Journal of Mechanical Science and Technology

, Volume 28, Issue 7, pp 2493–2499 | Cite as

Frequency capture characteristics of vibration system with two degrees of freedom

  • Sun ZhijunEmail author
  • Hou Li
  • Wei Yongqiao
  • Li Bo
  • Jia Fenglan


In this study, the dynamical model of the vibration of the wind power system was established according to the Lagrange’s principle for investigating the phenomenon of frequency capture. The system response of the vibration of wind power device in the horizontal and vertical directions of tower was analyzed by numerical simulation. At the same time, the paper analyzed the characteristics of the vibration model comparing with the traditional model. Then the conditions of frequency capture were studied through the analysis of mathematical model. In particular, the effects that five key parameters had on the frequency capture characteristics were analyzed. Finally, the research reveal that reducing the eccentric mass and eccentricity of the blade, increasing the support stiffness and displacement damping coefficient, and increasing the torque of the input shaft can reduce vibration and avoid the phenomenon of frequency capture. The simulation results provide the theory basis for the design and installation of wind power device.


Frequency capture Simulation Vibration system Wind power system 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. [1]
    Xiong Wanli, Lu Mingzhang and Wen Bangchun, Characteristics of rotating frequency cathing of non-ideal vibration systems, Natural Sciences, Journal of Hunan University, 30 (3) (2003) 44–48.Google Scholar
  2. [2]
    Han Qingkai, Yao Hongliang and Wen Bangchun, Simulation and experiment analyses on resonance for a rotor system with elastic supports, Proceeding of IDETC/CIE2007, ASME2007, USA, EDTC2007-34420 (2007).Google Scholar
  3. [3]
    Zhang Nan, Hou Xiaolin and Wen Bangchun, Characteristics of frequency capture of nonlinear vibration systems, Natural Sciences, Journal of Dongbei University, 30 (8) (2009) 1170–1173.Google Scholar
  4. [4]
    Zhang Leian and Wu Jianzhong, Frequency capture characteristics in wind blade fatgue loading process, Engineering Science Edition, Journal of Sichuan University, 43 (6) (2011) 248–252.Google Scholar
  5. [5]
    Han Qingkai et al. Frequency capture simulation and experiment of a rotor system with elastic supports, Journal of Vibrate and Shock, 27 (8) (2008) 63–66.Google Scholar
  6. [6]
    Zniber A and Quinn D. Frequency shifting in nonlinear resonant systems with damping, Proceedings of the 2003 ASME Design Engineering Technical Conferences, Chicago, DETC2003/VIB-48444 (2003).Google Scholar
  7. [7]
    Wen Bangchun et al., Engineering nonlinear vibration, Science Press, Beijing (2008).Google Scholar
  8. [8]
    J.M. Balthazar, B.I. Cheshankov, D.T. Ruschev, L. Barbantiand H.I. Weber, Remarks on the passage though resonance of a vibrating system with two degrees of freedom, excited by a non-ideal energy source, Journal of Sound and Vibration, 239 (5) (2001) 1075–1085.CrossRefzbMATHGoogle Scholar
  9. [9]
    Lee Hwanhee, Song Ji-Seok and Cha Seog-Ju, Dynamic response of coupled shaft torsion and blade bending in rotor blade system, Journal of Mechanical Science and Technology, 27 (9) (2013) 2585–2597.CrossRefGoogle Scholar
  10. [10]
    Huang Chao, Wang Jiaxu and Xiao Ke, Dynamic characteristics and experimental research on a new type planetary gear apparatus with small tooth number difference, Journal of Mechanical Science and Technology, 27 (5) (2013) 1233–1244.CrossRefMathSciNetGoogle Scholar
  11. [11]
    Xiong Wanli, Wen Bangchun and Duan Zhishan, Mechanism of electromechanical-coupling on self-synchronous vibration and vibratory synchronization transmission, Journal of Vibration Engineering, 13 (3) (2000) 325–331.Google Scholar
  12. [12]
    Wang Degang, Zhao Chunyu, Ren Chaohui and Wen Bangchun, Frequency-based capture control on revertible dual-motor-driven vibration system, Chinese Journal of Construction Machinery, 6 (3) (2008) 282–286.Google Scholar
  13. [13]
    Zhao Chunyu, Wang Degang, Zhang Hao, Li Jie and Wen Bang chun, Frequency capture of vibration system with twomotor drives rotating in same direction, Chinese Journal of Applied Mechanics, 26 (2) (2009) 283–287.Google Scholar
  14. [14]
    R.M.L.R.F. Brasil, L.C.S. Feitosaand J.M. Balthazar, A nonlinear and non-ideal wind generator supporting structure, Applied Mechanics and Materials, Modern Practice in Stress and Vibration Analysis VI, Proceedings of the 6th Internaional Conference on Modern Practice in Stress and Vibration Analysis, v 5–6 (2006) 433–442.Google Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg 2014

Authors and Affiliations

  • Sun Zhijun
    • 1
    Email author
  • Hou Li
    • 1
  • Wei Yongqiao
    • 1
  • Li Bo
    • 1
  • Jia Fenglan
    • 1
  1. 1.School of Manufacturing Science and EngineeringSichuan UniversityChengduChina

Personalised recommendations