Advertisement

Silicon

, Volume 11, Issue 2, pp 807–815 | Cite as

Fabrication and Characterization of Glass and Glass-Ceramic from Cement Dust and Limestone Dust

  • K. H. S. ShaabanEmail author
  • Y. B. Saddeek
  • K. A. Aly
  • A. Dahshan
  • Atif Mossad Ali
Original Paper
  • 38 Downloads

Abstract

Recycling the solid wastes like cement dust and limestone dust and using in the manufacturing of glass and glass - ceramics are strongly needed. These glasses fabricated by melt-quench technique. The X-ray diffraction (XRD) patterns of all the studied samples confirmed the amorphous nature These glasses have been investigated for their physical properties using density and molar volume, structural properties using FTIR spectroscopy, optical properties using UV-Vis spectroscopy, thermal analysis and mechanical properties. The density, molar volume and refractive index vary with the concentration of CaO. The variations of various physical, structural, thermal analyses, mechanical and optical properties with the concentration of CaO in this glass system depict a strong structural influence of CaO. The ultrasonic velocity of these glasses has been decreased with addition of CaO, this decrease is connected to the decreasing the bonding strength between Calcium - oxygen are lower than the bond between silicon - oxygen (32-106 k cals).The elastic moduli of these glasses determined experimentally and calculated theoretically, according to Makishima–Mackenzie model decreased with increasing of CaO. This behavior may be related to changing the coordination number with an increasing of CaO and the decrease in the average force constant and crosslink density. The crystalline phase of the prepared glass ceramic is diopside with the chemical formula (Ca MgO6 Si) in all selected samples.

Keywords

Wastes Ceramics IR Mechanical properties XRD 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

The author (prof. Atif Mossad Ali) extend his appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through research groups program under grant number R.G.P. 2/8/38.

References

  1. 1.
    Lee CS, Matori KA, Sidek HJ, Aziz AB, Kamari HM, Ismail I, Zaid MHM (2017) Fabrication and characterization of glass and glass-ceramic from rice husk ash as a potent material for opto-electronic applications. J Mater Sci Mater Electron.  https://doi.org/10.1007/s10854-017-7699-3
  2. 2.
    El-Alaily NA, Abou Hussein EM, Ezz ElDin FM (2018) Chemical and optical degradation of some glass formulated from common municipal solid waste; decorated glass. Silicon.  https://doi.org/10.1007/s12633-017-9717-8
  3. 3.
    Bień J, Celary P, Wystalska K (2017) The problems in achieving sustainable development in the Tannery industry in regard to sewage sludge management. J Ecol Eng 18(6):13–20CrossRefGoogle Scholar
  4. 4.
    Kritikaki A, Zaharaki D, Komnitsas K (2016) Valorization of industrial wastes for the production of glass–ceramics 7:885–898.  https://doi.org/10.1007/s12649-016-9480-x
  5. 5.
    Soltan A, Taman Z, El-Kaliouby B (2011) Recycling of ornamental stones hazardous wastes. Nat Resour 2(4):244–249.  https://doi.org/10.4236/nr.2011.24031 Google Scholar
  6. 6.
    Saddeek YB, Aly KA, Farag RS, Uosif MAM, Shaaban KS (2016) Fabrication and physical characteristics of new glasses from wastes of limestone and phosphorite rocks. Bull Mater Sci 39(7):1791–1799.  https://doi.org/10.1007/s12034-016-1334-4 CrossRefGoogle Scholar
  7. 7.
    Shaaban KS, Saddeek YB, Aly KA, Dahshan A (2018) Synthesis and physical characteristics of new glasses from some environmental wastes. Silicon.  https://doi.org/10.1007/s12633-018-9808-1
  8. 8.
    Saddeek YB, Aly KA, Shaaban KS, Uosif MAM (2016) Farag RS, Some physical features of glasses synthesized from some environmental wastes. Silicon.  https://doi.org/10.1007/s12633-016-9470-4, Verma KD
  9. 9.
    Saddeek YB, Shaaban KS, Aly KA, Farag RS, Uosif MAM (2015) Studying effect of SiO2 on elastic properties of glasses based on environmental tailings using a nondestructive ultrasonic method. Int J New Hor Phys 2(2):53–57Google Scholar
  10. 10.
    Shaaban KS, Abo-naf SM, Abd Elnaeim AM, Hassouna MEM (2017) Studying effect of MoO3 on elastic and crystallization behavior of lithium diborate glasses. Appl Phys A 123: 457CrossRefGoogle Scholar
  11. 11.
    Saddeek YB, Hassan HS, Abd Elfadeel G (2014) Fabrication and analysis of new bismuth borate glasses containing cement kiln dust. J Non-Cryst Solids 403:47–52CrossRefGoogle Scholar
  12. 12.
    Saddeek YB, Mostafa AMA, Abd Elfadeel G (2017) Effect of cement kiln dust and gamma irradiation on the ultrasonic parameters of HMO borate glasses. Nucl Instrum Methods Phys Res Section B Beam Inter Mater Atoms 394.  https://doi.org/10.1016/j.nimb.2016.12.041
  13. 13.
    Saddeek YB, Mohamed GY, Hassan HS, Abd Elfadeel G (2015) FTIR Spectroscopic features of -ray influence on new cement kiln dust based glasses J Physica Scripta 90(2).  https://doi.org/10.1088/0031-8949/90/8/085702
  14. 14.
    Khater GA (2010) Glass-ceramics in the CaO–MgO–Al2 O 3–SiO2 system based on industrial waste materials. J Non-Cryst Solids 356:3066–3070CrossRefGoogle Scholar
  15. 15.
    Hammad AH, Abdelghany AM, ElBatal HA (2017) Thermal, structural, and morphological investigations of modified bismuth silicate glass-ceramics. Silicon 9(2):239–248CrossRefGoogle Scholar
  16. 16.
    Laopaiboon R, Bootjomchai C (2013) Influence of CeO2 on structural properties of glasses by using ultrasonic technique: Comparison between the local sand and SiO2. Ultrasonics 53:907–912CrossRefGoogle Scholar
  17. 17.
    Makishima A, Mackenzie JD (1973) Direct calculation of young’s modulus. J Non-Cryst Solids 12:35–45CrossRefGoogle Scholar
  18. 18.
    Makishima A, Mackenzie JD (1975) Calculation of bulk modulus, shear modulus, and Poisson’s ratio. J Non-Cryst Solids 17:147–157CrossRefGoogle Scholar
  19. 19.
    Doweidar H, Saddeek YB (2009) FTIR and ultrasonic investigations on modified bismuth borate glasses. J Non-Cryst Solids 3:348–355CrossRefGoogle Scholar
  20. 20.
    Elkhoshkhany N, Khatab MA, Kabary MA (2017) Thermal, FTIR and UV spectral studies on tellurite glasses doped with cerium oxide. Ceram Int.  https://doi.org/10.1016/j.ceramint.2017.11.019
  21. 21.
    Iordanova R, Dimitrov V, Dimitriev Y, Klissurski D (1994) Glass formation and structure of glasses in the V2O5-MoO3-Bi2O3 system. J Non-Cryst Solids 180:58–65CrossRefGoogle Scholar
  22. 22.
    Shaaban KS, Saddeek YB, Aly KA (2018) Physical properties of Dy2O3 in Na2B4O7 - SiO2 - MoO3 glasses. Ceram Int 44:3862–3867CrossRefGoogle Scholar
  23. 23.
    ElBatal FH, Abdelghany AM, ElBatal HA (2014) Characterization by combined optical and FT infrared spectra of 3d-transition metal ions doped-bismuth silicate glasses and effects of gamma irradiation. Spectrochimica Acta (A) 122:461CrossRefGoogle Scholar
  24. 24.
    Kool A, Thakur P, Bagchi B, Sukhen NAH (2015) Mechanical, dielectric and photoluminescence properties of alumina–mullet composite derived from natural Ganges clay. J Appl Clay Sci 114:349–358CrossRefGoogle Scholar
  25. 25.
    Shaaban KS, Saddeek YB (2017) Effect of MoO3 content on structural, thermal, mechanical and optical properties of (B2O3-SiO2-Bi2O3-Na2O-Fe2O3) glass system. Silicon 9(5):785–793CrossRefGoogle Scholar
  26. 26.
    Varshneya AK (1994) Fundamental of inorganic glasses. Academic Press, New YorkGoogle Scholar
  27. 27.
    Saddeek Y, Abd El Latif L, Abd El Aal NS (2007) Interpretation of mechanical properties and structure of TeO2 –Li2O–B2O3 glasses. Physica B 348:475–480CrossRefGoogle Scholar
  28. 28.
    Soga N (1985) Elastic properties of clinopyroxene based glasses along diopside (CaMgSi2 O 6)-Jadeite (NaAlSi2 O 6). J Non-Cryst Solids 73:305CrossRefGoogle Scholar
  29. 29.
    El-Mallawany R, Afifi HA, El-Gazery M, Ali AA (2018) Effect of Bi2 O 3addition on the ultrasonic properties of pentaternary borate glasses. Measurement 116:314–317CrossRefGoogle Scholar
  30. 30.
    Aly KA (2009) Optical properties of Ge–Se–Te wedge-shaped films by using only transmission spectra. J Non-Cryst Solids 355:1489–1495CrossRefGoogle Scholar
  31. 31.
    Aly KA, Abousehly AM, Osman MA, Othman AA (2008) Structure, optical and electrical properties of Ge 30Sb 10Se 60 thin films. J Physica B: Cond Matter 403(10–11):1848– 1853CrossRefGoogle Scholar
  32. 32.
    Okasha A, Marzouk SY, Hammad AH, Abdelghany AM (2017) Optical character inquest of cobalt containing fluoroborate glass. Optik – Int J Light Electron Opt 142:125–133CrossRefGoogle Scholar
  33. 33.
    Mott NF, Davis EA (1977) Electronic processes in non-crystalline materials, 2nd edn. Oxford University Press, OxfordGoogle Scholar
  34. 34.
    Sushama D, Predeep P (2014) Thermal and optical studies of rare earth doped tungsten–tellurite glasses. Intentional J Appl Phys Math 4:139–143CrossRefGoogle Scholar
  35. 35.
    Ramadan RM, Abdelghany AM, ElBatal HA (2016) Gamma rays interactions with Bismuth phosphate glasses doped with 3d transition metal oxides. Silicon 8:313–324.  https://doi.org/10.1007/s12633-016-9545-2 CrossRefGoogle Scholar
  36. 36.
    Halimah MK, Chiew WH, Sidek HAA, Daud WM, Wahab ZA, Khamirul AM, Iskandar SM (2014) Optical properties of lithium borate glass (Li2O) x (B2O3)1-x (Sifat Optik Kaca Litium Borat). Sains Malaysiana 43(6):899–902Google Scholar
  37. 37.
    Thompson RM, Downs RT (2008) The crystal structure of diopside at pressure to 10 GPa locality: DeKalb, New York Sample: P = 2.32 GPa. Am Mineralogist 93:177–186CrossRefGoogle Scholar
  38. 38.
    Wu C, Ramaswamy Y, Zreiqat H (2010) Porous diopside (CaMgSi2 O 6) scaffold: a promising bioactive material for bone tissue engineering. Acta Biomater 6:2237–2245CrossRefGoogle Scholar
  39. 39.
    Wu C, Chang J (2013) A review of bioactive silicate ceramics. Biomed Mater 8:032001.  https://doi.org/10.1088/1748-6041/8/3/032001 CrossRefGoogle Scholar
  40. 40.
    Carter S, Ponton CB, Rawlings RD, Rogers PS (1988) Microstructure, chemistry, elastic properties and internal-friction of silceram glass-ceramics. J Mater Sci 23:2622–2630CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.Chemistry Department, Faculty of ScienceAl - Azhar UniversityAssiutEgypt
  2. 2.Physics Department, Faculty of ScienceAl - Azhar UniversityAssiutEgypt
  3. 3.Physics Department, Faculty of Science and Arts KhulaisUniversity of JeddahJeddahSaudi Arabia
  4. 4.Research Center for Advanced Materials Science (RCAMS)King Khalid UniversityAbhaSaudi Arabia
  5. 5.Department of Physics, Faculty of SciencePort Said UniversityPort SaidEgypt
  6. 6.Physics Department, Faculty of ScienceKing Khalid UniversityAbhaSaudi Arabia

Personalised recommendations