Advertisement

KSCE Journal of Civil Engineering

, Volume 23, Issue 4, pp 1682–1690 | Cite as

Accelerated Life Testing of Concrete based on Three-parameter Weibull Stochastic Approach

  • Xiangke Guo
  • Hongxia QiaoEmail author
  • Binrong Zhu
  • Penghui Wang
  • Shaoyong Wen
Structural Engineering
  • 14 Downloads

Abstract

Due to the time-varying characteristics of the durability of a concrete structure, a long duration of exposure and monitoring in natural conditions is required. The present research provided the indoor accelerated life testing of concrete, which simulated the special natural environments in the Xining area, including solar radiation, dry-wet circulation, freeze-thaw cycle, and salt corrosion. The measured dynamic modulus was taken as an evaluation index for the durability of concrete, and the change of the relative dynamic modulus of the specimen was studied. Meanwhile, a two-parameter Weibull distribution and three-parameter Weibull distribution were proposed based on the stochastic analysis method in order to assess the durability of concrete structure. It has been observed that the indoor accelerated life testing of concrete can make up for the shortcomings of long-term exposure under natural conditions. The variation of the relative dynamic modulus can effectively reflect the durability of the concrete degradation process. By contrasting two methods of stochastic analysis, the three-parameter Weibull distribution method is better to fit the accelerated life data of concrete specimens and to evaluate the durability of concrete structures during service.

Keywords

concrete accelerated life testing three-parameter Weibull distribution fitting reliability assessment 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Afroughsabet, V., Biolzi, L., and Ozbakkaloglu, T. (2017). “Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete.” Composite Structures, Vol. 181, pp. 273–284, DOI:  https://doi.org/10.1016/j.compstruct.2017.08.086.CrossRefGoogle Scholar
  2. Belleghem, B. V., Heede, P. V. d., Tittelboom, K. V., Nele, D. B. (2016). “Quantification of the service life extension and environmental benefit of chloride exposed self-healing concrete.” Materials, Vol. 10, No. 5, pp. 5–22, DOI:  https://doi.org/10.3390/ma10010005.CrossRefGoogle Scholar
  3. Bilim, M., Kapucu, N., and Develi, I. (2017). “Cooperative IDMA systems with regenerative relays over Weibull fading channels: Outage probability and error analysis.” IET Commun, Vol. 11, No. 7, pp. 993–999, DOI:  https://doi.org/10.1049/iet-com.2016.1322.CrossRefGoogle Scholar
  4. Chantarangsi, W., Liu, W., Bretz, F., Kiatsupaibul, S., Hayter, A. J., and Wan, F. (2015). “Normal probability plots with confidence.” Biometrical Journal, Vol. 57, No. 1, pp. 52–63, DOI:  https://doi.org/10.1002/bimj.201300244.MathSciNetCrossRefzbMATHGoogle Scholar
  5. Chen, Y., Gao, J., Tang, L., and Li, X. (2016). “Resistance of concrete against combined attack of chloride and sulfate under drying-wetting cycles.” Constr. Build, Mater., Vol. 106, No. 4, pp. 650–658, DOI:  https://doi.org/10.1016/j.conbuildmat.2015.12.151.CrossRefGoogle Scholar
  6. China National Standards (2006). Standard of water for concrete, JGJ 63–2006, Ministry of Construction of the People’s Republic of China, Beijing, China.Google Scholar
  7. China National Standards (2007). Common Portland cement, GB 175–2007, General Administration of Quality Supervision, Inspection and Quarantine of People’s Republic of China & Standardization Administration of China, Beijing, China.Google Scholar
  8. China National Standards (2009). Standard for test methods of longterm performance and durability of ordinary concrete, GB/T 50082-2009, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China.Google Scholar
  9. Conciatori, D., Étienne Grégoire, Éric Samson, Marchand, J., and Chouinard, L. (2015). “Sensitivity of chloride ingress modelling in concrete to input parameter variability.” Materials and Structures, Vol. 48, No. 9, pp. 3023–3036, DOI:  https://doi.org/10.1617/s11527-014-0374-8.CrossRefGoogle Scholar
  10. Demis, S., Efstathiou, M. P. and Papadakis, V. G. (2014). “Computeraided modeling of concrete service life.” Cement and Concrete Composites, Vol. 47, pp. 9–18, DOI:  https://doi.org/10.1016/j.cemconcomp.2013.11.004.CrossRefGoogle Scholar
  11. Develi, I. and Kabalci, Y. (2016). “A comparative simulation study on the performance of LDPC coded communication systems over Weibull fading channels.” Journal of Applied Research and Technology, Vol. 14, No. 2, pp. 101–107, DOI:  https://doi.org/10.1016/j.jart.2016.04.001.CrossRefGoogle Scholar
  12. Foy, C., Pigeon, M., and Banthia, N. (1988). “Freeze-thaw durability and deicer salt scaling resistance of a 0.25 water-cement ratio concrete.” Cement Concrete Res., Vol. 18, No. 4, pp. 604–614, DOI:  https://doi.org/10.1016/0008-8846(88)90053-1.CrossRefGoogle Scholar
  13. Han, Y. S. and Zhang, H. P. (2011). “Notice of retraction preventive measures and subgrade diseases of highway in the region of saline soil in Xinjing.”International Conference on Electric Technology, pp. 563–566, DOI:  https://doi.org/10.1109/ICETCE.2011.5774284.Google Scholar
  14. Kuosa, H., Ferreira, R. M., Holt, E., Leivo, M., and Vesikari, E. (2014). “Effect of coupled deterioration by freeze-thaw, carbonation and chlorides on concrete service life.” Cement and Concrete Composites, Vol. 47, pp. 32–40, DOI:  https://doi.org/10.1016/j.cemconcomp.2013.10.008.CrossRefGoogle Scholar
  15. Lapko, A. V. and Lapko, V. A. (2012). “Comparison of empirical and theoretical distribution functions of a random variable on the basis of a nonparametric classifier.” Optoelectronics Instrumentation and Data Processing, Vol. 48, No. 1, pp. 44–50, DOI:  https://doi.org/10.3103/S8756699012010050.CrossRefGoogle Scholar
  16. Li, B. X., Cai, L. H., Wang, K., and Zhang Y. M. (2016). “Prediction of the residual strength for durability failure of concrete structure in acidic environments.” Journal of Wuhan University of Technology-Materials Science Edition, Vol. 31, No. 2, pp. 340–344, DOI:  https://doi.org/10.1007/s11595-016-1373-0.CrossRefGoogle Scholar
  17. Li, T., Griffiths, W. D., and Chen, J. (2017). “Weibull modulus estimated by the non-linear least squares method: A solution to deviation occurring in traditional weibull estimation.” Metallurgical & Materials Transactions A, Vol. 48, No. 11, pp. 5516–5528, DOI:  https://doi.org/10.1007/s11661-017-4294-4.CrossRefGoogle Scholar
  18. Omrane, M., Kenai, S., Kadri, E. H., and Aït-Mokhtar, A. (2017). “Performance and durability of self compacting concrete using recycled concrete aggregates and natural pozzolan.” Journal of Cleaner Production, Vol. 165, pp. 415–430, DOI:  https://doi.org/10.3390/ma10010005.CrossRefGoogle Scholar
  19. Rozga, P. (2016). “Using the three-parameter weibull distribution in assessment of threshold strength of pressboard impregnated by different liquid dielectrics.” Iet Science Measurement & Technology, Vol. 10, No. 6, pp. 665–670, DOI:  https://doi.org/10.1049/iet-smt.2016.0061.CrossRefGoogle Scholar
  20. Ryan, P. C. and O’Connor, A. J. (2013). “Probabilistic analysis of the time to chloride induced corrosion for different self-compacting concretes.” Construction and Building Materials, Vol. 47, No. 10, pp. 1106–1116, DOI:  https://doi.org/10.1016/j.conbuildmat.2013.05.110.CrossRefGoogle Scholar
  21. Sadati, S., Moradllo, M. K., and Shekarchi, M. (2017). “Long-term performance of silica fume concrete in soil exposure of marine environments.” Journal of Materials in Civil Engineering, Vol. 29, No. 9, pp. 1–9, DOI:  https://doi.org/10.1061/(ASCE)MT.1943-5533.0001962.CrossRefGoogle Scholar
  22. Sotiriadis, K., Nikolopoulou, E., and Tsivilis, S. (2012). “Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature.” Cement Concrete Compos, Vol. 34, No. 8, pp. 903–910, DOI:  https://doi.org/10.1016/j.cemconcomp.2012.05.006.CrossRefGoogle Scholar
  23. Ta, V. L., Bonnet, S., Kiesse, T. S., and Ventura, A. (2016). “A new meta-model to calculate carbonation front depth within concrete structures.” Construction and Building Materials, Vol. 129, pp. 172–181, DOI:  https://doi.org/10.1016/j.conbuildmat.2016.10.103.CrossRefGoogle Scholar
  24. Wang, J., Ersan, Y. C., Boon, N., and Belie, N. D. (2016). “Application of microorganisms in concrete: A promising sustainable strategy to improve concrete durability.” Applied Microbiology and Biotechnology, Vol. 100, No. 7, pp.2993-3007, DOI:  https://doi.org/10.1007/s00253-016-7370-6.Google Scholar
  25. Wang, K. J., Nelsen, D. E., and Nixon, W. A. (2006). “Damaging effects of deicing chemicals on concrete materials.” Cement Concrete Compos, Vol. 28, No. 2, pp. 173–188, DOI:  https://doi.org/10.1016/j.cemconcomp.2005.07.006.CrossRefGoogle Scholar
  26. Yagoub, Y. E., Li, Z., Musa, O. S., Anjum, M. N., and Zhang, B. (2017). “Correlation between climate factors and vegetation cover in qinghai province, China.” Journal of Geographic Information System, Vol. 9, No. 4, pp. 403–419, DOI:  https://doi.org/10.4236/jgis.2017.94025.CrossRefGoogle Scholar
  27. Ye, Y. H., Lu, G. Y., Li, Y. Z., and Jin, M. (2017). “Unilateral right-tail anderson-darling test based spectrum sensing for cognitive radio.” Electronics Letters, Vol. 53, No. 18, pp. 1256–1258, DOI:  https://doi.org/10.1049/el.2017.0323.CrossRefGoogle Scholar
  28. Yin, Z. G., Feng, J., Huang, S. Y., and Zhao, B. F. (2014). “Experimental study of frost-resistance properties of silica fume concrete.” Applied Mechanics & Materials, Vol.. 584–586, pp. 1626–1629, DOI:  https://doi.org/10.4028/www.scientific.net/AMM.584-586.1626.Google Scholar
  29. Yoganandan, N., Pintar, F. A., and Banerjee, A. (2017). “Load-based lower neck injury criteria for females from rear impact from cadaver experiments.” Annals of Biomedical Engineering, Vol. 45, No. 5, pp. 1–10, DOI:  https://doi.org/10.1007/s10439-016-1773-5.CrossRefGoogle Scholar
  30. Zhang, J. X., Ma, B. C., Ran, J., and Wei, J. J. (2015). “Research on comprehensive durability of cement concrete under simulated natural condition.” Concrete, Vol. 2, No. 18, pp. 21–25, DOI:  https://doi.org/10.3969/j.issn.1002-3550.2015.02.005.Google Scholar
  31. Zhang, L. and Su, X. P. (2014). “Comparison and selection of the durability evaluating parameters of concrete in saline soil region.” Advanced Materials Research, Vol.. 919–921, pp. 1751–1754, DOI:  https://doi.org/10.4028/www.scientific.net/AMR.919-921.1751.Google Scholar
  32. Zhang, L. F., Xie, M., and Tang, L. C. (2007). “A study of two estimation approaches for parameters of Weibull distribution based on WPP.” Reliability Engineering and System Safety, Vol. 92, No. 3, pp. 360–368, DOI:  https://doi.org/10.1016/j.ress.2006.04.008.CrossRefGoogle Scholar
  33. Zhu, Y. Y., Cui, H. Z., and Tang, W. C. (2016). “Experimental investigation of the effect of manufactured sand and lightweight sand on the properties of fresh and hardened self-compacting lightweight concretes.” Materials, Vol. 9, No. 9, pp. 1–17, DOI:  https://doi.org/10.3390/ma9090735.CrossRefGoogle Scholar
  34. Zou, F. B., Tan, H. B., Guo, Y. L. Ma, B., He, X., and Yang, Z. (2017). “Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain.” Journal of Industrial and Engineering Chemistry, Vol. 55, pp. 91–100, DOI:  https://doi.org/10.1016/j.jiec.2017.06.032.CrossRefGoogle Scholar

Copyright information

© Korean Society of Civil Engineers 2019

Authors and Affiliations

  • Xiangke Guo
    • 1
  • Hongxia Qiao
    • 1
    Email author
  • Binrong Zhu
    • 2
  • Penghui Wang
    • 1
  • Shaoyong Wen
    • 1
  1. 1.School of Civil EngineeringLanzhou University of TechnologyLanzhouChina
  2. 2.School of Civil EngineeringSoutheast China UniversityNanjingChina

Personalised recommendations