Advertisement

Metals and Materials International

, Volume 25, Issue 5, pp 1326–1340 | Cite as

Characterization of the Mechanical Properties of a High-Strength Laminated Vibration Damping Steel Sheet and Their Application to Formability Prediction

  • Hyeonil Park
  • Se-Jong Kim
  • Jinwoo Lee
  • Ji Hoon Kim
  • Daeyong KimEmail author
Article
  • 70 Downloads

Abstract

In this study, the mechanical properties of a high-strength laminated vibration damping steel sheet (LVDSS) with stretch-dominated deformation behavior were characterized and successfully applied to formability prediction. The high-strength LVDSS was fabricated with dual-phase 590 steel sheets as outer skins and polymeric adhesive layer as a core via roll bonding. The uniaxial and biaxial mechanical behaviors were evaluated by performing uniaxial tension and in-plane biaxial tension tests, respectively, while the forming limit was investigated by conducting punched dome tests. Then, based on the experimental data, the mechanical properties of the LVDSS were characterized, viz., the hardening curve, yield function, and forming limit curve. As an example of LVDSS application, a square cup drawing test was conducted and a dashboard prototype was fabricated using an LVDSS, and the deformation and failure behaviors were successfully predicted via a finite element simulation performed by inputting the characterized mechanical properties.

Keywords

High-strength laminated vibration damping steel sheet DP590 steel sheet Adhesive layer Formability prediction 

Notes

Acknowledgements

This study was financially supported by the Fundamental Research Program of Korea Institute of Materials Science (KIMS, PNK6000) and Industrial Technology Innovation program (No. 10063579), funded by the Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea.

References

  1. 1.
    E.M. Kerwin Jr., Damping of flexural waves by a constrained viscoelastic layer. J. Acoust. Soc. Am. 31, 952–962 (1959)CrossRefGoogle Scholar
  2. 2.
    L.H. Gould, B. Shore, Vibration damping in sheet metal structures. Patent US3071217A (1963)Google Scholar
  3. 3.
    J. Killian, Y. Lu, A finite element modeling approximation for damping material used in constrained damped structures. J. Sound Vib. 97, 352–354 (1984)CrossRefGoogle Scholar
  4. 4.
    M. Shinozaki, Y. Matsumoto, Y. Aoyagi, K. Kojima, Vibration damping composite laminate. Patent EP0167455A3 (1987)Google Scholar
  5. 5.
    E.E. Ungar, D.H. Sturz, C. Hal Amick, Vibration control design of high technology facilities. Sound Vib. 24, 20–27 (1990)Google Scholar
  6. 6.
    Y.S. Chen, T.J. Hsu, S.I. Chen, Vibration damping characteristics of laminated steel sheet. Sound Vib. 22, 653–656 (1991)Google Scholar
  7. 7.
    E. Hiroshi, E. Miizuo, Z. Yoshimasa, The development of vibration damping steel sheet for automotive use. SAE Tech. Pap. 890708, 11 (1989).  https://doi.org/10.4271/890708 Google Scholar
  8. 8.
    S. Kitamura, T. Okumura, Y. Tadokoro, H. Toya, Vibration-damping material. Patent CA1265426A (1989)Google Scholar
  9. 9.
    S. Ichihara, K. Yano, T. Niwa, S. Ishiwa, Vibration damping body and method for fabricating same. Patent US5489180A (1996)Google Scholar
  10. 10.
    A. Atrian, H. Panahi, Experimental and finite element investigation on wrinkling behaviour in deep drawing process of Al3105/Polypropylene/Steel304 sandwich sheets. Procedia Manuf. 15, 984–991 (2018)CrossRefGoogle Scholar
  11. 11.
    H.S. Cheng, J. Cao, H. Yao, S.D. Liu, B. Kinsey, Wrinkling behavior of laminated steel sheets. J. Mater. Process. Technol. 151, 133–140 (2004)CrossRefGoogle Scholar
  12. 12.
    M. Takiguchi, F. Yoshida, Plastic bending of adhesive-bonded sheet metals. J. Mater. Process. Technol. 113, 743–748 (2001)CrossRefGoogle Scholar
  13. 13.
    E. Corona, T. Eisenhour, Wiping die bending of laminated steel. Int. J. Mech. Sci. 49, 392–403 (2007)CrossRefGoogle Scholar
  14. 14.
    Y. Wang, J. Chen, B.T. Tang, Finite element analysis for delamination of laminated vibration damping steel sheet. Trans. Nonferrous Met. Soc. China 17, 1–6 (2007)CrossRefGoogle Scholar
  15. 15.
    B. Engel, J. Buhl, Metal forming of vibration-damping composite sheets. AIP Conf. Proc. 1383, 733–741 (2011)CrossRefGoogle Scholar
  16. 16.
    J.-K. Kim, T. Yu, Forming and failure behaviour of coated, laminated and sandwiched sheet metals: a review. J. Mater. Process. Technol. 63, 33–42 (1997)CrossRefGoogle Scholar
  17. 17.
    K.S. Shin, K.J. Kim, S. Choi, M.H. Rhee, Mechanical properties of aluminum/polypropylene/aluminum sandwich sheets. Met. Mater. Int. 5, 613–618 (1999)CrossRefGoogle Scholar
  18. 18.
    K.J. Kim, D. Kim, S.H. Choi, K. Chung, K.S. Shin, F. Barlat, K.H. Oh, J.R. Youn, Formability of AA5182/polypropylene/AA5182 sandwich sheets. J. Mater. Process. Technol. 139, 1–7 (2003)CrossRefGoogle Scholar
  19. 19.
    J. Liu, W. Liu, W. Xue, Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheets. Mater. Des. 46, 112–120 (2013)CrossRefGoogle Scholar
  20. 20.
    A. Kami, B. Mollaei Dariani, D.S. Comsa, D. Banabic, A. Sadough Vanini, M. Liewald, An experimental study on the formability of a vibration damping sandwich sheet (BONDAL). in Proceedings of the Romanian Academy—Series A: Mathematics, Physics, Technical Sciences, Information Science, vol. 18, pp. 281–290 (2017)Google Scholar
  21. 21.
    T. Kuwabara, S. Ikeda, K. Kuroda, Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension. J. Mater. Process. Technol. 80–81, 517–523 (1998)CrossRefGoogle Scholar
  22. 22.
    K. Nakazima, T. Kikuma, K. Hasuka, Study on the formability of steel sheets. Yamata Technical Report, No. vol. 264, pp. 8517–8530 (1968)Google Scholar
  23. 23.
    International Organization for Standardization ISO12004-2, Metallic materials-Sheet and strip-Determination of forming limit curves Part 2: determination of forming limit curves in laboratory, 1–32 (2008)Google Scholar
  24. 24.
    F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.H. Choi, E. Chu, Plane stress yield function for aluminum alloy sheets—Part 1: theory. Int. J. Plast. 19, 1297–1319 (2003)CrossRefGoogle Scholar
  25. 25.
    H. Swift, Plastic instability under plane stress. J. Mech. Phys. Solids 1, 1–18 (1952)CrossRefGoogle Scholar
  26. 26.
    E. Voce, The relationship between stress and strain for homogeneous deformation. J. Inst. Met. 74, 537–562 (1948)Google Scholar
  27. 27.
    Livermore Software Technology Corp. LS-Dyna, User’s Manual. (2016)Google Scholar
  28. 28.
    C. Kim, J. Lee, F. Barlat, M.-G. Lee, Frictional behaviors of a mild steel and a TRIP780 steel under a wide range of contact stress and sliding speed. J. Tribol. 136, 1–7 (2014)CrossRefGoogle Scholar

Copyright information

© The Korean Institute of Metals and Materials 2019

Authors and Affiliations

  1. 1.Materials Deformation DepartmentKorea Institute of Materials ScienceChangwonRepublic of Korea
  2. 2.Department of Mechanical EngineeringPusan National UniversityBusanRepublic of Korea

Personalised recommendations