Advertisement

Structural properties of unsaturated compacted loess for various sample moisture contents

  • Yan-zhou HaoEmail author
  • Tie-hang Wang
  • Juan-juan Wang
Original Paper
  • 59 Downloads

Abstract

This paper investigates the structural properties of compacted loess by focusing on the influence of structural changes incurred by varying sample moisture content on matric suction and stress-strain characteristics of unsaturated compacted loess. Two tests are conducted on unsaturated compacted loess with different structural properties: soil-water characteristic curve test and triaxial shear test. Samples are maintained and tested at the same moisture content and dry density through humidification or dehumidification. Test results show that structural changes incurred by sample moisture content markedly influence the soil-water characteristic curve of unsaturated compacted loess. Below the plastic limit, matric suction increases with increasing sample moisture content. At the optimal sample moisture content, unsaturated compacted loess exhibits a homogeneous micro-pore aggregation structure and thus a relatively high suction. In the optimal structural state, the stress-strain curve was located at the top of the stress-strain graph. For moisture contents below the optimal sample moisture content, the degree of structural weakening is relatively low, and the stress-strain curve gradually moves down the stress-strain graph. For moisture content above the optimal sample moisture content, the degree of structural weakening of the soil sample is relatively high, and the stress-strain curve moves to the bottom of the stress-strain graph. A structural parameter mɛr is defined that could reasonably reflect the structural properties of compacted loess and is of great significance for evaluating the engineering quality of compacted loess.

Keywords

Compacted loess Sample moisture content Matric suction Stress-strain curve Structural parameter 

Notes

Acknowledgements

This study was supported by the Fund Program for the National Natural Science Foundation of China, Special Scientific Project of Shaanxi Education Department of China.

The authors would like to thank to the team members of the key discipline of geotechnical engineering and the workers of the geotechnical engineering laboratory.

Funding information

This work was supported by the National Natural Science Foundation of China (No. 51078309) and Special Scientific Project of Shaanxi Education Department of China (No. 16JK1448).

References

  1. ASTM (2011) D2850–15: standard test method for unconsolidated-undrained triaxial compression test on cohesive soils, vol 04.08. West Conshohocken, PennsylvaniaGoogle Scholar
  2. Barden L, Sides GR (1970) Engineering behavior and structure of compacted clay. Journal of Soil Mechanics and Foundation Engineering 96(4):1171–1200Google Scholar
  3. Chen CL, Hu ZQ, Gao P (2006) Research on relationship between structure and deformation property of intact loess. Rock Soil Mech 27(11):1891–1896Google Scholar
  4. Chen CL, Jiang X, Su TZ, Jin J, Li WW (2014) The influence of structure on unconfined compression characteristics of compacted loess. Chin J Rock Mech Eng 33(12):2539–2545Google Scholar
  5. Fredlund DG, Rahardjo H (1993) Soil mechanics for unsaturated soils. Wiley, New York, pp 97–98CrossRefGoogle Scholar
  6. Fredlund DG, Xing A (1994) Equation for the soil-water characteristic curve. Can Geotech J 31(4):521–532CrossRefGoogle Scholar
  7. Gens A (1995) Constitutive modeling: application to compacted soils. In: Proceedings of the 1st international conference of unsaturated soils, Paris, pp 1179–1200Google Scholar
  8. Mei L, Jiang PM, Li P, Zhou AZ (2013) Soil-water characteristic curve tests on unsaturated soil. Chin J Geotech Eng 35(1):124–128Google Scholar
  9. Seed HB, Chan CK (1959) Structure and strength characteristics of compacted clays. J Soil Mech Found Eng 85(5):87–128Google Scholar
  10. Shao SJ, Zhou FF, Long JY (2004) Structural properties of loess and its quantitative parameter. Chin J Geotech Eng 26(4):531–536Google Scholar
  11. Shao SJ, Zheng W, Wang ZH, Wang S (2010) Structural index of loess and its testing method. Rock Soil Mech 31(1):15–19Google Scholar
  12. Shen ZJ (1996) The mathematical model for the structured soils. Chin J Geotech Eng 18(1):95–97Google Scholar
  13. Sivakumar V, Wheeler SJ (2000) Influence of compaction procedure on the mechanical behaviour of an unsaturated compacted clay. Geotechnique 50(4):359–368CrossRefGoogle Scholar
  14. Sivakumar V, Tan WC, Murray EJ, Mckinley JD (2006) Wetting, drying and compression characteristics of compacted clay. Geotechnique 56(1):57–62CrossRefGoogle Scholar
  15. Standardization Administration of China (SAC), Ministry of Water Resources (1999) China National Standards GB/T50123–1999: standard for soil test method. Beijing 100–106Google Scholar
  16. Vanapalli SK, Fredlund DG, Pufahl DE (1999) The influence of soil structure and stress history on the soil-water characteristics of a compacted till. Geotechnique 49(2):143–159CrossRefGoogle Scholar
  17. Wang DL, Luan MT, Yang Q (2009) Experimental study of soil-water characteristic curve of remolded unsaturated clay. Rock Soil Mech 30(3):751–756Google Scholar
  18. Xie DY, Qi JL (1999) Soil structure characteristics and new approach in research on its quantitative parameter. Chin J Geotech Eng 21(6):651–656Google Scholar
  19. Yin PP, Niu SK, Wei CF (2012) Effect of dry density and initial moisture content on soil-water characteristic curve of remolded unsaturated silt. Hydrogeol Eng Geol 39(1):42–46Google Scholar

Copyright information

© Saudi Society for Geosciences 2019

Authors and Affiliations

  1. 1.College of Civil EngineeringXi’ an University of Architecture and TechnologyXi’anChina

Personalised recommendations