Cooperative control for friction and regenerative braking systems considering dynamic characteristic and temperature condition
The braking system of hybrid electric vehicle (HEV) is composed of friction and regenerative braking system, meaning that braking torque is generated by the collaboration of the friction and regenerative braking system. With the attributes, there are two problems in the HEV braking system. First, rapid deceleration occurs due to dynamic characteristic difference when shifting the friction and regenerative braking systems. Second, the friction braking torque alters with temperature because the friction coefficient changes with the temperature. These problems cause the vehicle to be unstable. In this paper, the concurrence control and compensation control were proposed to solve these problems. And also, the concurrence control and compensation control were combined for the stability of the braking system. In order to confirm the effect of these control algorithms, the experiment and simulation were conducted. Consequently, it was confirmed that the control algorithm of this study improved the vehicle safety and stability.
Key wordsHybrid electric vehicle Friction braking system Regenerative braking system Concurrence control Compensation control
Unable to display preview. Download preview PDF.
- Balotin, J. G., Neis, P. D. and Ferreira, N. F. (2010). Analysis of the influence of temperature on the friction coefficient of friction materials. ABCM Symp. Series in Mechatronics, 4, 898–906.Google Scholar
- Cho, B. K. (2011). Reliability Test of the Electronic Brake System for the Green Car. M. S. Thesis. Sungkyunkwan University. Suwon, Korea.Google Scholar
- Esposito, A. (2008). Fluid Power with Applications. 7th edn. Prentice Hall. Upper Saddle River, New Jersey, USA.Google Scholar
- Golnaraghi, F. and Kuo, B. C. (2009). Automatic Control Systems. 9th edn. John Wiley & Sons. New York.Google Scholar
- Incropera, F. P., Dewitt, D. P., Bergman, T. L. and Lavine, A. S. (2006). Fundamentals of Heat and Mass Transfer. 6th edn. John Wiley & Sons. New York.Google Scholar
- Jun, K. J., Jung, S. P., Yoon, J. W., Jeon, Y. H., Park, T. W. and Yoon, J. H. (2006). Numerical prediction of the brake components temperature rise using friction heat division and conduction. Fall Conf. Proc., Korean Society of Automotive Engineers, 904–909.Google Scholar
- Kwon, M. H., Park, J. H., Gwak, G. S., Huh, J. W. and Hwang, S. H. (2014). Temperature comparison between friction and regenerative braking system using finite difference method. KSAE Annual Conf. Proc., Korean Society of Automotive Engineers, 1330–1331.Google Scholar
- Kwon, M. H., Park, J. H., Gwak, G. S., Huh, J. W. and Hwang, S. H. (2015). Cooperative control algorithm for friction and regenerative braking systems considering temperature characteristics. Proc. EVS28, KINTEX, Korea.Google Scholar
- Lee, K. J. (1999). Numerical prediction of brake fluid temperature rise during braking and heat soaking. SAE Paper No. 1999-01-0483.Google Scholar
- Limpert, R. (1999). Brake Design and Safety. 2nd edn. SAE. Warrendale, Pennsylvania, USA.Google Scholar
- Nam, K. H. (2010). AC Motor Control and Electric Vehicle Applications. CRC Press. Boca Raton, USA.Google Scholar
- Yeo, H., Hwang, S. H. and Kim, H. S. (2006). Regenerative braking algorithm for a hybrid electric vehicle with CVT ratio control. Proc. Instn. Mech. Engrs., Part D: J. Automobile Engineering, 1589–1600.Google Scholar