessment of granitic rocks degradability susceptive to acid solutions in urban area. Environ Earth Sci 64:753–760CrossRefGoogle Scholar
  20. Gupta AS, Rao KS (2000) Weathering effects on the strength and deformational behaviour of crystalline rocks under uniaxial compression state. Eng Geol 56:257–274CrossRefGoogle Scholar
  21. Gupta AS, Rao KS (2001) Weathering indices and their applicability for crystalline rocks. Bull Eng Geol Environ 60:201–221CrossRefGoogle Scholar
  22. Gurocak Z, Kilic R (2005) Effect of weathering on the geomechanical properties of the Miocene basalts in Malatya, Eastern Turkey. Bull Eng Geol Environ 64:373–381CrossRefGoogle Scholar
  23. Hajiabdolmajid V, Kaiser P (2003) Brittleness of rock and stability assessment in hard rock tunneling. Tunn Undergr Space Tech 18:35–48CrossRefGoogle Scholar
  24. Haskins D (2006) Chemical and mineralogical weathering indices as applied to a granite saprolite in South Africa. In: Proceedings 10th IAEG International Congress, IAEG2006 paper number 465. The Geological Society of London. (http://www.iaeg.info2006/start.htm)
  25. Hecht CA, Bonsch C, Bauch E (2005) Relations of rock structure and composition to petrophysical and geomechanical rock properties: examples from Permocarboniferous Red-Beds. Rock Mech Rock Eng 38(3):197–216CrossRefGoogle Scholar
  26. Hill SM (1996) The differential weathering of granitic rocks in Victoria, Australia. J Austr Geol Geophys 16(3):271–276Google Scholar
  27. Howarth DF, Rowlands J (1986) Development of an index to quantify rock texture for qualitative assessment of intact rock properties. Geotech Test J 9(4):169–179CrossRefGoogle Scholar
  28. Hudec P (1998) Rock properties and physical processes of rapid weathering and deterioration. In: Moore DP, Hungr O (eds) Proceedings of 8th International Congress of IAEG, vol 1. Balkema, Rotterdam, pp 341–355Google Scholar
  29. Irfan TY, Dearman WR (1978) The engineering petrography of a weathered granite in Cornwall, England. Q J Eng Geol 11:233–244CrossRefGoogle Scholar
  30. Ismael IS, Hassan MS (2008) Characterization of some Egyptian serpentinites used as ornamental stones. Chin J Geochem 27(2):140–149CrossRefGoogle Scholar
  31. ISRM (1981) Basic geotechnical description of rock masses. International Society of Rock Mechanics, Commission on the Classification of Rock and Rock Masses. Int J Rock Mech Min Sci Geomech Abstr 18:85–110Google Scholar
  32. ISRM (2007) In: Ulusay R, Hudson JA (eds) The complete ISRM suggested methods for characterization, testing and monitoring: 1974–2006. Ankara, ISRM, p 628Google Scholar
  33. Karaca Z, Onargan T (2008) Microfracture of stones under compressive conditions. Int J Rock Mech Min Sci 45(4):638–643CrossRefGoogle Scholar
  34. Labus M (2008) Evaluation of weathering-resistance classes in clastic rocks on the example of Polish sandstones. Envir Geol 54:283–289CrossRefGoogle Scholar
  35. Lan HX, Hu RL, Yue ZQ, Lee CF, Wang SJ (2003) Engineering and geological characteristics of granitic weathering profiles in South China. J Asian Earth Sci 21:353–364CrossRefGoogle Scholar
  36. Lindqvist JE, Akesson U, Malaga K (2007) Microstructure and functional properties of rock materials. Mater Charact 58:1183–1188CrossRefGoogle Scholar
  37. Martínez-Martínez J, Benavente DD, Ordóñez Salvador, García-del-Cura MA (2008) Multivariate statistical techniques for evaluating the effects of brecciated rock fabric on ultrasonic wave propagation. Int J Rock Mech Min Sci 45(4):609–620CrossRefGoogle Scholar
  38. Mendes FM, Aires-Barros L, Rodrigues FP (1966) The use of modal analysis in the mechanical characterization of rock masses. In: Proceedings of the 1st International Congress of Rock Mechanics, Lisbon, vol 1, pp 217–223Google Scholar
  39. Merriam R, Ill HHR, Kim YC (1970) Tensile strength related to mineralogy and texture of some granitic rocks. Eng Geol 4(2):155–160CrossRefGoogle Scholar
  40. Molina E, Cultrone G, Sebastián E, Alonso FJ, Carrizo L, Gisbert J, Buj O (2011) The pore system of sedimentary rocks as a key factor in the durability of building materials. Eng Geol 118:110–121CrossRefGoogle Scholar
  41. Nara Y, Koike K, Yoneda T, Kaneko K (2006) Relation between subcritical crack growth behavior and crack paths in granite. Int J Rock Mech Min Sci 43:1256–1261CrossRefGoogle Scholar
  42. Onodera TF, Asoka KHM (1980) Relation between texture and mechanical properties of crystalline rocks. Bull Assoc Eng Geol 22:173–177Google Scholar
  43. Ordaz J, Esbert RM (1977) Sobre las características físico-mecánicas de algunos granitos industriales de Galicia. Boletín Geológico y Minero 88(1–2):65–71 (139–145)Google Scholar
  44. Ordaz J, Esbert RM, Suárez del Río LM (1978) A proposed petrographical index to define mineral and rock deterioration in granitic rocks. Colloque International Altération et Protection des Monuments en Pierre (RILEM), 2.6, ParisGoogle Scholar
  45. Phillipson SE (2008) Texture, mineralogy, and rock strength in horizontal stress-related coal mine roof falls. Int J Coal Geol 75(3):175–184CrossRefGoogle Scholar
  46. Prikryl R (2006) Assessment of rock geomechanical quality by quantitative rock fabric coefficients: limitations and possible source of misinterpretations. Eng Geol 87:149–162CrossRefGoogle Scholar
  47. Prikryl R, Lokajícek T, Li C, Rudajev V (2003) Acoustic emission characteristics and failure of uniaxially stressed granitic rocks: the effect of rock fabric. Rock Mech Rock Eng 36(4):255–270CrossRefGoogle Scholar
  48. Rigopoulos I, Tsikouras B, Pomonis P, Hatzipanagiotou K (2010) The influence of alteration on the engineering properties of dolerites: the examples from the Pindos and Vourinos ophiolites (northern Greece). Int J Rock Mech Min Sci 47:69–80CrossRefGoogle Scholar
  49. Roubault M (1963) Détermination des minéraux des roches au microscope polarisant. Ed. Lamarre-Poinat, Paris, France, p 368Google Scholar
  50. Shakoor A, Bonelli RE (1991) Relationship between petrographic characteristics, engineering index properties and mechanical properties of selected sandstones. Bull Assoc Eng Geol 28:55–71Google Scholar
  51. Siegesmund S, Dürrast H (2011) Physical and mechanical properties of rocks. In: Siegesmund S, Snethlage R (eds) Stone in Architecture: properties, durability, 4th edn. Springer, Heidelberg, pp 97–226CrossRefGoogle Scholar
  52. Siegesmund S, Török A (2011) Building stones. In: Siegesmund S, Snethlage R (eds) Stone in architecture: properties, durability, 4th edn. Springer, Heidelberg, pp 11–96CrossRefGoogle Scholar
  53. Sousa LMO (2000) Estudo da fracturação e das características físico-mecânicas de granitos da região de Trás-os-Montes com vista à sua utilização como rocha ornamental: dissertation. University of Trás-os-Montes e Alto Douro, PortugalGoogle Scholar
  54. Sousa LMO, Suárez del Río LM, Calleja L, Ruiz de Argandoña V, Rey AR (2005) Influence of microfractures and porosity on the physico-mechanics properties and weathering of ornamental granites. Eng Geol 77:153–168CrossRefGoogle Scholar
  55. Steiger M, Charola E, Sterflinger K (2011) Physical and mechanical properties of rocks. In: Siegesmund S, Snethlage R (eds) Stone in Architecture: properties, durability. Springer, Berlin, pp 227–316CrossRefGoogle Scholar
  56. Streckeisen A (1976) To each plutonic rock its proper name. Earth Sci Rev 12:1–33Google Scholar
  57. Szwedzicki T (2007) A hypothesis on modes of failure of rock samples tested in uniaxial compression. Rock Mech Rock Eng 40(1):97–104CrossRefGoogle Scholar
  58. Takarli M, Prince W, Siddique R (2008) Damage in granite under heating/cooling cycles and water freeze–thaw condition. Int J Rock Mech Min Sci 45(7):1164–1175CrossRefGoogle Scholar
  59. Tercan AE, Ozcelik Y (2006) Canonical ridge correlation of mechanical and engineering index properties. Int J Rock Mech Min Sci 43(1):58–65CrossRefGoogle Scholar
  60. Tiryaki B, Dikmen AC (2006) Effects of rock properties on specific cutting energy in linear cutting of sandstones by picks. Rock Mech Rock Eng 39(2):89–120CrossRefGoogle Scholar
  61. Tugrul A (2004) The effect of weathering on pore geometry and compressive strength of selected rock types from Turkey. Eng Geol 75:215–227CrossRefGoogle Scholar
  62. Tugrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51(4):303–317CrossRefGoogle Scholar
  63. Tullborg E-L, Larson SA (2006) Porosity in crystalline rocks: a matter of scale. Eng Geol 84:75–83CrossRefGoogle Scholar
  64. Ulusay R, Tureli K, Ider MH (1994) Prediction of engineering properties of a selected litharenite sandstone from its petrographic characteristics using correlation and multivariate statistical techniques. Eng Geol 37:135–157CrossRefGoogle Scholar
  65. Ündül Ö, Tuğrul A (2012) The influence of weathering on the engineering properties of dunites. Rock Mech Rock Eng 45:225–239CrossRefGoogle Scholar
  66. Vázquez P, Alonso FJ, Esbert RM, Ordaz J (2010) Ornamental granites: relationships between p-waves velocity, water capillary absorption and the crack network. Constr Build Mater 24:2536–2541CrossRefGoogle Scholar
  67. Whittaker BN, Singh RN, Sun G (1992) Rock fracture mechanics. Elsevier, Amsterdam 570Google Scholar
  68. Wong RHC, Chau KT, Wang P (1996) Microcracking and grain size effect in Yuen Long marbles. Int J Rock Mech Min Sci Geomech Abstr 33(5):479–485CrossRefGoogle Scholar
  69. Woo I, Fleurisson J-L, Park H-J (2006) Classification of weathering for granite and granite gneiss in South Korea. In: Proceedings of 10th IAEG International Congress, IAEG2006 Paper number 131. The Geological Society of London 2006. http://www.iaeg.info2006/start.htm
  70. Yavuz H, Altindag R, Sarac S, Ugur I, Sengun N (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze–thaw and thermal shock weathering. Int J Rock Mech Min Sci 43:767–775CrossRefGoogle Scholar
  71. Yıldız A, Kuşcu MM, Dumlupunar I, Arıtan AE, Bagčı M (2010) The determination of the mineralogical alteration index and the investigation of the efficiency of the hydrothermal alteration on physico-mechanical properties in volcanic rocks from Köprülü, Afyonkarahisar, West Turkey. Bull Eng Geol Environ 69(1):51–61CrossRefGoogle Scholar
  72. Yilmaz NG, Karaca Z, Goktan RM, Akal C (2009) Relative brittleness characterization of some selected granitic building stones: influence of mineral grain size. Constr Build Maters 23(1):370–375CrossRefGoogle Scholar
  73. Zhang L, Ding X, Budhu M (2012) A rock expert system for the evaluation of rock properties. Int J Rock Mech Min Sci 50:124–132CrossRefGoogle Scholar
  74. Zhao J, Brown ET (1992) Thermal cracking induced by water flow through joints in heated granite. Int J Rock Mech Min Sci Geomech Abstr 29:77–82Google Scholar
  75. Zhou X-P, Zhang Y-X, Ha Q-L, Zhu K-S (2008) Micromechanical modelling of the complete stress-strain relationship for crack weakened rock subjected to compressive loading. Rock Mech Rock Eng 41(5):747–769CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  1. 1.Department of GeologyUniversity of Trás-os-Montes e Alto DouroVila RealPortugal

Personalised recommendations