Advertisement

Journal of Mechanical Science and Technology

, Volume 33, Issue 11, pp 5137–5145 | Cite as

Design of artificial neural network using particle swarm optimisation for automotive spring durability

  • Y. S. Kong
  • S. AbdullahEmail author
  • D. Schramm
  • M. Z. Omar
  • S. M. Haris
Article
  • 13 Downloads

Abstract

This paper presents the optimisation of spring fatigue life based on an artificial neural network (ANN) architecture and particle swarm optimisation algorithm (PSO) using ISO 2631 vertical vibration as input. The road-induced vibration of a ground vehicle caused the spring to fail due to fatigue and human discomfort. Hence, there is a need to model the relationship between these two parameters for spring design assistance. Vibration and force signals were extracted from a quarter car model simulation for fatigue life and ISO 2631 vertical vibration estimations. PSO was applied to the datasets for ANN weights and biases adjustments while the mean squared error (MSE) was set as the objective function. For validation purposes, a set of independent datasets was applied to the ANN. The residuals were analysed using Lilliefors normality and error histogram. For prediction accuracy, the predicted fatigue lives were analysed using scatter band approach and compared with traditional trained ANN. The results have shown that most of the PSO-based ANN predicted fatigue lives were in the acceptable region and the root mean square error (RMSE) value of 0.6391 life cycles in natural logarithm was obtained. The PSO-based ANN has shown improved performance compared to the conventional ANN approach in predicting fatigue life.

Keywords

Particle swarm optimization Artificial neural network Fatigue life Vertical vibration 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors graciously acknowledge the financial support provided by the Ministry of Education (MOE) Malaysia and Universiti Kebangsaan Malaysia (Project no.: FRGS/1/2015/ TK03/UKM/01/2 and GP-K007552) for this research.

References

  1. [1]
    M. Gohari, R. A. Rahman, M. Tahmasebi and P. Nejat, Off-road vehicle seat suspension optimisation, Part 1: Derivation of an artificial neural network model to predict seated human spine acceleration in vertical vibration, Journal of Low Frequency Noise, Vibration and Active Control, 33(4) (2014) 429–442.CrossRefGoogle Scholar
  2. [2]
    S. Yildirim and I. Uzmay, Neural network applications to vehicle’s vibration analysis, Mechanism and Machine Theory, 38(1) (2003) 27–41.CrossRefGoogle Scholar
  3. [3]
    I. Aljarah, H. Faris and S. Mirjalili, Optimising connection weights in neural networks using the whale optimisation algorithm, Soft Computing, 22(1) (2018) 1–15.CrossRefGoogle Scholar
  4. [4]
    W. Liu, Z. Wang, X. Liu, N. Zeng, Y. Liu and F. E. Alsaadi, A survey of deep neural network architectures and their applications, Neurocomputing, 234 (2017) 11–26.CrossRefGoogle Scholar
  5. [5]
    N. Wang, M. J. Er and M. Han, Generalised single-hidden layer feedforward networks for regression problems, IEEE Transactions on Neural Networks and Learning Systems, 26(6) (2015) 1161–1176.MathSciNetCrossRefGoogle Scholar
  6. [6]
    H. Boughrara, M. Chtourou, C. B. Amar and L. Chen, Facial expression recognition based on a mlp neural network using constructive training algorithm, Multimedia Tools and Applications, 75(2) (2016) 709–731.CrossRefGoogle Scholar
  7. [7]
    B. A. Garro and R. A. Vázquez, Designing artificial neural networks using particle swarm optimisation, Computational Intelligence and Neuroscience (2015).Google Scholar
  8. [8]
    Y. Da and G. Xiurun, An improved PSO-based ANN with simulated annealing technique, Neurocomputing, 63 (2005) 527–533.CrossRefGoogle Scholar
  9. [9]
    E. Momeni, D. J. Armaghani, M. Hajihassani and M. F. Mohd Amin, Prediction of uniaxial compressive strength of rock samples using hybrid particle swarm optimisation-based artificial neural networks, Measurement, 60 (2015) 50–63.CrossRefGoogle Scholar
  10. [10]
    D. L. Guo, H. Y. Hu and J. Q. Yi, Neural network control for a semi-active vehicle suspension with a magnetor-heological damper, Journal of Vibration and Control, 10(3) (2014) 461–471.CrossRefGoogle Scholar
  11. [11]
    A. Jabayalan and N. K. Suresh Kumar, Vibration suppression of quarter car using sliding mode and internal modelbased skyhook controller, Journal of Vibration Engineering and Technologies (2018) 1–10.Google Scholar
  12. [12]
    S. Rajendiran and P. Lakshmi, Simulation of PID and fuzzy logic controller for integrated seat suspension of a quarter car with driver model for different road profiles, Journal of Mechanical Science and Technology, 30(10) (2016) 4565–4570.CrossRefGoogle Scholar
  13. [13]
    M. Heidari and H. Homaei, Design a PID controller for suspension system by back propagation neural network, Journal of Engineering (2013).Google Scholar
  14. [14]
    A. J. Qazi, U. A. Farooqui, A. Khan, M. T. Khan, F. Maz-har and A. Fiaz, Optimisation of semi-active suspension system using particle swarm optimisation algorithm, AASRI Procedia, 4 (2013) 160–166.CrossRefGoogle Scholar
  15. [15]
    W. H. Al-Mutar and T. Y. Abdalla, Quarter car active suspension system control using fuzzy controller tuned by PSO, International Journal of Computer Applications, 127(2) (2015) 160–166.Google Scholar
  16. [16]
    M. Agostinacchio, D. Ciampa and S. Olita, The vibrations induced by surface irregularities in road pavements - A Matlab® approach, European Transport Research Review, 6(3) (2014) 267–275.CrossRefGoogle Scholar
  17. [17]
    Y. Prawoto, M. Ikeda, S. K. Manville and A. Nishikawa, Design and failure modes of automotive suspension springs, Engineering Failure Analysis, 15(8) (2008) 1155–1174.CrossRefGoogle Scholar
  18. [18]
    A. Ince and G. Glinka, A modification of Morrow and Smith-Watson-Topper mean stress correction models, Fatigue and Fracture of Engineering Materials and Structures, 34 (2011) 854–867.CrossRefGoogle Scholar
  19. [19]
    D. E. Woods and B. A. Jawad, Numerical design of race car suspension parameters, SAE Technical Series 1999-01-2257 (1999).Google Scholar
  20. [20]
    R. Poli, J. Kennedy and T. Blackwell, Particle swarm optimization: An overview, Swarm Intelligence, 1(1) (2007).Google Scholar
  21. [21]
    T. Deshamukhya, D. Bhnaja, S. Nath and S. A. Hazarika, Prediction of optimum design variables for maximum heat transfer through a rectangular porous fin using particle swarm optimization, Journal of Mechanical Science and Technology, 32(9) (2018) 4495–4502.CrossRefGoogle Scholar
  22. [22]
    Q. Cai, D. Zhang, W. Zheng and C. H. Leung, A new fuzzy time series forecasting model combined with ant colony optimisation and auto-regression, Knowledge-Based Systems, 74 (2015) 61–68.CrossRefGoogle Scholar
  23. [23]
    M. H. Esfe, A. Naderi, M. Akbari, M. Afrand and A. Karimipour, Evaluation of thermal conductivity of COOH-functionalised MWCNTs/water via temperature and solid volume fraction by using experimental data and ANN methods, Journal of Thermal Analysis and Calorimetry, 121(3) (2015) 1273–1278.CrossRefGoogle Scholar
  24. [24]
    N. W. Razali and B. W. Yap, Power comparisons of Shapiro-Wilk, Kolmogorov-Smirnov, Lilliefors and Anderson-Darling tests, Journal of Statistical Modeling and Analytics, 2(1) (2011) 21–33.Google Scholar
  25. [25]
    A. Muhtar, I. W. Mustika and Suharyanto, The comparison of ANN-BP and ANN-PSO as learning algorithm to track MPP in PVSystem, 2017 7 thInternational Annual Engineering Seminar, Yogyakarta (2017).Google Scholar
  26. [26]
    B. A. Barro and R. A. Vázquez, Designing artificial neural networks using particle swarm optimization, Computational Intelligence and Neuroscience (2015).Google Scholar
  27. [27]
    B. T. Nukala, N. Shibuya, A. Rodriguez, J. Tsay, J. Lopez, T. Nguyen, S. Zupancic and Y. L. Lie, An efficient and robust fall detection system using wireless gait analysis sensor with artificial neural network (ANN) and support vector machine (SVM) algorithms, Open Journal of Applied Biosensor, 3 (2014) 29–39.CrossRefGoogle Scholar
  28. [28]
    ISO 2631/1, Evaluation of human exposure to whole-body vibration: Part 1 - General requirements, International Organization for Standardization, Geneva (1997).Google Scholar
  29. [29]
    M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. No-piah and M. Z. Nuawi, K-means clustering analysis and artificial neural network classification of fatigue strain signals, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(3) (2017) 757–764.CrossRefGoogle Scholar
  30. [30]
    L. G. Almeida, M. Backović, M. Cliche, S. J. Lee and M. Perelstein, Playing tag with ANN: Boosted top identification with pattern recognition, Journal of High Energy Physics (2015) 86.Google Scholar
  31. [31]
    P. Sivák and E. Ostertagová, Evaluation of fatigue tests by means of mathematical statistics, Procedia Engineering, 48 (2012) 636–642.CrossRefGoogle Scholar
  32. [32]
    G. C. Blain, Revisiting the critical values of the Lilliefors test: Towards the correct agrometeorological use of the Kol-mogorov-Smirnov framework, Bragantia, 73(2) (2014) 192–202.CrossRefGoogle Scholar
  33. [33]
    L. Sorrentino, P. Infantino and D. Liberatore, Statistical tests for the goodness of fit of mortar compressive strength distribution, Proceedings of the 16 thInternational Brick and Block Masonry Conference, Italy (2016).Google Scholar
  34. [34]
    R. Ospina and S. L. P. Ferrari, A general class of zero-or-one inflated beta regression models, Computational Statistics and Data Analysis, 56(6) (2012) 1609–1623.MathSciNetCrossRefGoogle Scholar
  35. [35]
    M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. No-piah, M. Z. Nuawi and A. Ariffin, Classification of fatigue damaging segments using artificial neural network, Journal of Mechanical Engineering, SI5 (3) (2018) 61–72.Google Scholar
  36. [36]
    A. Karolczuk, Analysis of revised fatigue life calculation algorithm under proportional and non-proportional loading with constant amplitude, International Journal of Fatigue, 88 (2016) 111–120.CrossRefGoogle Scholar
  37. [37]
    K. Suh and H. Yoon, Durability evaluation of the airlift provision for Korean light tactical vehicles base on fatigue test modes, Journal of Mechanical Science and Technology, 32(3) (2018) 1219–1225.CrossRefGoogle Scholar
  38. [38]
    Z. Zhang, F. Deng, Y. Huang and R. Bridgelall, Road roughness evaluation using in-pavement strain sensors, Smart Materials and Structures, 24(11) (2015) 115029.CrossRefGoogle Scholar
  39. [39]
    A. Halfpenny, S. Hussain, S. McDougall and M. Pompetzki, Investigation of the durability transfer concept for vehicle prognostic application, NDIA Ground Vehicle Systems Engineering and Technology Symposium, U.S.A (2010).Google Scholar
  40. [40]
    A. Ogunoiki and O. Olatunbosun, Artificial road load generator using artificial neural networks, SAE Technical Paper 2015-01-0639 (2015).Google Scholar

Copyright information

© KSME & Springer 2019

Authors and Affiliations

  • Y. S. Kong
    • 1
  • S. Abdullah
    • 1
    Email author
  • D. Schramm
    • 2
  • M. Z. Omar
    • 3
  • S. M. Haris
    • 1
  1. 1.Centre for Integrated Design for Advanced Mechanical Systems (PRISMA), Faculty of Engineering and Built EnvironmentUniversiti Kebangsaan MalaysiaBangiMalaysia
  2. 2.Departmental Chair of MechatronicsUniversity of Duisburg-EssenDuisburgGermany
  3. 3.Centre for Materials Engineering and Smart Manufacturing (MERCU), Faculty of Engineering and Built EnvironmentUniversiti Kebangsaan MalaysiaBangiMalaysia

Personalised recommendations