Advertisement

Waste and Biomass Valorization

, Volume 10, Issue 3, pp 521–532 | Cite as

Characterization and Process Optimization of Biochar Produced Using Novel Biomass, Waste Pomegranate Peel: A Response Surface Methodology Approach

  • M. T. H. SiddiquiEmail author
  • Sabzoi NizamuddinEmail author
  • N. M. MubarakEmail author
  • Khaula Shirin
  • Muhammad Aijaz
  • Munir Hussain
  • Humair Ahmed Baloch
Original Paper

Abstract

Agricultural waste is considered as a burden all over the world due to its disposal issues. In this research an effort is made to utilize agricultural residue for the production of cost effective and environmental friendly fuel. The study also focused on investigation of role of best process conditions to get optimized biochar (OB) from the slow pyrolysis of novel biomass, waste pomegranate peel (WPP). The effect and interaction of process parameters including reaction temperature, reaction time and particle size was optimized using central composite design of response surface methodology. The optimized process parameters were found at temperature of 300 °C, reaction time of 20 min and the particle size of 3 mm producing maximum 54.9% of biochar yield. Furthermore, the WPP and OB were considered and compared for physical and chemical analyses including scanning electron microscope (SEM), Fourier transform infrared spectroscopy, thermo gravimetric analysis, and higher heating value (HHV), proximate and ultimate analysis. Considerable modification in structure has been seen in the product which can be observed by SEM analysis. In result of thermal processing through pyrolysis, HHV of OB was improved to 23.5 from 14.61 MJ/kg of parent biomass.

Keywords

Waste pomegranate peel Biochar Slow pyrolysis Response surface methodology Central composite design 

Abbreviations

3D

Three dimensional

ANOVA

Analysis of variances

ASTM

American Standard Testing Materials

C

Carbon

CCD

Central composite design

DOE

Design of Expert

FC

Fixed carbon

F test

Fischer test

FTIR

Fourier transform infrared

H

Hydrogen

HHV

Higher heating value

O

Oxygen

RSM

Response surface methodology

SEM

Scanning electron microscopy

TGA

Thermo-gravimetric analysis

WPP

Waste pomegranate peel

VM

Volatile matter

References

  1. 1.
    Höök, M., Tang, X.: Depletion of fossil fuels and anthropogenic climate change—a review. Energy Policy. 52, 797–809 (2013)CrossRefGoogle Scholar
  2. 2.
    Mofijur, M., et al.: Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction. Renew. Sustain. Energy Rev. 53, 265–278 (2016)CrossRefGoogle Scholar
  3. 3.
    Chandra, R., Takeuchi, H., Hasegawa, T.: Methane production from lignocellulosic agricultural crop wastes: a review in context to second generation of biofuel production. Renew. Sustain. Energy Rev. 16(3), 1462–1476 (2012)CrossRefGoogle Scholar
  4. 4.
    Demirbaş, A.: Biomass resource facilities and biomass conversion processing for fuels and chemicals. Energy Convers. Manag. 42(11), 1357–1378 (2001)CrossRefGoogle Scholar
  5. 5.
    Volli, V., Singh, R.: Production of bio-oil from de-oiled cakes by thermal pyrolysis. Fuel. 96, 579–585 (2012)CrossRefGoogle Scholar
  6. 6.
    Vamvuka, D.: Bio-oil, solid and gaseous biofuels from biomass pyrolysis processes—an overview. Int. J. Energy Res. 35(10), 835–862 (2011)CrossRefGoogle Scholar
  7. 7.
    Balat, M., et al.: Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: pyrolysis systems. Energy Convers. Manag. 50(12), 3147–3157 (2009)CrossRefGoogle Scholar
  8. 8.
    Sahu, S.G., et al.: Thermogravimetric assessment of combustion characteristics of blends of a coal with different biomass chars. Fuel Process. Technol. 91(3), 369–378 (2010)CrossRefGoogle Scholar
  9. 9.
    Nanda, S., et al.: Characterization of North American lignocellulosic biomass and biochars in terms of their candidacy for alternate renewable fuels. Bioenergy Res. 6(2), 663–677 (2013)CrossRefGoogle Scholar
  10. 10.
    Jung, K.-W., et al.: Preparation of modified-biochar from Laminaria japonica: simultaneous optimization of aluminum electrode-based electro-modification and pyrolysis processes and its application for phosphate removal. Bioresour. Technol. 214, 548–557 (2016)CrossRefGoogle Scholar
  11. 11.
    Lee, Y., et al.: Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500 C. Bioresour. Technol. 148, 196–201 (2013)CrossRefGoogle Scholar
  12. 12.
    Crombie, K., et al.: The effect of pyrolysis conditions on biochar stability as determined by three methods. GCB Bioenergy. 5(2), 122–131 (2013)CrossRefGoogle Scholar
  13. 13.
    Intani, K., et al.: Effect of self-purging pyrolysis on yield of biochar from maize cobs, husks and leaves. Bioresour. Technol. 218, 541–551 (2016)CrossRefGoogle Scholar
  14. 14.
    Ismail, K., et al.: Microwave-assisted pyrolysis of palm kernel shell: optimization using response surface methodology (RSM). Renew. Energy. 55, 357–365 (2013)CrossRefGoogle Scholar
  15. 15.
    Anupam, K., et al.: Preparation, characterization and optimization for upgrading Leucaena leucocephala bark to biochar fuel with high energy yielding. Energy. 106, 743–756 (2016)CrossRefGoogle Scholar
  16. 16.
    Moralı, U., Şensöz, S.: Pyrolysis of hornbeam shell (Carpinus betulus L.) in a fixed bed reactor: characterization of bio-oil and bio-char. Fuel. 150, 672–678 (2015)CrossRefGoogle Scholar
  17. 17.
    Huff, M.D., Kumar, S., Lee, J.W.: Comparative analysis of pinewood, peanut shell, and bamboo biomass derived biochars produced via hydrothermal conversion and pyrolysis. J. Environ. Manag. 146, 303–308 (2014)CrossRefGoogle Scholar
  18. 18.
    Kim, K.H., et al.: Influence of pyrolysis temperature on physicochemical properties of biochar obtained from the fast pyrolysis of pitch pine (Pinus rigida). Bioresour. Technol. 118, 158–162 (2012)CrossRefGoogle Scholar
  19. 19.
    Chen, B., Chen, Z., Lv, S.: A novel magnetic biochar efficiently sorbs organic pollutants and phosphate. Bioresour. Technol. 102(2), 716–723 (2011)CrossRefGoogle Scholar
  20. 20.
    Bozkurt, I., et al.: Characterization of bacterial knot disease caused by Pseudomonas savastanoi pv. savastanoi on pomegranate (Punica granatum L.) trees: a new host of the pathogen. Lett. Appl. Microbiol. 59(5), 520–527 (2014)CrossRefGoogle Scholar
  21. 21.
    Said, K.A.M., Amin, M.A.M.: Overview on the response surface methodology (RSM) in extraction processes. J. Appl. Sci. Process Eng. 2(1), 8–17 (2016)Google Scholar
  22. 22.
    Borges, F.C., et al.: Fast microwave assisted pyrolysis of biomass using microwave absorbent. Bioresour. Technol. 156, 267–274 (2014)CrossRefGoogle Scholar
  23. 23.
    Pereira, P.H.F., et al.: Pectin extraction from pomegranate peels with citric acid. Int. J. Biol. Macromol. 88, 373–379 (2016)CrossRefGoogle Scholar
  24. 24.
    Shen, J., et al.: The prediction of elemental composition of biomass based on proximate analysis. Energy Convers. Manag. 51(5), 983–987 (2010)CrossRefGoogle Scholar
  25. 25.
    Nhuchhen, D.R.: Prediction of carbon, hydrogen, and oxygen compositions of raw and torrefied biomass using proximate analysis. Fuel. 180, 348–356 (2016)CrossRefGoogle Scholar
  26. 26.
    Ghani, Z.A., Ishak, M.A.M., Ismail, K.: Direct liquefaction of Mukah Balingian low-rank Malaysian coal: optimization using response surface methodology. Asia Pac. J. Chem. Eng. 6(4), 581–588 (2011)CrossRefGoogle Scholar
  27. 27.
    Mubarak, N., et al.: Synthesis of palm oil empty fruit bunch magnetic pyrolytic char impregnating with FeCl3 by microwave heating technique. Biomass Bioenergy. 61, 265–275 (2014)CrossRefGoogle Scholar
  28. 28.
    Nizamuddin, S., et al.: A critical analysis on palm kernel shell from oil palm industry as a feedstock for solid char production. Rev. Chem. Eng. 32(5), 489–505 (2016)CrossRefGoogle Scholar
  29. 29.
    Uzun, B.B., et al.: Synthetic fuel production from tea waste: characterisation of bio-oil and bio-char. Fuel. 89(1), 176–184 (2010)CrossRefGoogle Scholar
  30. 30.
    Mašek, O., et al.: Influence of production conditions on the yield and environmental stability of biochar. Fuel. 103, 151–155 (2013)CrossRefGoogle Scholar
  31. 31.
    Demirbas, A.: Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues. J. Anal. Appl. Pyrol. 72(2), 243–248 (2004)CrossRefGoogle Scholar
  32. 32.
    Zhang, H., et al.: Comparison of non-catalytic and catalytic fast pyrolysis of corncob in a fluidized bed reactor. Bioresour. Technol. 100(3), 1428–1434 (2009)CrossRefGoogle Scholar
  33. 33.
    Mani, T., et al.: Pyrolysis of wheat straw in a thermogravimetric analyzer: effect of particle size and heating rate on devolatilization and estimation of global kinetics. Chem. Eng. Res. Design. 88(8), 952–958 (2010)CrossRefGoogle Scholar
  34. 34.
    Ola, F., Jekayinfa, S.: Pyrolysis of sandbox (Hura crepitans) shell: effect of pyrolysis parameters on biochar yield. Res. Agric. Eng. 61(4), 170–176 (2015)CrossRefGoogle Scholar
  35. 35.
    Mubarak, N., Yusof, F., Alkhatib, M.: The production of carbon nanotubes using two-stage chemical vapor deposition and their potential use in protein purification. Chem. Eng. J. 168(1), 461–469 (2011)CrossRefGoogle Scholar
  36. 36.
    Abnisa, F., Daud, W.W., Sahu, J.: Optimization and characterization studies on bio-oil production from palm shell by pyrolysis using response surface methodology. Biomass Bioenergy. 35(8), 3604–3616 (2011)CrossRefGoogle Scholar
  37. 37.
    Dairo, O., et al.: Influence of catalyst amount and alcohol-seed ratio on the production of bio-diesel from raw castor oil bean seed using in-situ technique. LAUJET: Ladoke Akintola University. LAUTEC. Nigeria 6(2), 45–52 (2011)Google Scholar
  38. 38.
    Gupta, B.S., Ako, J.E.: Application of guar gum as a flocculant aid in food processing and potable water treatment. Eur. Food Res. Technol. 221(6), 746–751 (2005)CrossRefGoogle Scholar
  39. 39.
    Chang, Y.-M., et al.: Change in MSW characteristics under recent management strategies in Taiwan. Waste Manag. 28(12), 2443–2455 (2008)CrossRefGoogle Scholar
  40. 40.
    Katyal, S., Thambimuthu, K., Valix, M.: Carbonisation of bagasse in a fixed bed reactor: influence of process variables on char yield and characteristics. Renew. Energy. 28(5), 713–725 (2003)CrossRefGoogle Scholar
  41. 41.
    Pütün, A.E., et al.: Fixed-bed pyrolysis of cotton stalk for liquid and solid products. Fuel Process. Technol. 86(11), 1207–1219 (2005)CrossRefGoogle Scholar
  42. 42.
    Telmo, C., Lousada, J., Moreira, N.: Proximate analysis, backwards stepwise regression between gross calorific value, ultimate and chemical analysis of wood. Bioresour. Technol. 101(11), 3808–3815 (2010)CrossRefGoogle Scholar
  43. 43.
    Thines, K., et al.: Synthesis of magnetic biochar from agricultural waste biomass to enhancing route for waste water and polymer application: a review. Renew. Sustain. Energy Rev. 67, 257–276 (2017)CrossRefGoogle Scholar
  44. 44.
    Ahmad, M.A., Puad, N.A.A., Bello, O.S.: Kinetic, equilibrium and thermodynamic studies of synthetic dye removal using pomegranate peel activated carbon prepared by microwave-induced KOH activation. Water Resour. Ind. 6, 18–35 (2014)CrossRefGoogle Scholar
  45. 45.
    Chen, L.-F., et al.: Flexible all-solid-state high-power supercapacitor fabricated with nitrogen-doped carbon nanofiber electrode material derived from bacterial cellulose. Energy Environ. Sci. 6(11), 3331–3338 (2013)CrossRefGoogle Scholar
  46. 46.
    Snyder, R., Strauss, H., Elliger, C.: Carbon-hydrogen stretching modes and the structure of n-alkyl chains. 1. Long, disordered chains. J. Phys. Chem. 86(26), 5145–5150 (1982)CrossRefGoogle Scholar
  47. 47.
    Chen, Y., et al.: Biomass-based pyrolytic polygeneration system on cotton stalk pyrolysis: influence of temperature. Bioresour. Technol. 107, 411–418 (2012)CrossRefGoogle Scholar
  48. 48.
    Yuan, J.-H., Xu, R.-K., Zhang, H.: The forms of alkalis in the biochar produced from crop residues at different temperatures. Bioresour. Technol. 102(3), 3488–3497 (2011)CrossRefGoogle Scholar
  49. 49.
    Cantrell, K.B., et al.: Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar. Bioresour. Technol. 107, 419–428 (2012)CrossRefGoogle Scholar
  50. 50.
    Pang, J., et al.: Catalytic conversion of concentrated miscanthus in water for ethylene glycol production. AlChE J. 60(6), 2254–2262 (2014)CrossRefGoogle Scholar
  51. 51.
    Idris, S.S., et al.: Investigation on thermochemical behaviour of low rank Malaysian coal, oil palm biomass and their blends during pyrolysis via thermogravimetric analysis (TGA). Bioresour. Technol. 101(12), 4584–4592 (2010)CrossRefGoogle Scholar
  52. 52.
    Koufopanos, C., Lucchesi, A., Maschio, G.: Kinetic modelling of the pyrolysis of biomass and biomass components. Can. J. Chem. Eng. 67(1), 75–84 (1989)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V. 2017

Authors and Affiliations

  1. 1.School of EngineeringRMIT UniversityMelbourneAustralia
  2. 2.Department of Chemical Engineering, Faculty of Engineering and ScienceCurtin UniversityMiriMalaysia
  3. 3.Fuel Research Centre (FRC)Pakistan Council of Scientific and Industrial Research (PCSIR)KarachiPakistan
  4. 4.Department of Polymer and Applied SciencePCSIR Laboratories ComplexKarachiPakistan
  5. 5.Muhammad Ali Jinnah UniversityKarachiPakistan

Personalised recommendations