Advertisement

Journal of Mechanical Science and Technology

, Volume 33, Issue 1, pp 65–76 | Cite as

Vibration control of high-speed trains self-excitation under-chassis equipment by HSLDS vibration isolators

  • Yu Sun
  • Jinsong ZhouEmail author
  • Dao Gong
  • Wenjing Sun
  • Zhanghui Xia
Article
  • 3 Downloads

Abstract

To minimize the self-excitation effects of the equipment on the carbody, a high static and low dynamic stiffness (HSLDS) vibration isolator is proposed by connecting a negative stiffness unit and a positive linear stiffness spring in parallel. The nonlinear stiffness of the HSLDS isolator can be designed according to the needs of any target stiffness curve. A vibration test is applied to obtain the vibration acceleration of the under-chassis equipment. A rigid-flexible coupling multi-body dynamic model of a high-speed train is established which considers the elastic vibration of the carbody and the self-excitation of the under-chassis equipment based on the tested result. Different connection methods of the under-chassis equipment including rigid hanging, vibration isolation theory (VIT) hanging, dynamic vibration absorber (DVA) hanging and HSLDS hanging are applied and their effects on the carbody vibration and ride quality are investigated. The simulation results reveal that the proposed HSLDS vibration isolator can effectively isolate the self-excitation of the under-chassis equipment from the carbody and enhance the ride quality of the high-speed train.

Keywords

Railway vehicle dynamics Equipment self-excitation High static and low dynamic stiffness Under-chassis equipment vibration isolator Ride quality 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    E. Foo and R. M. Goodall, Active suspension control of flexible-bodied railway vehicles using electro-hydraulic and electromagnetic actuators, Control Engineering Practice, 8 (5) (2000) 507–518.CrossRefGoogle Scholar
  2. [2]
    Y. Sugahara et al., Suppression of vertical vibration in railway vehicles by controlling the damping force of primary and secondary suspensions, Qr of Rtri, 49 (1) (2008) 7–15.MathSciNetCrossRefGoogle Scholar
  3. [3]
    E. F. Colombo et al., Active carbody roll control in railway vehicles using hydraulic actuation, Control Engineering Practice, 31 (31) (2014) 24–34.CrossRefGoogle Scholar
  4. [4]
    G. Schandl et al., Comfort enhancement by an active vibration reduction system for a flexible railway car body, Vehicle System Dynamics, 45 (9) (2007) 835–847.CrossRefGoogle Scholar
  5. [5]
    T. Tomioka and T. Takigami, Reduction of bending vibration in railway vehicle carbodies using carbody-bogie dynamic interaction, Vehicle System Dynamics, 48 (sup1) (2010) 467–486.Google Scholar
  6. [6]
    M. Dumitriu, A new passive approach to reducing the carbody vertical bending vibration of railway vehicles, Vehicle System Dynamics, 4 (2017).CrossRefGoogle Scholar
  7. [7]
    D. Gong, J. Zhou and W. Sun, Influence of under-chassis-suspended equipment on high-speed EMU trains and the design of suspension parameters, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230 (8) (2016) 1790–1802.Google Scholar
  8. [8]
    D. Gong, J. Zhou and W. Sun, On the resonant vibration of flexible railway car body and its suppression with DVA, Journal of Vibration and Control, 19 (5) (2013) 649–657.CrossRefGoogle Scholar
  9. [9]
    D. Gong, J. Zhou, W. Sun, Y. Sun and Z. Xia, Method of multi-mode vibration control for the carbody of high-speed electric multiple unit trains, Journal of Sound & Vibration, 409 (2017) 94–111.CrossRefGoogle Scholar
  10. [10]
    W. Sun et al., Analysis of modal frequency optimization of railway vehicle car body, Advances in Mechanical Engineering, 8 (4) (2016) (in Chinese).CrossRefGoogle Scholar
  11. [11]
    W. Sun, D. Gong, J. Zhou and Y. Zhao, Influences of suspended equipment under car body on high-speed train ride quality, Procedia Engineering, 16 (1) (2011) 812–817.CrossRefGoogle Scholar
  12. [12]
    E. I. Rivin, Passive vibration isolation, New York: The American Society of Mechanical Engineers (2003).CrossRefGoogle Scholar
  13. [13]
    Y. Li and D. Xu, Vibration attenuation of high dimensional quasi-zero stiffness floating raft system, International Journal of Mechanical Sciences, 126 (2017) 186–195.CrossRefGoogle Scholar
  14. [14]
    A. Carrella, M. J. Brennan, T. P. Waters and V. Lopes, Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness, International Journal of Mechanical Sciences, 55 (2012) 22–29.CrossRefGoogle Scholar
  15. [15]
    Y. Sun et al., Study on second quasi-zero-stiffness suspension of low-floor tramcar, Journal of Mechanical Engineering, 53 (8) (2017) 132–137 (in Chinese).CrossRefGoogle Scholar
  16. [16]
    P. Alabuzhewv et al., Vibration protecting and measuring systems with quasi-zero stiffness, New York: Taylor & Francis Group (1989).Google Scholar
  17. [17]
    A. Carrella, M. J. Brennan, T. P. Waters and K. Shin, On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets, Journal of Sound & Vibration, 315 (3) (2008) 712–720.CrossRefGoogle Scholar
  18. [18]
    L. Meng and F. Liu, Design and analysis of a quasi-zero stiffness isolator using a slotted conical disk spring as negative stiffness structure, Journal of Vibroengineering, 16 (4) (2014) 1769–1785.Google Scholar
  19. [19]
    R. Guyan, Reduction of stiffness and mass matrices, Aiaa Journal, 3 (2) (1965) 380–380.CrossRefGoogle Scholar
  20. [20]
    Y. Sun et al., A new vibration absorber design for underchassis device of a high-speed train, Shock & Vibration, 2017 (2017) 1–8.Google Scholar
  21. [21]
    P. F. Carlbom, Combining MBS with FEM for rail vehicle dynamics analysis, Multibody System Dynamics, 6 (3) (2001) 291–300.CrossRefzbMATHGoogle Scholar
  22. [22]
    J. Zhou, Railway vehicle vibration and control, Beijing: China Railway Press (2012) (in Chinese).Google Scholar
  23. [23]
    H. Zhang, H. Liu and D. Wang, Spring manual, Beijing: Mechanical engineering Press (2008) (in Chinese).Google Scholar
  24. [24]
    K. Seto, Dynamic vibratin absorber and its applications, Beijing: China Machine Press (2013) (in Chinese).Google Scholar
  25. [25]
    V. K. Garg and R. V. Dukkipati, Dynamics of railway vehicle systems, Academic Press, New York, USA (1984).Google Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Yu Sun
    • 1
  • Jinsong Zhou
    • 1
    Email author
  • Dao Gong
    • 1
  • Wenjing Sun
    • 1
  • Zhanghui Xia
    • 1
  1. 1.Institute of Rail TransitTongji UniversityShanghaiChina

Personalised recommendations