Evolution of microstructure and texture during cold rolling and high-temperature annealing in Ni–5 at% W substrate for coated conductor
- 8 Downloads
The evolution of microstructure and texture at four strain levels was investigated in Ni–5 at% W alloy by means of electron backscatter diffraction (EBSD) technique. The deformation microstructure evolves gradually from microbands (MBs) to typical lamellar structures with strain increasing in cold-rolled materials, while only lamellar structures in heavily cold-rolled materials. Subsequently, quantitative analysis of microstructure and texture was performed. It indicates that the texture is a typical pure metal deformation texture, but a few cube and rolling direction (RD)-rotated cube orientations also can be observed in the deformed samples. The use of high-temperature annealing enables an area fraction of cube orientation > 95% to be obtained for high strained substrate. In addition, it is worth noting that the point-to-point misorientation inside the band with various orientations is found to keep quite low. But the point-to-origin misorientation over the same distance is dependent on strain and orientation type in the band. The cube-oriented regions were characterized by a high accumulated orientation gradient, close to 28°, compared to the non-cube-oriented regions. This means that the accumulated orientation gradient only occurs in the cube band with the reduction of 98%, which partly explains the formation of strong cube texture after high-temperature annealing.
KeywordsCold rolling Microstructure Texture Orientation relationship
This project was financially supported by the National Natural Science Foundation of China (No. 51171215).
- Goyal A, Norton DP, Christen DK, Specht ED, Paranthaman M, Kroeger DM, Budai JD, He Q, List FA, Feenstra R, Kerchner HR, Lee DF, Hatfield E, Martin PM, Mathis J, Park C. Epitaxial superconductors on rolling-assisted biaxially-texture substrates (RABiTS): a route towards high critical current density wire. Appl Supercond. 1996;4(10):403.CrossRefGoogle Scholar
- Goyal A, Norton DP, Budai JD, Paranthaman M, Specht ED, Kroeger DM, Christen DK, He Q, Saffian B, List FA, Lee DF, Martin PM, Klabunde CE, Hartfield E, Sikka VK. High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals. Appl Phys Lett. 1996;69(12):1795.CrossRefGoogle Scholar
- Norton DP, Goyal A, Budai JD, Christen DK, Kroeger DM, Specht ED, He Q, Saffian B, Paranthaman M, Klabunde CE, Lee DF, Sales BC, List FA. Epitaxial YBa2Cu3O7 on baxially textured nickel (001): an approach to superconducting tapes with high critical current density. Science. 1996;274(5288):755.CrossRefGoogle Scholar
- Hui T, Suo HL, Qiu HQ, Liu M, Ma L, Wang LM, Yuan DM, Wang YX. Investigation of cold rolling texture and recrystallization texture in NiW substrates. Rare Met Mater Eng. 2011;40(3):329.Google Scholar
- Li LF, Chen XP, Sun HF, Li XG. Effect of strain on grain boundary character distribution in Ni–5 at% W alloy. Trans Mater Heat Treat. 2015;36(6):26.Google Scholar
- Liu ZY, Li WF, Zhang N, Yang F, Song GL, An YP, Zhang H, Chang FG. Fabrication and properties of non-magnetic strong cube textured Cu60Ni40 alloy substrate. Rare Met Mater Eng. 2015;44(9):2295.Google Scholar