Advertisement

Reduction of Burr in Rolling Process Through Shear Mechanism Analysis

  • Hyungjin KimEmail author
Regular Paper
  • 20 Downloads

Abstract

This study analyzes the burrs and defects generated on a shear surface during the billet shear process and the effects of the shearing conditions such as the blade shape, knife gap, align between top and bottom knife and angle. We believe that our study makes a significant contribution to the literature because it provides a means of overcoming the limitations of current methods used to reduce defects. Further, we believe that this paper will be of interest to the readership of your journal because of its focus on improving the current shearing process to obtain better quality products. The objective of this study is to develop an reduction of burr in rolling workpiece. This paper presents the method to evaluate the kind of blade types. In addition, the results of a field test in a real, large factory are introduced in this paper.

Keywords

Burr Knife Billet Rolling Shear Defect 

Notes

References

  1. 1.
    Bendzak. G., & Cox, J. (1989). Induction heating of billets in direct rolling. In Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy (pp. 95–106).Google Scholar
  2. 2.
    Brayshaw, E. E. (1958). Roll and rolling. Blaw Knox Co Ill (pp. 102/17).Google Scholar
  3. 3.
    Collin, B. (1969). Roll pass design for finish rolling of wire and bar. Stockholm: Royal Institute of Technology, Internal Report of Dep. of Metal Forming.Google Scholar
  4. 4.
    Palani, S., Suresh, K., Thanesh, A., & Muthu, K. (2016). Design and development of billet sawing machine for improving productivity. Indian Journal of Science and Technology.  https://doi.org/10.17485/ijst/2016/v9i1/85778.CrossRefGoogle Scholar
  5. 5.
    Walzdrahtfehler. (1973). Wire rod defects. Dusseldorf: Verlag Stahleisen GmbH.Google Scholar
  6. 6.
    Visvanathan, R., Sreenarayanan, V., & Swaminathan, K. R. (1996). Effect of knife angle and velocity on the energy required to cut cassava tubers. Journal of Agricultural Engineering Research,64(2), 99–102.CrossRefGoogle Scholar
  7. 7.
    Wuppermann, C. D., & Koster, F. (1975). Verfahrensweg zur Herstellung von Stabstahl und Walzdraht. Dusseldorf: Verlag Stahleisen GmbH.Google Scholar
  8. 8.
    Breitling, J., Chernauskas, V., Taupin, E., & Altan, T. (1997). Precision shearing of billets—Special equipment and process simulation. Journal of Materials Processing Technology,71(1), 119–125.CrossRefGoogle Scholar
  9. 9.
    Cardone, M., Putz, M., Schmidt, G., Dix, M., Friedrich, J., & Stockmann, E. (2016). Granulation of extruded plastic wires-influence of tool geometry and process parameters. Procedia CIRP,46, 135–138.CrossRefGoogle Scholar
  10. 10.
    Taupin, E., Breitling, J., Wu, W. T., & Altan, T. (1996). Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments. Journal of Materials Processing Technology,59(1–2), 68–78.CrossRefGoogle Scholar
  11. 11.
    Ghosh, S., Li, M., & Khadke, A. (2005). 3D modeling of shear-slitting process for aluminum alloys. Journal of Materials Processing Technology,167(1), 91–102.CrossRefGoogle Scholar
  12. 12.
    Beagley, T. M. (1976). Severe wear of rolling/sliding contacts. Wear,36(3), 317–335.CrossRefGoogle Scholar
  13. 13.
    Organ, A. J., & Mellor, P. B. (1967). Some factors affecting the quality of cropped billets. International Journal of Machine Tool Design and Research,7(4), 369–389.CrossRefGoogle Scholar
  14. 14.
    Huang, Q. X., Wang, J. M., Yang, J. W., Ying, L. I., & Li, J. B. (2007). Mechanical properties of new type negative offset structure during shearing process of heavy steel plate. Journal of Iron and Steel Research International,14(5), 31–35.CrossRefGoogle Scholar
  15. 15.
    Li, Y. G., Quan, Y. E., Fei, F. A., Ye, B. A., & Huang, Q. X. (2012). Finite element method analysis of effect of blade clearance on plate shearing process. Journal of Iron and Steel Research International,19(10), 26–29.CrossRefGoogle Scholar
  16. 16.
    Hammarsten, Å. (1987). Simulation of roller guide wear in a high temperature test rig. Wear,120(1), 81–99.CrossRefGoogle Scholar
  17. 17.
    Ma, L. F., Huang, Q. X., Huang, Z. Q., Chu, Z. B., & Tian, Y. Q. (2012). Establishment of optimal blade clearance of stainless steel rolling-cut shear and test of shearing force parameters. Journal of Iron and Steel Research International,19(9), 52–61.CrossRefGoogle Scholar
  18. 18.
    Eriksson, C. (2004). Surface cracks in wire rod rolling. Steel Research International, Metal Forming - Hot Rolling,75(12), 818–828.CrossRefGoogle Scholar
  19. 19.
    Hartnett, M. J. (1979). The analysis of contact stresses in rolling element bearings. Journal of Lubrication Tech,101(1), 105–109.CrossRefGoogle Scholar
  20. 20.
    Torres, H., Varga, M., Adam, K., & Badisch, E. (2013). Wear phenomena in high temperature sheet shearing blades. Wear,306(1–2), 10–16.CrossRefGoogle Scholar
  21. 21.
    Jeong, H. (2014). A study on the shearing process and the burr formation of Zircaloy-4 sheet by using GTN model. International Journal of Precision Engineering and Manufacturing,15(10), 2167–2175.CrossRefGoogle Scholar
  22. 22.
    Song, S.-H. (2016). FEM investigation on thermal effects on force in highspeed blanking of mild steel. International Journal of Precision Engineering and Manufacturing,17(5), 631–635.CrossRefGoogle Scholar
  23. 23.
    Song, S.-H. (2015). FEM analysis on the influence of rounded tool edge on micro-blanking of thin foil with negative clearance. International Journal of Precision Engineering and Manufacturing,16(6), 1101–1105.CrossRefGoogle Scholar
  24. 24.
    Davoudinejad, A. (2017). Influence of the worn tool affected by built-up edge (BUE) on micro end-milling process performance: A 3D finite element modeling investigation. International Journal of Precision Engineering and Manufacturing,18(10), 1321–1332.CrossRefGoogle Scholar
  25. 25.
    Dasgupta, D. K. (1989). Force and energy calculations in metal shearing using inclined knife profile. Journal of Material Shaping Technology, 6(3), 165–169.CrossRefGoogle Scholar

Copyright information

© Korean Society for Precision Engineering 2020

Authors and Affiliations

  1. 1.Graduate Institute of Ferrous TechnologyPohang University of Science and TechnologyPohangRepublic of Korea

Personalised recommendations