Advertisement

Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion

  • 254 Accesses

Correction to: International Journal of Material Forming

Fig. 3
figure1

Predicted anisotropy in plastic properties: (a) variation of the yield stress ratios σ(α)/σ(0) and, (b) Lankford coefficients r(α) with respect to the angle α between the loading axis and the RD axis [100] in the {100}〈001〉 plane corresponding to: m2 =1.39, n1=2.42, n3 =0.37, n4 =6.8, c = 0.35 based on yield stress data for an Al 5% Cu single crystal reported in [26]

https://doi.org/10.1007/s12289-018-01465-0

In the original publication of this paper, an incorrect image of Figure 3 was used in error. Please see below for the correct image.

Author information

Correspondence to Oana Cazacu.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The online version of the original article can be found at https://doi.org/10.1007/s12289-018-01465-0

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Chandola, N., Cazacu, O. & Revil-Baudard, B. Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion. Int J Mater Form 13, 159–160 (2020). https://doi.org/10.1007/s12289-019-01492-5

Download citation