Advertisement

Influence of microwave treatment on grinding and dissociation characteristics of vanadium titano-magnetite

  • Jun-peng Wang
  • Tao JiangEmail author
  • Ya-jing Liu
  • Xiang-xin Xue
Article

Abstract

The effect of microwave treatment on the grinding and dissociation characteristics of vanadium titano-magnetite (VTM) ore were investigated using scanning electron microscopy (SEM), nitrogen absorption measurements, particle size distribution measurements, X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopic analysis, and magnetic separation. SEM analysis showed that microfractures appeared in the microwave-treated VTM, which is attributed to the microwaves’ selective heating characteristic and the differential expansion between minerals and gangues. Nitrogen absorption showed that the microfractures were more pronounced when the microwave heating time was increased. Particle size distribution analysis showed that microwave treatment could improve the grindability of the VTM, thus increasing the weight percent of the fine-ground product. The increase in grindability was more significant with prolonged heating time. Moreover, the particle size distribution of the fine-ground product changed only slightly after the microwave treatment. XRD analysis showed that the crystallinity of the microwave-treated VTM increased with increasing microwave heating time. The magnetic separation tests revealed that the separation efficiency increased as a result of the intergranular fractures generated by microwave treatment. The Fe grade of the magnetic fraction of microwave-treated VTM was 1.72% higher than that of the raw ore. We concluded that the microwave treatment was beneficial, especially for the mineral processing characteristics.

Keywords

microwave treatment vanadium titano-magnetite grinding microstructure magnetic separation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (Nos. 51574082 and 51874077) and the Fundamental Research Funds for the Central University of China (Nos. N150202001 and N172507012).

References

  1. [1]
    A.R. Batchelor, D.A. Jones, S. Plint, and S.W. Kingman, Deriving the ideal ore texture for microwave treatment of metalliferous ores, Miner. Eng., 84(2015), p. 116.CrossRefGoogle Scholar
  2. [2]
    A. Somani, T.K. Nandi, S.K. Pal, and A.K. Majumder, Pre-treatment of rocks prior to comminution-A critical review of present practices, Int. J. Min. Sci. Technol., 27(2017), No. 2, p. 339.CrossRefGoogle Scholar
  3. [3]
    P. Hartlieb, M. Toifl, F. Kuchar, R. Meisels, and T. Antretter, Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution, Miner. Eng., 91(2016), p. 34.CrossRefGoogle Scholar
  4. [4]
    G.M. Lu, Y.H. Li, F. Hassani, and X.W. Zhang, The influence of microwave irradiation on thermal properties of main rock--forming minerals, Appl. Therm. Eng., 112(2017), p. 1523.CrossRefGoogle Scholar
  5. [5]
    W. Zhao, J. Chen, X.D. Chang, S.H. Guo, C. Srinivasakannan, G. Chen, and J.H. Peng, Effect of microwave irradiation on selective heating behavior and magnetic separation characteristics of Panzhihua ilmenite, Appl. Surf. Sci., 300(2014), p. 171.CrossRefGoogle Scholar
  6. [6]
    M. Omran, T. Fabritius, A.M. Elmahdy, N.A. Abdel-Khalek, M. El-Aref, and A.E.H. Elmanawi, Effect of microwave pre-treatment on the magnetic properties of iron ore and its implications on magnetic separation, Sep. Purif. Technol., 136(2014), p. 223.CrossRefGoogle Scholar
  7. [7]
    T. Jiang, Q.Y. Zhang, Y.J. Liu, X.X. Xue, and P.N. Duan, Influence of microwave irradiation on boron concentrate activation with an emphasis on surface properties, Appl. Surf. Sci., 385(2016), p. 88.CrossRefGoogle Scholar
  8. [8]
    V. Rizmanoski, The effect of microwave pretreatment on impact breakage of copper ore, Miner. Eng., 24(2011), No. 14, p. 1609.CrossRefGoogle Scholar
  9. [9]
    A.N. Didenko, B.V. Zverev, and A.V. Prokopenko, Microwave fracturing and grinding of solid rocks by example of kimberlite, Dokl. Phys., 50(2005), No. 7, p. 349.CrossRefGoogle Scholar
  10. [10]
    Y.M. Yang, J.Z. Liu, X. He, Z.H. Wang, J.H. Zhou, and K.F. Cen, Mechanism underlying the effect of conventional drying on the grinding characteristics of Ximeng lignite, Korean J. Chem. Eng., 34(2017), No. 4, p. 1250.CrossRefGoogle Scholar
  11. [11]
    A. Mehdilo and M. Irannajad, Comparison of microwave irradiation and oxidation roasting as pretreatment methods for modification of ilmenite physicochemical properties, J. Ind. Eng. Chem., 33(2016), p. 59.CrossRefGoogle Scholar
  12. [12]
    S. Samanli, A comparison of the results obtained from grinding in a stirred media mill lignite coal samples treated with microwave and untreated samples, Fuel, 90(2011), No. 2, p. 659.CrossRefGoogle Scholar
  13. [13]
    B.K. Sahoo, S. De, and B.C. Meikap, Improvement of grinding characteristics of Indian coal by microwave pre-treatment, Fuel Process. Technol., 92(2011), No. 10, p. 1920.CrossRefGoogle Scholar
  14. [14]
    J.W. Walkiewicz, G. Kazonich, and S.L. McGill, Microwave heating characteristics of selected minerals and compounds, Miner. Metall. Process., 5(1988), No. 1, p. 39.Google Scholar
  15. [15]
    Z.Y. Ma, H.Y. Yang, S.T. Huang, Y. Lü, and L. Xiong, Ultra fast microwave-assisted leaching for the recovery of copper and tellurium from copper anode slime, Int. J. Miner. Metall. Mater., 22(2015), No. 6, p. 582.CrossRefGoogle Scholar
  16. [16]
    C.B. Zhong, C.L. Xu, R.L. Lyu, Z.Y. Zhang, X.Y. Wu, and R.A. Chi, Enhancing mineral liberation of a Canadian rare earth are with microwave pretreatment, J. Rare Earths, 36(2018), No. 2, p. 215.CrossRefGoogle Scholar
  17. [17]
    S.S. Liu, Y.F. Guo, G.Z. Qiu, T. Jiang, and F. Chen, Solid- state reduction kinetics and mechanism of pre-oxidized vanadium-titanium magnetite concentrate, Trans. Nonferrous Met. Soc. China, 24(2014), No. 10, p. 3372.CrossRefGoogle Scholar
  18. [18]
    S.W. Kingman, K. Jackson, S.M. Bradshaw, N.A. Rowson, and R. Greenwood, An investigation into the influence of microwave treatment on mineral ore comminution, Powder Technol., 146(2004), No. 3, p. 176.CrossRefGoogle Scholar
  19. [19]
    K.E. Waters, N.A. Rowson, R.W. Greenwood, and A.J. Williams, Characterising the effect of microwave radiation on the magnetic properties of pyrite, Sep. Purif. Technol., 56(2007), No. 1, p. 9.CrossRefGoogle Scholar
  20. [20]
    G. Chen, J. Chen, S.H. Guo, J. Li, C. Srinivasakannan, and J.H. Peng, Dissociation behavior and structural of ilmenite ore by microwave irradiation, Appl. Surf. Sci., 258(2012), No. 10, p. 4826.CrossRefGoogle Scholar
  21. [21]
    S.H. Guo, G. Chen, J.H. Peng, J. Chen, D.B. Li, and L.J. Liu, Microwave assisted grinding of ilmenite ore, Trans. Nonferrous Met. Soc. China, 21(2011), No. 9, p. 2122.CrossRefGoogle Scholar
  22. [22]
    B.K. Sahoo, S. De, and B.C. Meikap, An investigation into the influence of microwave energy on iron ore-water slurry rheology, J. Ind. Eng. Chem., 25(2015), p. 122.CrossRefGoogle Scholar
  23. [23]
    H. Park, J.Y. Park, G.H. Kim, and I. Sohn, Effect of TiO2 on the viscosity and slag structure in blast furnace type slags, Steel Res. Int., 83(2012), No. 2, p. 150.CrossRefGoogle Scholar
  24. [24]
    P. Kumar, B.K. Sahoo, S. De, D.D. Kar, S. Chakraborty, and B.C. Meikap, Iron ore grindability improvement by microwave pre-treatment, J. Ind. Eng. Chem., 16(2010), No. 5, p. 805.CrossRefGoogle Scholar

Copyright information

© University of Science and Technology Beijing and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Jun-peng Wang
    • 1
  • Tao Jiang
    • 1
    • 2
    Email author
  • Ya-jing Liu
    • 1
  • Xiang-xin Xue
    • 1
    • 2
  1. 1.School of MetallurgyNortheastern UniversityShenyangChina
  2. 2.Key Laboratory of Liaoning Province for Recycling Science of Metallurgical ResourcesShenyangChina

Personalised recommendations