Advertisement

Journal of Mechanical Science and Technology

, Volume 32, Issue 11, pp 5097–5104 | Cite as

A method of determining test load for full-scale wind turbine blade fatigue tests

  • Qiang Ma
  • Zong-Wen An
  • Jian-Xiong Gao
  • Hai-Xia Kou
  • Xue-Zong Bai
Article
  • 12 Downloads

Abstract

Full-scale fatigue test is an effective method for validating the fatigue performance of wind turbine blade. Its primary problem is how to design the test load. The conventional approach to determine test load requires a complicated and time-consuming process. Thus, a simplified method for directly converting load spectrum of blade into test load is proposed in this paper. Firstly, beam theory is used to obtain the relationship between stress, strain and bending moment of blade cross section. Based on the assumption of local stress concentration and linear relationship between stress and strain, M-N curves (applied moment vs. allowable number of cycles to failure) is defined. Secondly, based on Miner's linear cumulative damage theory and constant life diagram, the equivalent fatigue cumulative damage of load spectrum which is equal to the damage of full-scale fatigue test is obtained. Then, in the case of the selected test load ratio and cycles, the mean and amplitude of test load can be solved. Finally, the validity of the proposed method is verified by an illustrative example. The result indicates that the error of the calculated results between this method and the traditional method is close to 5 %, and it can be used for fatigue test and improve the efficiency of test load design.

Keywords

Fatigue damage Full-scale fatigue test Load spectrum Test load Wind turbine blade 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Caithness Windfarm Information Forum, Summary of wind turbine accident data to 31 March 2017, Available at: http://www.caithnesswindfarms.co.uk.Google Scholar
  2. [2]
    International Electrotechnical Commission, IEC 61400–1 Wind turbines part 1: Design requirements (2005).Google Scholar
  3. [3]
    International Electrotechnical Commission, IEC 61400–23 Wind turbines Part 23: Full–scale structural testing of rotor blades (2014).Google Scholar
  4. [4]
    X. Guo, X. Fu, H. Shang and J. Chen, Integrated aerostructural optimization design of pre–bend wind turbine blades, Journal of Mechanical Science and Technology, 30 (11) (2016) 5103–5113.CrossRefGoogle Scholar
  5. [5]
    P. Malhotra, R. W. Hyers, J. F. Manwell and J. G. McGowan, A review and design study of blade testing systems for utility–scale wind turbines, Renewable and Sustainable Energy Reviews, 16 (2012) 284–292.CrossRefGoogle Scholar
  6. [6]
    H. F. Zhou, H. Y. Dou, L. Z. Qin, Y. Chen, Y. Q. Ni and J. M. Ko, A review of full–scale structural testing of wind turbine blades, Renewable and Sustainable Energy Reviews, 33 (2014) 177–187.CrossRefGoogle Scholar
  7. [7]
    P. Brøndsted and R. P. Nijssen, Advances in wind turbine blade design and materials, Woodhead Publishing, Cambridge, UK (2013).CrossRefGoogle Scholar
  8. [8]
    G. Freebury and W. Musial, Determining equivalent damage loading for full–scale wind turbine blade fatigue tests, Proceedings of the 19th American Society of Mechanical Engineers (ASME) Wind Energy Symposium, Reno, Nevada, USA (2000) 50.Google Scholar
  9. [9]
    S. Larwood and W. Musial, Comprehensive testing of Nedwind 12–Meter wind turbine blades at NREL, Proceedings of the 19th American Society of Mechanical Engineers (ASME) Wind Energy Symposium, Reno, Nevada, USA (2000) 51.Google Scholar
  10. [10]
    R. P. L. Nijssen, Fatigue life prediction and strength degradation of wind turbine rotor blade composites, Contractor Report SAND2006–7810P, Sandia National Laboratories, Albuquerque, New Mexico, USA (2006).Google Scholar
  11. [11]
    Y. H. Huh, J. H. Lee, D. J. Kim and Y. S. Lee, Effect of stress ratio on fatigue life of GFRP composites for WT blade, Journal of Mechanical Science and Technology, 26 (7) (2012) 2117–2120.CrossRefGoogle Scholar
  12. [12]
    P. R. Greaves, Fatigue analysis and testing of wind turbine blades, Doctoral Dissertation, Durham University (2013).Google Scholar
  13. [13]
    J. C. Dai, W. Hu and X. B. Shen, Load and dynamic characteristic analysis of wind turbine flexible blades, Journal of Mechanical Science and Technology, 31 (4) (2017) 1569–1580.CrossRefGoogle Scholar
  14. [14]
    O. A. Bauchau and J. I. Craig, Structural analysis: With applications to aerospace structures. Springer, New York, USA (2009).CrossRefGoogle Scholar
  15. [15]
    Germanischer Lloyd, Guideline for the certification of wind turbines (2010).Google Scholar
  16. [16]
    S. Larwood, W. Musial, G. Freebury and A. G. Beattie, NedWind 25 blade testing at NREL for the European standards measurement and testing program, National Renewable Energy Lab., Golden, Colorado, USA (2001).Google Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Qiang Ma
    • 1
  • Zong-Wen An
    • 1
  • Jian-Xiong Gao
    • 1
  • Hai-Xia Kou
    • 1
  • Xue-Zong Bai
    • 1
  1. 1.School of Mechanical and Electronical Engineering, LanzhouUniversity of TechnologyLanzhou, GansuChina

Personalised recommendations