Advertisement

Journal of Mechanical Science and Technology

, Volume 32, Issue 11, pp 5345–5350 | Cite as

Mechanical work-canceling strategy modulates initial push-off force depending on vertical jump height

  • Seyoung Kim
  • Youngsu Son
Article

Abstract

In this study, we examined how jumping strategy changes with increasing vertical jump height from the viewpoint of mechanical work performed on center of mass (CoM) by individual sources (e.g., ground reaction force and gravity) during the countermovement period; we expected that intensity of the countermovement action would change with increasing jump height in a certain manner (e.g., linear relationship), which could be reflected in the changes of the outcome force and/or the work done by each of the individual sources through the countermovement. Six healthy young subjects were instructed to stand upright with both hands on their hips (akimbo posture) and to jump straight up to five different height levels, guided by black markers attached on a ceiling pole. The lowest and highest markers were located at 191 cm and 221 cm from the ground level, respectively. Kinematic and kinetic data obtained from the regular trials were used to estimate mechanical power and work, which were then analyzed to understand the change of the countermovement jump strategy with increasing vertical jump height. We found that 1) mechanical work-canceling strategy modulates initial push-off force depending on the vertical jump height, 2) the initial push-off force was directly determined by asymmetric momentum transformation, and 3) the momentum transformation may be conducted under consideration of accommodating biomechanical constraints.

Keywords

Countermovement jump Jumping strategy Mechanical work-canceling Momentum transformation Initial push-off force 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    N. P. Linthorne, Analysis of standing vertical jumps using a force platform, American Journal of Physics, 69 (11) (2001) 1198–1204.CrossRefGoogle Scholar
  2. [2]
    S. Kim, S. Park and S. Choi, Countermovement strategy changes with vertical jump height to accommodate feasible force constraints, Journal of Biomechanics, 47 (12) (2014) 3162–3168.CrossRefGoogle Scholar
  3. [3]
    Y. Blache and K. Monteil, Effect of arm swing on effective energy during vertical jumping: Experimental and simulation study, Scand J. Med. Sci. Sports, 23 (2) (2013) e121–e129.Google Scholar
  4. [4]
    L. Z. Chiu, M. A. Bryanton and A. N. Moolyk, Proximal–todistal sequencing in vertical jumping with and without arm swing, J. Strength Cond. Res., 28 (5) (2014) 1195–1202.CrossRefGoogle Scholar
  5. [5]
    A. Lees, J. Vanrenterghem and D. D. Clercq, The maximal and submaximal vertical jump: Implications for strength and conditioning, J. Strength Cond. Res., 18 (4) (2004) 787–791.Google Scholar
  6. [6]
    K. E. Zelik and A. D. Kuo, Mechanical work as an indirect measure of subjective costs influencing human movement, PLoS ONE, 7 (2) (2012) e31143.CrossRefGoogle Scholar
  7. [7]
    M. F. Bobbert et al., Why is countermovement jump height greater than squat jump height?, Med. Sci. Sports Exerc., 28 (11) (1996) 1402–1412.CrossRefGoogle Scholar
  8. [8]
    K. Mackala et al., Biomechanical analysis of squat jump and countermovement jump from varying starting positions, J. Strength Cond. Res., 27 (10) (2013) 2650–2661.CrossRefGoogle Scholar
  9. [9]
    G. J. Van Ingen Schenau, M. F. Bobbert and A. De Haan, Does elastic energy enhance work and efficiency in the stretch–shortening cycle?, J. Appl. Biomech., 13 (4) (1997) 389–415.CrossRefGoogle Scholar
  10. [10]
    F. C. Anderson and M. G. Pandy, Storage and utilization of elastic strain energy during jumping, Journal of Biomechanics, 26 (12) (1993) 1413–1427.CrossRefGoogle Scholar
  11. [11]
    P. V. Komi, Stretch–shortening cycle: A powerful model to study normal and fatigued muscle, Journal of Biomechanics, 33 (10) (2000) 1197–1206.CrossRefGoogle Scholar
  12. [12]
    U. Svantesson et al., Use of a Kin–Com dynamometer to study the stretch–shortening cycle during plantar flexion, European Journal of Applied Physiology and Occupational Physiology, 62 (6) (1991) 415–419.CrossRefGoogle Scholar
  13. [13]
    A. Nagano et al., Force, work and power output of lower limb muscles during human maximal–effort countermovement jumping, J Electromyogr Kinesiol, 15 (4) (2005) 367–376.CrossRefGoogle Scholar
  14. [14]
    S. McErlain–Naylor, M. King and M. T. G. Pain, Determinants of countermovement jump performance: A kinetic and kinematic analysis, Journal of Sports Sciences, 32 (19) (2014) 1805–1812.CrossRefGoogle Scholar
  15. [15]
    P. C. Raffalt, T. Alkjaer and E. B. Simonsen, Joint dynamics and intra–subject variability during countermovement jumps in children and adults, J. Biomech., 49 (13) (2016) 2968–2974.CrossRefGoogle Scholar
  16. [16]
    J. Sinclair, P. J. Taylor and S. J. Hobbs, Digital filtering of three–dimensional lower extremity kinematics: An assessment, Journal of Human Kinetics, 39 (2013) 25–36.CrossRefGoogle Scholar
  17. [17]
    G. Giakas and V. Baltzopoulos, Optimal digital filtering requires a different cut–off frequency strategy for the determination of the higher derivatives, Journal of Biomechanics, 30 (8) (1997) 851–855.CrossRefGoogle Scholar
  18. [18]
    T. A. Burkhart, C. E. Dunning and D. M. Andrews, Determining the optimal system–specific cut–off frequencies for filtering in–vitro upper extremity impact force and acceleration data by residual analysis, J. Biomech., 44 (15) (2011) 2728–2731.CrossRefGoogle Scholar
  19. [19]
    T. Fekete et al., The NIRS analysis package: Noise reduction and statistical inference, PLoS ONE, 6 (9) (2011) e24322.Google Scholar
  20. [20]
    S. Kim and S. Park, Leg stiffness increases with speed to modulate gait frequency and propulsion energy, Journal of Biomechanics, 44 (7) (2011) 1253–1258.CrossRefGoogle Scholar
  21. [21]
    S. Kim et al., Postural feedback scaling deficits in Parkinson's disease, J. Neurophysiol, 102 (5) (2009) 2910–2920.CrossRefGoogle Scholar
  22. [22]
    S. Park, F. B. Horak and A. D. Kuo, Postural feedback responses scale with biomechanical constraints in human standing, Exp. Brain Res., 154 (4) (2004) 417–427.CrossRefGoogle Scholar
  23. [23]
    C. Thomas et al., An investigation into the relationship between maximum isometric strength and vertical jump performance, J. Strength Cond. Res., 29 (8) (2015) 2176–2185.CrossRefGoogle Scholar
  24. [24]
    J. Yamauchi et al., Force–velocity, force–power relationships of bilateral and unilateral leg multi–joint movements in young and elderly women, J. Biomech., 42 (13) (2009) 2151–2157.CrossRefGoogle Scholar
  25. [25]
    A. S. Salles, V. Baltzopoulos and J. Rittweger, Differential effects of countermovement magnitude and volitional effort on vertical jumping, European Journal of Applied Physiology, 111 (3) (2011) 441–448.CrossRefGoogle Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Robotics and MechatronicsKorea Institute of Machinery & Materials (KIMM)DaejeonKorea

Personalised recommendations