Advertisement

Journal of Mechanical Science and Technology

, Volume 27, Issue 11, pp 3531–3539 | Cite as

Analysis and modeling of exhaust gas temperature in an ethanol fuelled HCCI engine

  • Bahram BahriEmail author
  • Azhar Abdul Aziz
  • Mahdi Shahbakhti
  • Mohd Farid Muhamad Said
Article

Abstract

Low exhaust temperature in homogeneous charge compression ignition (HCCI) significantly limits efficiency of an exhaust aftertreatment system to mitigate high HC and CO emissions in HCCI engines. This article aims to understand the effect of varying input parameters on HCCI exhaust gas temperature (Texh) for an ethanol fuelled engine. A single cylinder engine is used to collect experimental data at 100 different HCCI conditions. The results indicate that variation in combustion parameters such as start of combustion (SOC), burn duration (BD) and maximum in-cylinder pressure (Pmax) are not effectively correlated with variations of Texh, but the indicated mean effective pressure (IMEP) and constant-volume adiabatic flame temperature (Tad) are strongly related to Texh. These experimental findings were then used to design an artificial neural network (ANN) model to predict Texh. The model was validated with the experimental data, indicating an average error less than 4.5°C between predicted and measured Texh.

Keywords

HCCI Ethanol combustion Exhaust gas temperature Artificial neural network 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    K. Ryu and Y. Oh, A study on the usability of biodiesel fuel derived from rice bran oil as an alternative fuel for IDI diesel engine, KSME International Journal, 17(2) (2003) 310–317.Google Scholar
  2. [2]
    N. Jamsran and O. T. Lim, A numerical analysis of the effects of a stratified pre-mixture on homogeneous charge compression ignition combustion, Journal of Mechanical Science and Technology, 26(6) (2012) 1929–1935.CrossRefGoogle Scholar
  3. [3]
    R. Stanglmaier and C. Roberts, Homogeneous charge compression ignition (HCCI): benefits, compromises and future engine applications, SAE Paper (1999) 1999-01-3682.Google Scholar
  4. [4]
    M. Sjoberg and J. E. Dec, Ethanol autoignition characteristics and HCCI performance for wide ranges of engine speed, load and boost, SAE International Journal of Engines, 3(5) (2010) 84–106.Google Scholar
  5. [5]
    M. Christensen, B. Johansson and P. Einewall, Homogeneous charge compression ignition (HCCI) using isooctane, ethanol and natural gas: A comparison with spark ignition operation, SAE Paper (1997) 972874.Google Scholar
  6. [6]
    M. Dehghani Firoozabadi, M. Shahbakhti, C. R. Koch and S. A. Jazayeri, Thermodynamic control-oriented modeling of cycle-to-cycle exhaust gas temperature in an HCCI engine, Applied Energy, 110(0) (2013) 236–43.CrossRefGoogle Scholar
  7. [7]
    O. S. Kwon and O. T. Lim, Effect of the boost pressure on thermal stratification in HCCI engine using multi-zone model, Journal of Mechanical Science and Technology, 24(1) (2010) 399–406.CrossRefGoogle Scholar
  8. [8]
    J. Yang, T. Culp and T. Kenney, Development of a gasoline engine system using technology — the concept and the test results, SAE Paper (2002) 2002-01-2832.Google Scholar
  9. [9]
    H. Kim, J. Ryu and K. Lee, A study on the characteristics of spray and combustion in a HCCI engine according to various injection angles and timings, Journal of Mechanical Science and Technology, 21(1) (2007) 133–140.CrossRefGoogle Scholar
  10. [10]
    D. Jung, O. Kwon and O. T. Lim, Comparison of DME HCCI operating ranges for the thermal stratification and fuel stratification based on a multi-zone model, Journal of Mechanical Science and Technology, 25(6) (2011) 1383–1390.CrossRefGoogle Scholar
  11. [11]
    B. Bahri, A. A. Aziz, M. Shahbakhti and M. F. Muhamad Said, Understanding and detecting misfire in an HCCI engine fuelled with ethanol, Applied Energy, 108 (2013) 24–33.CrossRefGoogle Scholar
  12. [12]
    V. Ferrari, H. Rabinowitz, S. Siemund, 345 T. Collinq and B. Campbell, Achieving EURO III and IV with ultra-low precious metal loadings, SAE Paper (2007) 2007-01-2565.Google Scholar
  13. [13]
    E. Jean, V. Leroy, G. Montenegro, A. Onorati and M. Laurell, Impact of ultra-low thermal inertia manifolds on emission performance, SAE Paper (2007) 2007-01-0935.Google Scholar
  14. [14]
    K. Tanikawa, T. Hirota, T. Yamada, M. Komori, G. Zhang and H. Muraki, Development of advanced three-way catalyst technology, SAE Paper (2008) 2008-01-164.Google Scholar
  15. [15]
    M. Shahbakhti, A. Ghazimirsaied and C. R. Koch, Experimental study of exhaust temperature variation in a homogeneous charge compression ignition engine, Journal of Automobile Engineering, 224(9) (2010) 1177–97.CrossRefGoogle Scholar
  16. [16]
    G. M. Rassweiler and L. Withrow, Motion pictures of engine flames correlated with pressure cards, SAE Paper (1938) 380139.Google Scholar
  17. [17]
    M. Shahbakhti and C. R. Koch, Characterizing the cyclic variability of ignition timing in a homogeneous charge compression ignition engine fuelled with n-heptane/iso-octane blend fuels, International Journal of Engine Research, 9(10) (2008) 361–97.CrossRefGoogle Scholar
  18. [18]
    J. B. Heywood, International Combustion Engine Fundamentals, McGraw-Hill Company, New York, USA (1988).Google Scholar
  19. [19]
    S. Williams, L. Hu, T. Nakazono and M. Uchida, Oxidation catalysts for natural gas engine operating under HCCI or SI conditions, SAE Paper (2008) 2008-01-0807.Google Scholar
  20. [20]
    J. Sadeghi and H. Askarinejad, Application of neural networks in evaluation of railway track quality condition, Journal of Mechanical Science and Technology, 26(1) (2012) 113–22.CrossRefGoogle Scholar
  21. [21]
    Y. Choi, and J. Y. Chen, Fast prediction of start-ofcombustion in HCCI with combined artificial neural networks and ignition delay model, Proceedings of the Combustion Institute, 30(2) (2005) 2711–18.CrossRefGoogle Scholar
  22. [22]
    S. M. Aceves, D. L. Flowers, J. Y. Chen and A. Babajimopoulos, Fast prediction of HCCI combustion with an artificial neural network linked to a fluid mechanics code, SAE Paper (2006) 2006-01-3298.Google Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  • Bahram Bahri
    • 1
    Email author
  • Azhar Abdul Aziz
    • 1
  • Mahdi Shahbakhti
    • 2
  • Mohd Farid Muhamad Said
    • 1
  1. 1.Automotive Development Center (ADC), Faculty of Mechanical EngineeringUniversiti Teknologi Malaysia (UTM)Johor BahruMalaysia
  2. 2.Department of Mechanical Engineering — Engineering MechanicsMichigan Technological UniversityHoughtonUSA

Personalised recommendations