Journal of Mechanical Science and Technology

, Volume 26, Issue 11, pp 3399–3410 | Cite as

Free vibration analysis of multi-directional functionally graded circular and annular plates

  • Iman Davoodi Kermani
  • Mostafa Ghayour
  • Hamid Reza Mirdamadi
Article
First Online:
Received:
Revised:
Accepted:

Abstract

This paper addresses the free vibration of multi-directional functionally graded circular and annular plates using a semianalytical/ numerical method, called state space-based differential quadrature method. Three-dimensional elasticity equations are derived for multi-directional functionally graded plates and a solution is given by the semi-analytical/numerical method. This method gives an analytical solution along the thickness direction, using a state space method and a numerical solution using differential quadrature method. Some numerical examples are presented to show the accuracy and convergence of the method. The most of simulations of the present study have been validated by the existing literature. The non-dimensional frequencies and corresponding displacements mode shapes are obtained. Then the influences of thickness ratio and graded indexes are demonstrated on the non-dimensional natural frequencies.

Keywords

Circular plates Differential quadrature method Free vibration Functionally graded materials (FGM) Multi-directional State space-based formulation 
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    T. Prakash and M. Ganapathi, Asymmetric flexural vibration and thermoelastic stability of FGM circular plates using finite element method, Composites Part B-Engineering, 37 (2006) 642–649.CrossRefGoogle Scholar
  2. [2]
    E. Efraim and M. Eisenberger, Exact vibration analysis of variable thickness thick annular isotropic and FGM plates, Sound and Vibration, 299 (2007) 720–738.CrossRefGoogle Scholar
  3. [3]
    C. Y. Dong, Three-dimensional free vibration analysis of functionally graded annular plates using the Chebyshev-Ritz method, Materials and Design, 29 (2008) 1518–1525.CrossRefGoogle Scholar
  4. [4]
    A. Allahverdizadeh, M. H. Naei and M. Nikkhah Bahrami, Nonlinear free and forced vibration analysis of thin circular functionally graded plates, Sound and Vibration, 310 (2008) 966–984.CrossRefGoogle Scholar
  5. [5]
    G. J. Nie and Z. Zhong, Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges, Composite Structures, 84 (2008) 167–176.CrossRefGoogle Scholar
  6. [6]
    A. Rastgoo, Analytical investigation on axisymmetric free vibrations of moderately thick circular functionally graded plate integrated with piezoelectric layers, Journal of Mechanical Science and Technology, 22 (2008) 1058–1072.CrossRefGoogle Scholar
  7. [7]
    P. Malekzadeh, M. M. Atashi and G. Karami, In-plane free vibration of functionally graded circular arches with temperature-dependent properties under thermal environment, Sound and Vibration, 326 (2009) 837–851.CrossRefGoogle Scholar
  8. [8]
    F. Ebrahimi, Geometrically nonlinear vibration analysis of piezoelectrically actuated FGM plate with an initial large deformation, Journal of Mechanical Science and Technology, 23 (2009) 2107–2124.CrossRefGoogle Scholar
  9. [9]
    A. Ghorbanpour Arani, A. Loghman, A. R. Shajari and S. Amir, Semi-analytical solution of magneto-thermo-elastic stresses for functionally graded variable thickness rotating disks, Journal of Mechanical Science and Technology, 24 (2010) 2107–2117.CrossRefGoogle Scholar
  10. [10]
    M. Malekzadeh, A. Shahpari and H. R. Ziaee, Threedimensional free vibration of thick functionally graded annular plates in thermal environment, Sound and Vibration, 329 (2010) 425–442.CrossRefGoogle Scholar
  11. [11]
    S. Hosseini Hashemi, M. Fadaee and M. Eshaghi, A novel approach for in-plane/out-of-plane frequency analysis of functionally graded circular/annular plates, International Journal of Mechanical Sciences, 52 (2010) 1025–1035.CrossRefGoogle Scholar
  12. [12]
    A. Shahrjerdi, F. Mustapha, M. Bayat and D. L. A. Majid, Free vibration analysis of solar functionally graded plates with temperaturedependent material properties using second order shear deformation theory, Journal of Mechanical Science and Technology, 25 (2011) 2195–2209.CrossRefGoogle Scholar
  13. [13]
    Y. X. Hao, W. Zhang, J. Yang and S. Y. Li, nonlinear dynamic response of a simply supported rectangular functionally graded material plate under the time-dependent thermalmechanical loads, Journal of Mechanical Science and Technology, 25 (2011) 1637–1646.CrossRefGoogle Scholar
  14. [14]
    L. F. Qian and R. C. Batra, Design of bidirectional functionally graded plate for optimal natural frequencies, Sound and Vibration, 280 (2005) 415–424.CrossRefGoogle Scholar
  15. [15]
    G. Nie and Z. Zhong, Axisymmetric bending of two-directional functionally graded circular and annular plates, Acta Mechanica Solida Sinica, 20 (2007) 289–295.Google Scholar
  16. [16]
    C. F. Lu, W. Q. Chen, R. Q. Xu and C. W. Lim, Semianalytical elasticity solutions for bi-directional functionally graded beams, International Journal of Solids and Structures, 45 (2008) 258–275.CrossRefGoogle Scholar
  17. [17]
    M. Nemat-alla, K. I. E. Ahmed and I. Hassab-alla, Elasticplastic analysis of two-directional functionally graded materials under thermal loading, International Journal of Solids and Structures, 46 (2009) 2774–2786.MATHCrossRefGoogle Scholar
  18. [18]
    C. F. Lu, C. W. Lim and W. Q. Chen, Semi-analytical analysis for multi-directional functionally graded plates: 3-D elasticity solutions, International Journal of Numerical Methods in Engineering, 79 (2009) 25–44.MathSciNetCrossRefGoogle Scholar
  19. [19]
    G. J. Nie and Z. Zhong, Dynamic analysis of multidirectional functionally graded annular plates, Applied Mathematical Modelling, 34 (2010) 608–616.MathSciNetMATHCrossRefGoogle Scholar
  20. [20]
    B. Sobhani Aragh, H. Hedayati, E. Borzabadi Farahani and M. Hedayati, Anovel 2-D six-parameter power-law distribution for free vibration and vibrational displacements of two-dimensional functionally graded fiber-reinforced curved panels, European Journal of Mechanics A-Solids, 30 (2011) 865–883.MathSciNetCrossRefGoogle Scholar
  21. [21]
    K. M. Liew and F. L. Liu, Differential quadrature method for vibration analysis of shear deformable annular sector plates, Sound and Vibration, 230 (2000) 335–356.CrossRefGoogle Scholar
  22. [22]
    S. Kitipornchai, J. Yang and K. M. Liew, Semi-analytical solution for nonlinear vibration of laminated FGM plates with geometric imperfections, International Journal of Solids and Structures, 41 (2004) 2235–2257.MATHCrossRefGoogle Scholar
  23. [23]
    D. Redekop, Three-dimensional free vibration analysis of inhomogeneous thick orthotropic shells of revolution using differential quadrature, Sound and Vibration, 291 (2006) 1029–1040.CrossRefGoogle Scholar
  24. [24]
    K. Kang, Vibration analysis of thin-walled curved beams using DQM, Journal of Mechanical Science and Technology, 21 (2007) 1207–1217.CrossRefGoogle Scholar
  25. [25]
    A. Krowiak, Methods based on the differential quadrature in vibration analysis of plates, Journal of Theoretical and Applied Mechanics, 46 (2008) 123–139.Google Scholar
  26. [26]
    F. Tornabene, Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution, Computer Method in Applied Mechanics and Engineering, 198 (2009) 2911–2935.MATHCrossRefGoogle Scholar
  27. [27]
    F. Tornabene, E. Viola and D. J. Inman, 2-D differential quadrature solution for vibration analysis of functionally graded conical, cylindrical shell and annular plate structures, Sound and Vibration, 328 (2009) 259–290.CrossRefGoogle Scholar
  28. [28]
    S. Hosseini Hashemi, H. Rokni damavandi Taher and H. Akhavan, Vibration analysis of radially FGM sectorial plates of variable thickness on elastic foundation, Composite Structures, 92 (2010) 1734–1743.CrossRefGoogle Scholar
  29. [29]
    W. Q. Chen, C. F. Lv and Z. G. Bian, Free vibration analysis of generally laminated beams via state-space-based differential quadrature, Composite Structures, 63 (2004) 417–425.CrossRefGoogle Scholar
  30. [30]
    G. J. Nie and Z. Zhong, Semi-analytical solution for three-dimensional vibration of functionally graded circular plates, Computer Method in Applied Mechanics and Engineering, 196 (2007) 4901–4910.MATHCrossRefGoogle Scholar
  31. [31]
    L. Yang and S. Zhifei, Free vibration of a functionally graded piezoelectric beam via state-space based differential quadrature, Composite Structures, 87 (2009) 257–264.CrossRefGoogle Scholar
  32. [32]
    A. Jodaei, M. Jalal and M. H. Yas, Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN, Composites Part B-Engineering, 43 (2012) 340–353.CrossRefGoogle Scholar
  33. [33]
    F. Delale and F. Erdogan, The crack problem for a nonhomogeneous plane, ASME Journal of Applied Mechanics, 50 (1983) 609–614.MATHCrossRefGoogle Scholar
  34. [34]
    C. W. Bert and M. Malik, Differential quadrature method in computational mechanics: A review, Applied Mechanics Reviews, 49 (1996) 1–27.CrossRefGoogle Scholar
  35. [35]
    F. R. Gantmacher, The Theory of Matrices, Chelsea, New York, USA (1960).Google Scholar
  36. [36]
    C. F. Liu and Y. T. Lee, Finite element analysis of three-dimensional vibrations of thick circular and annular plates, Sound and Vibration, 233 (2000) 63–80.MathSciNetCrossRefGoogle Scholar

Copyright information

© The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  • Iman Davoodi Kermani
    • 1
  • Mostafa Ghayour
    • 1
  • Hamid Reza Mirdamadi
    • 1
  1. 1.Department of Mechanical EngineeringIsfahan University of TechnologyIsfahanIran

Personalised recommendations