Advertisement

Silicon

pp 1–13 | Cite as

Experimental Evaluation of the Lubrication Performance in MQL Grinding of Nano SiC Reinforced Al Matrix Composites

  • A. Nandakumar
  • T. RajmohanEmail author
  • S. Vijayabhaskar
Original Paper
  • 9 Downloads

Abstract

Metal matrix composites (MMCs) are materials which have been extensively used in the aerospace and automobile industries and have been categorized as hard-to-machine materials.Lubricants participate a significant role in machining, particularly in the grinding process. As a effect of the rising require for environmental safety and the growing number of health problems faced by workers, traditional lubricants are gradually being replaced. This research evaluate the performance of MQL grinding of nano SiC reinforced Al matrix composites using SAE20W40, Cashew nut shell oil and nano Tio2 filled Cashew nut shell oil as base oils. Experiments for grindability study were approved on a horizontal spindle cylindrical grinding machine using Response Surface Methodology. In this research, the influences of n grinding parameters including wheel speed, work piece speed, depth of cut and wt% nano SiC have been considered on the basis of the grinding forces and temperature to develop optimum grinding narration such as lubrication, high biological and ecological safety. The result shows that the application of nano fluid leads to the reduction of tangential forces and grinding zone temperature. Surface integrity of machined surface were studied using Scanning electron microscopy (SEM).

Keywords

Minimum Quantity Lubrication (MQL) Grinding Cashew nut shell oil Nano SiC particles Nano TiO2 Variable frequency drive Infra-red thermometer 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Mazahery A, Shabani MO (2012) Characterization of cast A356 alloy reinforced with nano SiC composites. Trans Nonferrous Metals Soc China 22(2):275–280.  https://doi.org/10.1016/s1003-6326(11)61171-0 CrossRefGoogle Scholar
  2. 2.
    Mazahery A, Shabani MO (2012) Mechanical properties of A356 matrix composites reinforced with nano-SiC particles. Strength Mater 44(6):686–692.  https://doi.org/10.1007/s11223-012-9423-0 CrossRefGoogle Scholar
  3. 3.
    Mazahery A, Alizadeh M, Shabani MO (2012) Study of tribological and mechanical properties of A356–Nano SiC composites. Trans Indian Inst Metals 65(4):393–398CrossRefGoogle Scholar
  4. 4.
    Mazahery A, Shabani MO, Alizadeh M, Tofigh AA (2012) Concurrent fitness evaluations in searching for the optimal process conditions of Al matrix nanocomposites by linearly decreasing weight. J Compos Mater 47(14):1765–1772.  https://doi.org/10.1177/0021998312451298 CrossRefGoogle Scholar
  5. 5.
    Ostad Shabani M, Mazahery A (2013) Fabrication of AMCs by spray forming: setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process. Ceram Int 39(5):5271–5279.  https://doi.org/10.1016/j.ceramint.2012.12.028 CrossRefGoogle Scholar
  6. 6.
    Rajmohan T, Palanikumar K (2013) Modeling and analysis of performances in drilling hybrid metal matrix composites using D-optimal design. Int J Adv Manuf Technol 64:1249–1261CrossRefGoogle Scholar
  7. 7.
    Wang Y, Li a C, Zhang Y, Yang M, Zhang X, Zhang N, Dai J (2017) Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids. J Clean Prod 142:3571–3583CrossRefGoogle Scholar
  8. 8.
    Chetan GS, Venkateswara Rao P (2015) Application of sustainable techniques in metal cutting for enhanced machinability: a review. J Clean Prod 100:17–34CrossRefGoogle Scholar
  9. 9.
    Guo S, Li C, Zhang Y, Wang Y, Li B, Yang M, Zhang X, Liu G (2017) Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy. J Clean Prod 140:1060–1076CrossRefGoogle Scholar
  10. 10.
    Tawakoli T, Hadad M, Sadeghi MH, Sadeghi ADB (2011) Minimum quantity lubrication in grinding: effects of abrasive and coolant-lubricant types. J Clean Prod 19:2088–2099CrossRefGoogle Scholar
  11. 11.
    Dinesh Setti N, Sinha MK, Ghosh S, VenkateswaraRao P (2015) Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nano fluids. Int J Mach Tool Manu 88:237–248CrossRefGoogle Scholar
  12. 12.
    Li B, Li C, Zhang Y, Wang Y, Jia D, MinYang NZ, Wu Q, Han Z, Sun K (2017) Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil.  https://doi.org/10.1016/j.jclepro.2017.03.213
  13. 13.
    Singh RK, Sharma AK, Dixit AR, Tiwari AK, Pramanik A, Mandal A (2017) Performance evaluation of alumina -graphene hybrid nano - cutting fluid in hard turning.  https://doi.org/10.1016/j.jclepro.2017.06.104
  14. 14.
    Li SGC, Zhang Y, Wang Y, Li B, Yang M, Zhang X, Liu G (2016) Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy. J Clean Prod 140:1060–1076.  https://doi.org/10.1016/j.jclepro.2016.10.073 CrossRefGoogle Scholar
  15. 15.
    Estela Peralta Álvarez M, Bárcena MM, González FA (2016) On the sustainability of machining processes. Proposal for a unified framework through the triple bottom-line from an understanding review. J Clean Prod 142:3890–3904.  https://doi.org/10.1016/j.jclepro.2016.10.071 CrossRefGoogle Scholar
  16. 16.
    Gajrani KK, Ram D, Ravi Sankar M (2017) Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques. J Clean Prod 165:1420–1435.  https://doi.org/10.1016/j.jclepro.2017.07.217 CrossRefGoogle Scholar
  17. 17.
    Sani ASA, Rahim EBD, Sharif S, Sasahara H (2018, 2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. J Clean Prod.  https://doi.org/10.1016/j.jclepro.2018.10.317
  18. 18.
    Singh RK, Sharma AK, RaiDixit A, Tiwari AK, Pramanik A, Mandal A (2017) Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning. J Clean Prod 162:830–845.  https://doi.org/10.1016/j.jclepro.2017.06.104 CrossRefGoogle Scholar
  19. 19.
    Mao C, Tang XJ, Zou HF, Huang XM, Zhou ZX (2012) Investigation of grinding characteristic using nanofluid minimum quantity lubrication. Int J Precis Eng Manuf 13(10):1745–1752CrossRefGoogle Scholar
  20. 20.
    Setti D, Sinha MK, Ghosh S, Rao PV (2015) Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of Nano fluids. Int J Mach Tools Manuf 88:237–248CrossRefGoogle Scholar
  21. 21.
    Zhang YB, Li CH, Jia DZ, Zhang DK, Zhang XW (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manuf 99:19–33CrossRefGoogle Scholar
  22. 22.
    Rajmohan T (2016) Experimental investigation and optimization of machining parameters in drilling of fly ash filled carbon fibre reinforced composites. Part Sci Technol:1–10Google Scholar
  23. 23.
    Shabani MO, Shamsipour M, Mazahery A (2018) Performance of ANFIS coupled with PSO in manufacturing superior wear resistant aluminum matrix Nano composites. Trans Indian Inst Metals 71:2095–2103CrossRefGoogle Scholar
  24. 24.
    Baskar S, Sriram G, Arumugam S (2015) Fuzzy logic model to predict oil-film pressure in a hydrodynamic journal bearing lubricated under the influence of nano-based bio-lubricants– Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 4:449–454Google Scholar
  25. 25.
    Sijo MT, Jayadevan KR (2016) Analysis of stir cast aluminium silicon carbide metal matrix composites: a comprehensive review. Procedia Technol 24:379–385CrossRefGoogle Scholar
  26. 26.
    Yu S, Le Gong BL, Liu Z, Chen D (2016) Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning. Int J Adv Manuf Technol 83:2083–2089CrossRefGoogle Scholar
  27. 27.
    Vijayabhaskar S, Rajmohan T (2018) Experimental investigation and optimization of machining parameters in WEDM of Nano-SiC particles reinforced magnesium matrix composites. Silicon.  https://doi.org/10.1007/s12633-017-9676-0
  28. 28.
    Gupta MK, Sood PK, Sharma VS (2015) Parameters optimization of titanium alloy using response surface methodology and particle machining swarm optimization under minimum quantity lubrication environment. Mater Manuf Process 31(13):1671–1682CrossRefGoogle Scholar
  29. 29.
    Rabiei F, Rahimi AR, Hadad MJ, Ashrafijou M (2014) Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization. J Clean Prod 86:447–460CrossRefGoogle Scholar
  30. 30.
    Thiagarajan C, Sivaramakrishnan R, Somasundaram S (2011) Cylindrical grinding of sic particles reinforced aluminium metal matrix composites. ARPN J Eng Appl Sci 6(1)Google Scholar
  31. 31.
    Hadad MJ, Tawakoli T, Sadeghi MH, Sadeghi B (2012) Temperature and energy partition in minimum quantity lubrication-MQL grinding process. Int J Mach Tool Manu 54-55:10–17CrossRefGoogle Scholar
  32. 32.
    Jeevanantham s SNM, Robinson Smart DS, Nallusamy S, Manikanda Prabu N (2017) Effect of machining parameters on MRR and surface roughness in internal grinding using EN8, EN31 steel. Int J Appl Eng Res 12:2963–2968Google Scholar
  33. 33.
    Mao C, Zhang J, Huang Y, Zou H, Huang X, Zhou Z (2013) Investigation on the effect of nanofluid parameters on MQL grinding. Mater Manuf Process 23:436–442CrossRefGoogle Scholar
  34. 34.
    Sharma J, Sidhu BS (2014) Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. J Clean Prod 66:619–623CrossRefGoogle Scholar
  35. 35.
    Tiwari AK, Ghosh P, Sarkar J (2012) Investigation of thermal conductivity and viscosity of nanofluids. J Environ Res Dev 7(2):768–777Google Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringSri Chandrasekharendra Saraswathi Viswa Maha VidyalayaKanchipuramIndia

Personalised recommendations