KSCE Journal of Civil Engineering

, Volume 15, Issue 2, pp 245–249 | Cite as

Characteristics and continuous operation of floating air-cathode microbial fuel cell (FA-MFC) for wastewater treatment and electricity generation

Article
First Online:
Received:
Revised:
Accepted:
  • 563 Downloads

Abstract

Microbial fuel cell with floating air-cathode is developed for not only wastewater treatment but also electricity generation from the wastewater. Graphite felt and carbon cloth coated with Pt of 5 gm−2 are used as anode and cathode electrodes in this system, respectively. When organic loading rate is 15.38 kgCODm−3day−1, maximum power density is 119.7 mWm−2 with about 60% of Coulombic efficiency. Electrode spacing between anode and cathode is one of the important factors for electricity generation. Power density increases from 60.35 mWm−2 to 121.68mWm−2 by reducing electrode spacing from 2.8 to 1.2 cm. This system has total internal resistance of 18.43 Ω, which is very low compared with other researches. Maximum power density of 628.8 mWm−2 is accomplished with Coulombic efficiency of 30.3% by continuous operation of four FA-MFC reactors that are connected by series. When COD concentrations of influent are 500 and 250 mgL−1, its removal rates are 63.3% and 83.7%, respectively.

Keywords

air-cathode microbial fuel cell (MFC) continuous operation internal resistance 
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Aelterman, P., Rabaey, K., Pham, T. H., Boon, N., and Verstraete, W. (2006). “Continuous electricity generation at high voltages and currents using stacked microbial fuel cells.” Environ. Sci. Tech., Vol. 48, No. 10, pp 3388–3394.CrossRefGoogle Scholar
  2. An, J., Kim, D., Chun, Y., Lee, S., Ng, H. Y., and Chang, I. S. (2009). “Floating-type microbial fuel cell (FT-MFC) for treating organiccontaminated water.” Environ. Sci. Technol., Vol. 43, No. 5, pp. 1642–1647.CrossRefGoogle Scholar
  3. APHA, AWWA, and WEF (1992). Standard methods for the examination of water and wastewater, 18th Ed., NW Washington, Washington DC, pp. 5-8–5-10.Google Scholar
  4. Cheng, S., Liu, H., and Logan, B. (2006). “Increased power generation in a continuous flow MFC w/advective flow through the porous anode and reduced electrode spacing.” Environ. Sci. Technol., Vol. 40, No. 7, pp. 2426–2432.CrossRefGoogle Scholar
  5. Daniel, D. K., Mankidy, B. D., Ambarish, K., and Manogari, R. (2009). “Construction and operation of a microbial fuel cell for electricity generation from wastewater.” Int. Journal of Hydrogen Energy, Vol. 34, No. 17, pp. 7555–7560.CrossRefGoogle Scholar
  6. Freguia, S., Rabaey, K., Yuan, Z., and Keller, J. (2008). “Sequential anode-cathode configuration improves cathodic oxygen reduction and effluent quality of MFCs.” Wat. Res., Vol. 42, Nos. 6–7, pp. 1387–1396.CrossRefGoogle Scholar
  7. He, Z., Minteer, S. D., and Angenent, L. T. (2005). “Electricity generation from artificial wastewater using an upflow microbial fuel cell.” Environ. Sci. Tech., Vol. 39, No. 14, pp. 5262–5267.CrossRefGoogle Scholar
  8. Heijne, A. T., Hamelers, H. V. M., Wilde, V. D., Rozendal, R. A., and Buisman, C. J. N. (2007). “A bipolar membrane combined with ferric iron reduction as an efficient cathode system in microbial fuel cells.” Environ. Sci. Technol., Vol. 40, No. 17, pp. 5200–5205.CrossRefGoogle Scholar
  9. Keller, J. and Rabaey, K. (2008). “Experiences from MFC pilot plant operation: How to get the technology market-ready?” The 1st International Symposium on Microbial Fuel Cell, May 27–29, Penn. State Univ. USA.Google Scholar
  10. Li, Z., Yao, L., Kong, L., and Liu, H. (2008). “Electricity generation using a baffled MFC convenient for stacking.” Bioresource Technol., Vol. 99, No. 6, pp. 1650–1655.CrossRefGoogle Scholar
  11. Liu, H., Cheng, S., and Logan, B. E. (2005). “Power generation in fedbatch MFC as a function of ionic-strength, temp, and reactor configuration.” Environ. Sci. Technol., Vol. 39, No. 14, pp 5488–5493.CrossRefGoogle Scholar
  12. Lorenzo, M. D., Scott, K., Curtis, T. P., and Head, I. M. (2009). “Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell.” Chem. Eng. J., Vol. 156, No. 1, pp. 40–48.CrossRefGoogle Scholar
  13. Oh, S., Min, B., and Logan, B. E. (2004). “Cathode performance as a factor in electricity generation in microbial fuel cells.” Environ. Sci. Technol., Vol. 38, No. 18, pp. 4900–4904.CrossRefGoogle Scholar
  14. Park, D. H., and Zeikus, J. G. (2003). “Improved fuel cell and electrode designs for producing electricity from microbial degradation.” Biotechnol. Bioengineering, Vol. 81, No. 3, pp. 348–355.CrossRefGoogle Scholar
  15. Rabaey, K., Boon, N., Siciliano, S. D., Verhaege, M., and Verstraete, W. (2004). “Biofuel cells select for microbial consortia that self-mediate electron transfer.” Appl. Environ. Microbiol., Vol. 70, No. 9, pp. 5373–5382.CrossRefGoogle Scholar
  16. Rabaey, K., Clauwaert, P., Aelterman, P., and Verstraete, W. (2005). “Tubular microbial fuel cells for efficient electricity generation.” Environ. Sci. Tech., Vol. 39, No. 20, pp. 8077–8082.CrossRefGoogle Scholar
  17. Wang, X., Feng, Y., Ren, N., Wang, H., Lee, H., Li, N., and Zhar, Q. (2009). “Accelerated strat-up of two-chambered micirbial fuel cells: Effect of anodic positive poised potential.” Electrochimica Acta, Vol. 54, No. 3, pp. 1109–1114.CrossRefGoogle Scholar
  18. You, S., Zhao, Q., Zhang, J., Liu, H., Jiang, J., and Zhao, S. (2008). “Increased sustainable electricity generation in up-flow air-cathode MFCs.” Biosensors and Bioelectronics, Vol. 23, No. 7, pp. 1157–1160.CrossRefGoogle Scholar
  19. Yu, E. H., Cheng, S., Scott, K., and Logan, B. (2007). “MFC performance w/non-Pt cathode catalysts.” J. of Power Source, Vol. 171, No. 2, pp. 275–281.CrossRefGoogle Scholar

Copyright information

© Korean Society of Civil Engineers and Springer-Verlag Berlin Heidelberg 2011

Authors and Affiliations

  1. 1.Dept. of Civil & Environmental EngineeringJeonju UniversityJeonjuKorea
  2. 2.Dept. of Environmental EngineeringKorea Maritime UniversityBusanKorea
  3. 3.School of Electrical, Electronic, Information and Communication EngineeringJeonju UniversityJeonjuKorea

Personalised recommendations