Advertisement

Silicon

pp 1–15 | Cite as

Experimental Studies in Micro Channelling on Borosilicate Glass Using RSM Optimization Technique

  • Abhishek CharakEmail author
  • C. S. Jawalkar
Original Paper
  • 11 Downloads

Abstract

The electrochemical discharge machining (ECDM) is a preferred process for micromachining non-conducting materials since it has several desirable properties such as good material removal rates and surface roughness. It is an emerging technology having numerous applications. It is a thermal process, which produces some heat affected zones, which lead to lower thermal conductivity and higher chemical reactivity within the electrolyte. These properties lead to a reduction in tool life, while machining. In the presented work, ECDM was employed in machining borosilicate glass, and the technique of “Response Surface Methodology (RSM)” was attempted. Using different process parameters, i.e., applied voltage, electrolyte concentration, tool feed and tool rotation; optimization was carried out. Thus the relations between input and response parameters have been established for minimizing the values of tool wear (cathode and anode wear). RSM results illustrated good agreement with the experimental values. Scanning electron microscopy (SEM) was carried out for closely investigating the heat affected zones. In the illustrated experimnental condictions, tool wear (0.5 mg) and material removal (2.5 mg) were the most influencing parameters amongst others.

Keywords

ECDM Response surface methodology Material removal Tool Wear SEM 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

References

  1. 1.
    Kulkarni A, Sharan R, Lal GK (2002 Aug 1) An experimental study of discharge mechanism in electrochemical discharge machining. Int J Mach Tools Manuf 42(10):1121–1127CrossRefGoogle Scholar
  2. 2.
    Charak A, Jawalkar CS (2017 Oct 1) Technological landscaping on electro chemical discharge machining of non-conducting materials. i-Manager's J Material Sci 5(3):31CrossRefGoogle Scholar
  3. 3.
    Ghosh A (1997 Jun 1) Electrochemical discharge machining: principle and possibilities. Sadhana. 22(3):435–447CrossRefGoogle Scholar
  4. 4.
    Jawalkar CS, Sharma AK, Kumar P (2014 Jan 1) Investigations on performance of ECDM process using NaOH and NaNO3 electrolytes while micro machining soda lime glass. Int J Manuf Technol Manag 28(1–3):80–93CrossRefGoogle Scholar
  5. 5.
    Gupta PK, Dvivedi A, Kumar P (2015 Jun 1) Developments on electrochemical discharge machining: a review of experimental investigations on tool electrode process parameters. Proceedings of the Institution of Mechanical Engineers Part B-J Engr Manufacture 229(6):910–920CrossRefGoogle Scholar
  6. 6.
    Wüthrich R, Fascio V (2005 Jul 1) Machining of non-conducting materials using electrochemical discharge phenomenon—an overview. Int J Mach Tools Manuf 45(9):1095–1108CrossRefGoogle Scholar
  7. 7.
    Antil P (2018) Experimental analysis on Wear behavior of PMCs reinforced with Electroless coated silicon carbide particulates. Silicon:1–10Google Scholar
  8. 8.
    Singh M, Singh S (2018) Machining of difficult to cut materials by electrochemical discharge machining (ECDM) process: a state of art approach. InAdvanced manufacturing and materials science. Springer, Cham, pp 139–149Google Scholar
  9. 9.
    Singh YP, Jain VK, Kumar P, Agrawal DC (1996 Mar 1) Machining piezoelectric (PZT) ceramics using an electrochemical spark machining (ECSM) process. J Mater Process Technol 58(1):24–31CrossRefGoogle Scholar
  10. 10.
    Jain VK, Kalia S, Sidpara AM (2012 Apr 1) Some aspects of fabrication of micro devices by electrochemical micromachining (ECMM) and its finishing by magnetorheological fluid. Int J Adv Manuf Technol 59(9–12):987–996CrossRefGoogle Scholar
  11. 11.
    Kramer D, Rehsteiner F, Schumacher B (1999 Jan 1) ECD (electrochemical in-process controlled dressing), a new method for grinding of modern high-performance cutting materials to highest quality. CIRP Annals-Manufacturing Technology 48(1):265–268CrossRefGoogle Scholar
  12. 12.
    Schöpf M, Beltrami I, Boccadoro M, Kramer D, Schumacher B (2001 Jan 1) ECDM (electro chemical discharge machining), a new method for trueing and dressing of metal bonded diamond grinding tools. CIRP Annals-Manufacturing Technology 50(1):125–128CrossRefGoogle Scholar
  13. 13.
    Ghosh A, Muju MK, Parija S, Kanjrathinkal A (1997 Sep 1) Microwelding using electrochemical discharge. Int J Mach Tools Manuf 37(9):1303–1312CrossRefGoogle Scholar
  14. 14.
    Kulkarni AV, Jain VK (2005 Feb) Micro-fabrication using electrochemical spark. InProceedings of Indo-Japan Workshop, IIT Kanpur 21:21–25Google Scholar
  15. 15.
    Liu JW, Yue TM, Guo ZN (2010 Jan 1) An analysis of the discharge mechanism in electrochemical discharge machining of particulate reinforced metal matrix composites. Int J Mach Tools Manuf 50(1):86–96CrossRefGoogle Scholar
  16. 16.
    Fascio V, Wuthrich R, Viquerat D, Langen H 3D microstructuring of glass using electrochemical discharge machining (ECDM). InMicromechatronics and Human Science, 1999. MHS'99. Proceedings of 1999 international symposium on 1999, pp 179–183Google Scholar
  17. 17.
    Lee ES, Howard D, Liang E, Collins SD, Smith RL (2004 Jan 19) Removable tubing interconnects for glass-based micro-fluidic systems made using ECDM. J Micromech Microeng 14(4):535–541CrossRefGoogle Scholar
  18. 18.
    Sabahi N, Hajian M, Razfar MR (2018) Experimental study on the heat-affected zone of glass substrate machined by electrochemical discharge machining (ECDM) process. Int J Adv Manuf Technol 97(1–8):1557–1564CrossRefGoogle Scholar
  19. 19.
    Elhami S, Razfar MR (2017 Jan 1) Analytical and experimental study on the integration of ultrasonically vibrated tool into the micro electro-chemical discharge drilling. Precis Eng 47:424–433CrossRefGoogle Scholar
  20. 20.
    Kolhekar KR, Sundaram M (2016 Jan 1) A study on the effect of electrolyte concentration on surface integrity in micro electrochemical discharge machining. Procedia CIRP 45:355–358CrossRefGoogle Scholar
  21. 21.
    Sabahi N, Razfar MR, Hajian M (2017 Dec 1) Experimental investigation of surfactant-mixed electrolyte into electrochemical discharge machining (ECDM) process. J Mater Process Technol 250:190–202CrossRefGoogle Scholar
  22. 22.
    Hajian M, Razfar MR, Movahed S (2016 Jul 1) An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass. Precis Eng 45:322–331CrossRefGoogle Scholar
  23. 23.
    Goud M, Sharma AK, Jawalkar C (2016 Jul 1) A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate. Precis Eng 45:1–7CrossRefGoogle Scholar
  24. 24.
    Myers RH, Montgomery DC (1995 Jul 1) Response surface methodology: process and product optimization using designed experiments. Wiley, New YorkGoogle Scholar
  25. 25.
    V CD (2016 Apr 30) Response surface methodology and desirability approach to optimize EDM parameters. Int J Hybrid Inf Tech 9(4):393–406CrossRefGoogle Scholar
  26. 26.
    Saini A, Chauhan P, Pabla BS, Dhami SS (2016) Multi-process parameter optimization in face milling of ti6al4v alloy using response surface methodology. Proc Inst Mech Eng B J Eng Manuf 0954405416673682Google Scholar
  27. 27.
    Pradhan BB, Bhattacharyya B (2009 Jun 1) Modelling of micro-electrodischarge machining during machining of titanium alloy Ti—6Al—4V using response surface methodology and artificial neural network algorithm. Proc Inst Mech Eng B J Eng Manuf 223(6):683–693CrossRefGoogle Scholar
  28. 28.
    Kumar V, Singh H (2019) Rotary ultrasonic Drilling of Silica Glass BK-7: microstructural investigation and process optimization through TOPSIS. Silicon 11(1):471–485CrossRefGoogle Scholar
  29. 29.
    Paul L, Hiremath SS (2013 Jan 1) Response surface modelling of micro holes in electrochemical discharge machining process. Procedia Engineering 64:1395–1404CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Department of Production & Industrial EngineeringPunjab Engineering CollegeChandigarhIndia

Personalised recommendations