Influence of Contact Angle Boundary Condition on CFD Simulation of T-Junction
- 90 Downloads
In this work, we study the influence of the contact angle boundary condition on 3D CFD simulations of the bubble generation process occurring in a capillary T-junction. Numerical simulations have been performed with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7. Experimental results serve as a reference to validate numerical results for four independent parameters: the bubble generation frequency, volume, velocity and length. CFD simulations accurately reproduce experimental results both from qualitative and quantitative points of view. Numerical results are very sensitive to the gas-liquid-wall contact angle boundary conditions, confirming that this is a fundamental parameter to obtain accurate CFD results for simulations of this kind of problems.
KeywordsMicrogravity Two-phase flows Bubble generation T-junction Computational Fluid Dynamics (CFD) Contact angle
This work has been financially supported by the Spanish Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación (Project numbers ESP2016-79196-P and MTM2013-46313-R) and the Generalitat de Catalunya (Grant number 2017-SGR-1278).
- ANSYS Academic Research: Release 15.0,7, Help System, ANSYS, Inc (2014)Google Scholar
- Hirt, C.W., Brethour, J.M.: Moving contact lines on rough surfaces. In: 4th European Coating Symposium FloSci-Bib17-01 (2001)Google Scholar
- McQuillen, J., Colin, C., Fabre, J.: Ground-based gas-liquid flow research in microgravity conditions: state of knowledge. Space Forums 3, 165–203 (1998)Google Scholar
- Ostrach, S.: Industrial processes influenced by gravity. NASA CR-182140 c- 21066-G (1988)Google Scholar