Advertisement

Rare Metals

, Volume 38, Issue 3, pp 227–232 | Cite as

Low-cycle fatigue behavior of a directionally solidified Ni-based superalloy subjected to gas hot corrosion pre-exposure

  • Hong-Yu Qi
  • Ji-Shen Yang
  • Xiao-Guang YangEmail author
  • Shao-Lin Li
Article

Abstract

The influence of gas high-temperature hot corrosion (HTHC) pre-exposure on low-cycle fatigue (LCF) behavior was characterized for the directionally solidified (DS) Ni-based superalloy DZ125. Fatigue tests were carried out at 850 °C in the pre-exposed and unexposed specimens for 2, 15 and 25 h. Experimental results show that the porous corrosion scale and γ′-depleted layer formed in gas hot corrosion condition alter the crack initiation mechanisms of the superalloy. Fatigue cracks of the pre-exposed specimens originate from multiple surface locations where spalling of the corrosion products occur, while nucleation of unexposed specimen begins in the defects close to the surface. There is a significant reduction in LCF behavior for pre-exposed specimens in comparison with unexposed specimens.

Keywords

Low-cycle fatigue Hot corrosion Pre-exposure Burner rig Ni-based superalloy 

Notes

Acknowledgements

This study was financially supported by the National Natural Science Foundation of China (No. 51571010) and the National Basic Research Program of China (No. 2015CB057400).

References

  1. [1]
    Pollock TM, Tin S. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. J Propul Power. 2006;22(2):361.CrossRefGoogle Scholar
  2. [2]
    Sahm PR, Speidel MO, Woodford DA. High-temperature materials in gas turbines. J Eng Mater Technol. 1975;1:94.CrossRefGoogle Scholar
  3. [3]
    Eliaz N, Shemesh G, Latanision RM. Hot corrosion in gas turbine components. Eng Fail Anal. 2002;9(1):31.CrossRefGoogle Scholar
  4. [4]
    Rapp RA. Hot corrosion of materials. Pure Appl Chem. 1990;62(1):113.CrossRefGoogle Scholar
  5. [5]
    Carter TJ. Common failures in gas turbine blades. Eng Fail Anal. 2005;12(2):237.CrossRefGoogle Scholar
  6. [6]
    Guo J, Ranucci D, Picco E. Low cycle fatigue behaviour of cast nickel-base superalloy IN738LC in air and in hot corrosive environments. Mater Sci Eng. 1983;58(1):127.CrossRefGoogle Scholar
  7. [7]
    Sahu JK, Gupta RK, Swaminathan J, Pauloseb N, Mannanb SL. Influence of hot corrosion on low cycle fatigue behavior of nickel base superalloy SU 263. Int J Fatigue. 2013;51(2):68.CrossRefGoogle Scholar
  8. [8]
    Mahobia GS, Sudhakar RG, Antony A, Chattopadhyay K, NC, Santhi Srinivas NC, Singh Vakil. Effect of salt coatings on low cycle fatigue behavior of nickel-base superalloy GTM-SU-718. Proc Eng. 2013;55:830.CrossRefGoogle Scholar
  9. [9]
    Mahobia GS, Paulose N, Mannan SL, Sudhakara RG, Chattopadhyaya K, Santhi Srinivasa NC, Singha Vakil. Effect of hot corrosion on low cycle fatigue behavior of superalloy IN718. Int J Fatigue. 2014;59(2):272.CrossRefGoogle Scholar
  10. [10]
    Guo J, Ranucci D, Picco E, Strocchi PM. Effect of environment on the low cycle fatigue behaviour of cast nickel-base superalloy IN738LC. Int J Fatigue. 1984;6(2):95.CrossRefGoogle Scholar
  11. [11]
    Saunders S, Nicholls J. Hot salt corrosion test procedures and coating evaluation. Thin Solid Films. 1984;119(3):247.CrossRefGoogle Scholar
  12. [12]
    Ma J, Jiang SM, Gong J, Chao S. Behaviour and mechanisms of alkali-sulphate-induced hot corrosion on composite coatings at 900 °C. Corros Sci. 2012;58:251.CrossRefGoogle Scholar
  13. [13]
    Qiao Y, Guo X, Li X. Hot corrosion behavior of silicide coating on an Nb–Ti–Si based ultrahigh temperature alloy. Corros Sci. 2014;91:75.CrossRefGoogle Scholar
  14. [14]
    Zheng L, Zhang MC, Dong JX. Hot corrosion behavior of powder metallurgy Rene95 nickel-based superalloy in molten NaCl–Na2SO4 salts. Mater Des. 2011;32(4):1981.CrossRefGoogle Scholar
  15. [15]
    Kosieniak E, Biesiada K, Kaczorowski J, Innocenti M. Corrosion failures in gas turbine hot components. J Fail Anal Prev. 2012;12(3):330.CrossRefGoogle Scholar
  16. [16]
    Yang XG, Dong CL, Shi DQ, Zhang L. Experimental investigation on both low cycle fatigue and fracture behavior of DZ125 base metal and the brazed joint at elevated temperature. Mater Sci Eng A. 2011;528(22):7005.CrossRefGoogle Scholar
  17. [17]
    Gordon AP, Neu RW, Well DL. Effect of pre-exposure on crack initiation life of a directionally solidified Ni-base superalloy. Int J Fatigue. 2009;31(2):393.CrossRefGoogle Scholar
  18. [18]
    Antolovich SD, Domas P, Strudel JL. Low cycle fatigue of René 80 as affected by prior exposure. Metall Trans A. 1979;10(12):1859.CrossRefGoogle Scholar
  19. [19]
    Nazmy M, Denk J, Baumann R, Künzler A. Environmental effects on tensile and low cycle fatigue behavior of single crystal nickel base superalloys. Scripta Mater. 2003;48(5):519.CrossRefGoogle Scholar
  20. [20]
    Barbosa C, Nascimento JL, Caminha IMV, Abud IC. Microstructural aspects of the failure analysis of nickel base superalloys components. Eng Fail Anal. 2005;12(3):348.CrossRefGoogle Scholar

Copyright information

© The Nonferrous Metals Society of China and Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  1. 1.School of Energy and Power EngineeringBeihang UniversityBeijingChina
  2. 2.Collaborative Innovation Center of Advanced Aero-EngineBeijingChina

Personalised recommendations