High damping capacity of Ni–Mn–Ga–Cu microwires prepared by melt-extraction technique
- 93 Downloads
Abstract
Ni–Mn–Ga–Cu microwires, with diameter of 20–80 μm, length of 30–150 mm and fined columnar grains, were produced by melt-extraction technique. The damping capacity of the extracted microwires was investigated by stretching a microwire under a tensile stress using dynamic mechanical analyzer. The damping capacity of the martensite and austenite phases shows a weak frequency dependence but a strong strain amplitude dependence. The damping capacity (Tanδ) of the martensite and austenite phases reaches 0.08 and 0.04, respectively, under strain amplitude of 0.5% and frequency of 1 Hz. The high damping capacity of the martensite phase is related to the high mobility of martensite twin boudaries, while that of austenite phase to the motion of dislocations. The ferromagnetic Ni–Mn–Ga–Cu microwires, with high ductility and damping capacity, may act as promising materials for microscale devices, systems and composite fillers for passive dissipation of undesired vibrations and noises.
Keywords
Shape memory alloys Phase transformation Damping capacity Ni–Mn–Ga–Cu alloyNotes
Acknowledgements
This work was financially supported by the Ministry of Science and Technology Bureau of Harbin (No.2011RFQXG001).
References
- [1]Araki Y, Endo T, Omori T, Sutou T, Koetaka Y, Kainuma T, Ishida K. Potential of superelastic Cu–Al–Mn alloy bars for seismic applications. Earthq Eng Struct Dyn. 2011;40(1):107.CrossRefGoogle Scholar
- [2]Humbeeck JV. Damping capacity of thermoelastic martensite in shape memory alloys. J Alloy Compd. 2003;355(1):58.CrossRefGoogle Scholar
- [3]Juan JS, Nó ML, Schuh CA. Nanoscale shape-memory alloys for ultrahigh mechanical damping. Nat Nanotechnol. 2009;4(7):415.CrossRefGoogle Scholar
- [4]Humbeeck JV. Damping properties of shape memory alloys during phase transformation. J Phys IV. 1996;6(8):C8–371.Google Scholar
- [5]Fan G, Zhou Y, Otsuka K, Ren X, Nakamura K, Ohba T, Suzuki T, Yoshida I, Yin F. Effects of frequency, composition, hydrogen and twin boundary density on the internal friction of Ti50Ni50−xCux shape memory alloys. Acta Mater. 2006;54(19):5221.CrossRefGoogle Scholar
- [6]Feuchtwanger J, Michael S, Juang J, Bono D, O’Handley RC, Allen SM, Jenkins C, Goldie J, Berkowitz A. Energy absorption in Ni–Mn–Ga-polymer composites. J Appl Phys. 2003;93(10):8528.Google Scholar
- [7]Chen Y, Schuh CA. Size effects in shape memory alloy microwires. Acta Mater. 2011;59(2):537.Google Scholar
- [8]Predki W, Klönne M, Knopik A. Cyclic torsional loading of pseudoelastic NiTi shape memory alloys: damping and fatigue failure. Mater Sci Eng A. 2006;417(1):182.CrossRefGoogle Scholar
- [9]Sutou Y, Omori T, Koeda N, Kainuma R, Ishida K. Effects of grain size and texture on damping properties of Cu–Al–Mn-based shape memory alloys. Mater Sci Eng A. 2006;438–440(24):743.CrossRefGoogle Scholar
- [10]Tanaka Y, Himuro Y, Kainuma R, Sutou Y, Omori T, Ishida K. Ferrous polycrystalline shape-memory alloy showing huge superelasticity. Science. 2010;327(5972):1488.CrossRefGoogle Scholar
- [11]He Y, Yin H, Zhou R, Sun Q. Ambient effect on damping peak of NiTi shape memory alloy. Mater Lett. 2010;64(13):1483.CrossRefGoogle Scholar
- [12]Piedboeuf MC, Gauvin R, Thomas M. Damping behaviour of shape memory alloys: strain amplitude, frequency and temperature effects. J Sound Vib. 1998;214(5):885.CrossRefGoogle Scholar
- [13]Ullakko K, Huang JK, Kantner C, O’Handley RC, Kokorin VV. Large magnetic-field-induced strains in Ni2MnGa single crystals. Appl Phys Lett. 1996;69(13):1966.Google Scholar
- [14]Chang SH, Wu SK. Low-frequency damping properties of near-stoichiometric Ni2MnGa shape memory alloys under isothermal conditions. Scr Mater. 2008;59(10):1039.CrossRefGoogle Scholar
- [15]Wang WH, Liu GD, Wu GH. Magnetically controlled high damping in ferromagnetic Ni52Mn24Ga24 single crystal. Appl Phys Lett. 2006;89(10):101911.CrossRefGoogle Scholar
- [16]Zeng M, Or SW, Chan HLW. Ultrahigh anisotropic damping in ferromagnetic shape memory Ni–Mn–Ga single crystal. J Alloys Compd. 2010;493(1–2):565.CrossRefGoogle Scholar
- [17]Yoshida I, Monma D, Iino K, Ono T, Otsuka K, Asai M. Internal friction of Ti–Ni–Cu ternary shape memory alloys. Mater Sci Eng A. 2004;370(1):444.CrossRefGoogle Scholar
- [18]Yoshida I, Ono T, Asai M. Internal friction of Ti-Ni alloys. J Alloys Compd. 2000;310(1–2):339.Google Scholar
- [19]Chang SH. Low frequency damping properties of a NiMnTi shape memory alloy. Mater Lett. 2011;65(1):134.CrossRefGoogle Scholar
- [20]Wang Q, Han F, Wu J, Hao G. Damping behavior of porous CuAlMn shape memory alloy. Mater Lett. 2007;61(11–12):2598.CrossRefGoogle Scholar
- [21]Chang SH. Influence of chemical composition on the damping characteristics of Cu–Al–Ni shape memory alloys. Mater Chem Phys. 2011;125(3):358.CrossRefGoogle Scholar
- [22]Gao L, Dong GF, Gao ZY, Cai W. Effect of Dy addition on mechanical and magnetic properties of Mn-rich Ni–Mn–Ga ferromagnetic shape memory alloys. J Alloys Compd. 2012;520:281.Google Scholar
- [23]Gao ZY, Dong GF, Cai W, Sui JH, Feng Y, Li XH. Martensitic transformation and mechanical properties in an aged Ni–Mn–Ga–Ti ferromagnetic shape memory alloy. J Alloys Compd. 2009;481(1–2):44.CrossRefGoogle Scholar
- [24]Liu AL, Xu JW, Gao L, Zheng Y. Effect of Y addition on mechanical properties of Ni50Mn28Ga22 magnetic shape memory alloy. Adv Mater Res. 2011;299–300(1):645.Google Scholar
- [25]Wang HB, Chen F, Gao ZY, Cai W, Zhao LC. Effect of Fe content on fracture behavior of Ni–Mn–Fe–Ga ferromagnetic shape memory alloys. Mater Sci Eng A. 2006;438–440(1):990.CrossRefGoogle Scholar
- [26]Wang J, Bai H, Jiang C, Li Y, Xu H. A highly plastic Ni50Mn25Cu18Ga7 high-temperature shape memory alloy. Mater Sci Eng A. 2010;527(7–8):1975.CrossRefGoogle Scholar
- [27]Wang J, Jiang C. A single-phase wide-hysteresis shape memory alloy Ni50Mn25Ga17Cu8. Scr Mater. 2010;62(5):298.CrossRefGoogle Scholar
- [28]Li Y, Wang J, Jiang C. Study of Ni–Mn–Ga–Cu as single-phase wide-hysteresis shape memory alloys. Mater Sci Eng A. 2011;528(22–23):6907.CrossRefGoogle Scholar
- [29]Wang JM, Wang HF, Jiang C. Microstructure and mechanical properties of a Ni30Cu20Mn41.5Ga8.5 dual-phase shape memory alloy. Mater Sci Eng A. 2013;578(8):256.CrossRefGoogle Scholar
- [30]Li PP, Wang JM, Jiang CB, Xu HB. Magnetic field-induced inverse martensitic transformation in NiMnGaCu alloys. J Phys D Appl Phys. 2011;44(28):285002.CrossRefGoogle Scholar
- [31]Jiang CB, Wang JM, Li PP, Jia A, Xu HB. Search for transformation from paramagnetic martensite to ferromagnetic austenite: NiMnGaCu alloys. Appl Phys Lett. 2009;95(1):12501.CrossRefGoogle Scholar
- [32]Qian MF, Zhang XX, Wei LS, Martin PG, Sun JF, Geng L, Scott TB, Panina LV, Peng HX. Microstructural evolution of Ni–Mn–Ga microwires during the melt-extraction process. J Alloy Compd. 2016;660(6):244.CrossRefGoogle Scholar
- [33]Qian MF, Zhang XX, Witherspoon C, Sun JF, Müllner P. Superelasticity and shape memory effects in polycrystalline Ni–Mn–Ga microwires. J Alloy Compd. 2013;577(1):S296.CrossRefGoogle Scholar
- [34]Chen Y, Jiang HC, Liu SW, Rong LJ, Zhao XQ. Damping capacity of TiNi-based shape memory alloys. J Alloys Compd. 2007;482(1–2):151.CrossRefGoogle Scholar
- [35]Glock S, Zhang XX, Kucza NJ, Müllner P, Michaud V. Structural, physical and damping properties of melt-spun Ni–Mn–Ga wire-epoxy composites. Compos Part A. 2014;63(18):68.CrossRefGoogle Scholar
- [36]Qian MF, Zhang XX, Wei LS, Geng L, Peng HX. Structural, magnetic and mechanical properties of oligocrystalline Ni–Mn–Ga shape memory microwires. Mater Today Proc. 2015;2:S577.CrossRefGoogle Scholar