Advertisement

Silicon

pp 1–11 | Cite as

Determination of Strength Parameters of Glass Fibers Reinforced Composites for Engineering Applications

  • M. Muralidhar Singh
  • Harinandan KumarEmail author
  • G. Hemath Kumar
  • P. Sivaiah
  • K. V. Nagesha
  • K. M. Ajay
  • G. Vijaya
Original Paper
  • 3 Downloads

Abstract

The manufacturing of the composite material has been developed tremendously over the years due to its superior properties like low density, stiffness, lightweight and excellent mechanical as well as physical properties. These exceptional properties of composite materials have found its applications widely in aerospace, automotive, marine and many more engineering areas. The synthesis of the varieties of composites is continuously lookout without compromising its mechanical and physical properties. This paper deals in with synthesis as well as mechanical properties (Tensile Strength, Flexural Properties and Fatigue) of Glass-Epoxy as well as Glass-Vinyl Ester composites. The resins used in combination of composites were epoxy as well as Vinyl Ester while the reinforced material was glass fibers. The ultimate tensile strength in Glass-Epoxy composite was observed from 330 to 370 MPa while it was 270 to 330 MPa for Glass-Vinyl Ester Composites. Glass-Epoxy composites showed a 32% increase in flexural strength due to post-curing strength while it was 16% in case of Glass-Vinyl Ester Composites. The results of the fatigue analysis of composites indicate faster growth of cracks and defects at higher frequencies which results in a rapid drop in stress levels in the test specimen. The statistical analysis was carried out to establish mutual correlation among mechanical as well as physical properties.

Keywords

Fiber reinforced composites Glass-epoxy Glass-vinyl Ester Mechanical properties Statistical analysis 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors gratefully acknowledge the support from management of R.V. College of Engineering, Bangalore, India.

References

  1. 1.
    Sivasaravanan S, Bupesh Raja V K, Manikandan (2014) Impact Characterization of Epoxy LY556/E-Glass Fibre/ Nano Clay Hybrid Nano Composite Materials. Procedia Engineering 97:968–974Google Scholar
  2. 2.
    Velmurugan R, Mohan TP (2004) Room temperature processing of epoxy-clay nano composites. J Mater Sci 39:7333–7339CrossRefGoogle Scholar
  3. 3.
    Malkapuram R, Kumar V, Yuvraj SN (2008) Recent development in natural fibre reinforced polypropylene composites. J Reinf Plast Compos 28:1169–1189CrossRefGoogle Scholar
  4. 4.
    Ramesh M, Sudharsan P (2018) Experimental Investigation of Mechanical and Morphological Properties of Flax-Glass Fiber Reinforced Hybrid Composite using Finite Element Analysis. Silicon 3:747-757.  https://doi.org/10.1007/s12633-016-9526-5
  5. 5.
    Ramnath B V, Elanchezhian C, Nirmal PV, Prem Kumar G, Santhosh Kumar V, Karthick S, Rajesh S, Suresh K (2014) Experimental investigation of mechanical behavior of jute-flax based glass Fiber reinforced composite. J Fibers and Polymers 15:1251–1262Google Scholar
  6. 6.
    Athijayamani A, Thiruchitrambalam M, Manikandan V, Pazhanivel B (2010) Mechanical properties of natural fibers reinforced polyester hybrid composite. Int J Plast Technol 11:104–116CrossRefGoogle Scholar
  7. 7.
    Soudmand B H, S Nezhad K (2016) Experimental investigation on the mechanical properties of co-polypropylene/GF/CaCO3 hybrid nanocomposites. J Polymer Science Series A 58:454–463Google Scholar
  8. 8.
    Ming IWM, Azmi AI, Chuan LC, Mansor AF (2017) Experimental study and empirical analyses of abrasive waterjet machining for hybrid carbon/glass fiber-reinforced composites for improved surface quality. Int J Adv Manuf Technol 95(1–14):3809–3822 http://sci-hub.tw/10.1007/s00170-017-1465-9 Google Scholar
  9. 9.
    Nuruzzaman DM, Iqbal AKMA, Oumer AN, Ismail NM, Basri S (2016) Experimental investigation on the mechanical properties of glass fiber reinforced nylon. IOP Conference on Materials Science and Engineering 114:1–7Google Scholar
  10. 10.
    Thwe MM, Lia K (2002) Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Compos A: Appl Sci Manuf 33:43–52CrossRefGoogle Scholar
  11. 11.
    Liang S, Gning PB, Guillaumat L (2014) Properties evolution of flax/epoxy composites under fatigue loading. Int J Fatigue 63:36–45CrossRefGoogle Scholar
  12. 12.
    Zhang Y, Li Y, Ma H, Yu T (2013) Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites. Compos Sci Technol 88:172–177CrossRefGoogle Scholar
  13. 13.
    Li Y, Mai YW, Ye L (2000) Sisal fiber and its composites: a review of recent developments. Compos Sci Technol 60:2037–2055CrossRefGoogle Scholar
  14. 14.
    Ou Y, Zhu D, Zhang H, Huang L, Yao Y, Li G, Mobasher B (2016) Mechanical characterization of the tensile properties of glass Fiber and its reinforced polymer (GFRP) composite under varying strain rates and temperatures. Polymers 8:2–16CrossRefGoogle Scholar
  15. 15.
    Wazerya MS, Elamya MI, Zoalfakar SH (2017) Mechanical properties of glass Fiber reinforced polyester composites. J Applied Science and Engineering 14:121–131Google Scholar
  16. 16.
    Fazle Elahi AHM, Hossain MM, Afrin S, Khan MA (2014) Study on the mechanical properties of glass Fiber reinforced polyester composites. International Conference on Mechanical, Industrial and Energy EngineeringGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  • M. Muralidhar Singh
    • 1
  • Harinandan Kumar
    • 2
    Email author
  • G. Hemath Kumar
    • 1
  • P. Sivaiah
    • 1
  • K. V. Nagesha
    • 1
  • K. M. Ajay
    • 3
  • G. Vijaya
    • 4
  1. 1.Madanapalle Institute of Technology and ScienceMadanapalleIndia
  2. 2.Department of Petroleum and Earth SciencesUniversity of Petroleum and Energy StudiesDehradunIndia
  3. 3.R. V. College of EngineeringBangaloreIndia
  4. 4.Dayananda Sagar Academy of Technology and ManagementBangaloreIndia

Personalised recommendations