Advertisement

Optimization of Clinching Tools by Integrated Finite Element Model and Genetic Algorithm Approach

  • Menghan Wang (王梦寒)Email author
  • Guiqian Xiao (肖贵乾)
  • Jinqiang Wang (王晋强)
  • Zhi Li (李志)
Article
  • 12 Downloads

Abstract

Clinching is a convenient and efficient cold forming process that can join two sheets without any additional part. This study establishes an intelligent system for optimizing the clinched joint. Firstly, a mathematical model which introduces the ductile damage constraint to prevent cracking during clinching process is proposed. Meanwhile, an optimization methodology and its corresponding computer program are developed by integrated finite element model (FEM) and genetic algorithm (GA) approach. Secondly, Al6061-T4 alloy sheets with a thickness of 1.4mm are used to verify this optimization system. The optimization program automatically acquires the largest axial strength which is approximately equal to 872N. Finally, sensitivity analysis is implemented, in which the influence of geometrical parameters of clinching tools on final joint strength is analyzed. The sensitivity analysis indicates the main parameters to influence joint strength, which is essential from an industrial point of view.

Key words

mechanical clinching optimization design genetic algorithm (GA) ductile damage 

CLC number

TG 938 

Document code

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    VARIS J P, LEPISTö J. A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters [J]. Thin-Walled Structures, 2003, 41(8): 691–709.CrossRefGoogle Scholar
  2. [2]
    HAMEL V, ROELANDT J M, GACEL J N, et al. Finite element modeling of clinch forming with automatic remeshing [J]. Computers and Structures, 2000, 77(2): 185–200.CrossRefGoogle Scholar
  3. [3]
    COPPIETERS S, LAVA P, BAES S, et al. Analytical method to predict the pull-out strength of clinched connections [J]. Thin-Walled Structures, 2012, 52(1): 42–52.CrossRefGoogle Scholar
  4. [4]
    COPPIETERS S, LAVA P, HECKE R V, et al. Numerical and experimental study of the multi-axial quasistatic strength of clinched connections [J]. International Journal of Material Forming, 2012, 6(4): 437–451.CrossRefGoogle Scholar
  5. [5]
    LAMBIASE F, ILIO A D. Damage analysis in mechanical clinching: Experimental and numerical study [J]. Journal of Materials Processing Technology, 2016, 230: 109–120.CrossRefGoogle Scholar
  6. [6]
    COPPIETERS S, COOREMAN S, LAVA P, et al. Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA [J]. International Journal of Material Forming, 2010, 4(4): 429–440.CrossRefGoogle Scholar
  7. [7]
    OUDJENE M, BEN-AYED L. On the parametrical study of clinch joining of metallic sheets using the Taguchi method [J]. Engineering Structures, 2008, 30(6): 1782–1788.CrossRefGoogle Scholar
  8. [8]
    LAMBIASE F, ILIO A D. Optimization of the clinching tools by means of integrated FE modeling and artificial intelligence techniques [J]. Procedia CIRP, 2013, 12: 163–168.CrossRefGoogle Scholar
  9. [9]
    ROUX E, BOUCHARD P O. Kriging metamodel global optimization of clinching joining processes accounting for ductile damage [J]. Journal of Materials Processing Technology, 2013, 213(7): 1038–1047.CrossRefGoogle Scholar
  10. [10]
    SUN X, KHALEEL M A. Performance optimization of self-piercing rivets through analytical rivet strength estimation [J]. Journal of Manufacturing Processes, 2005, 7(1): 83–93.CrossRefGoogle Scholar
  11. [11]
    OUDJENE M, BEN-AYED L, DELAMéZIèRE A, et al. Shape optimization of clinching tools using the response surface methodology with moving least-square approximation [J]. Journal of Materials Processing Technology, 2009, 209(1): 289–296.CrossRefGoogle Scholar
  12. [12]
    LEBAAL N, OUDJENE M, ROTH S. The optimal design of sheet metal forming processes: Application to the clinching of thin sheets [J]. International Journal of Computer Applications in Technology, 2012, 43(2): 110–116.CrossRefGoogle Scholar
  13. [13]
    LEE C J, KIM J Y, LEE S K, et al. Design of mechanical clinching tools for joining of aluminium alloy sheets [J]. Materials and Design, 2010, 31(4): 1854–1861.CrossRefGoogle Scholar
  14. [14]
    LEE C J, KIM J Y, LEE S K, et al. Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets [J]. Journal of Mechanical Science and Technology, 2010, 24(1): 123–126.CrossRefGoogle Scholar
  15. [15]
    GERSTMANN T, AWISZUS B. Recent developments in flat-clinching [J]. Computational Materials Science, 2014, 81(2): 39–44.CrossRefGoogle Scholar
  16. [16]
    HAMBLI R, RESZKA M. Fracture criteria identification using an inverse technique method and blanking experiment [J]. International Journal of Mechanical Sciences, 2002, 44(7): 1349–1361.CrossRefGoogle Scholar
  17. [17]
    CHEN C, ZHAO S D, HAN X L, et al. Optimization of a reshaping rivet to reduce the protrusion height and increase the strength of clinched joints [J]. Journal of Materials Processing Technology, 2016, 234: 1–9.CrossRefGoogle Scholar
  18. [18]
    LEE C J, LEE J M, RYU H Y, et al. Design of hole-clinching process for joining of dissimilar materials Al6061-T4 alloy with DP780 steel, hot-pressed 22MnB5 steel, and carbon fiber reinforced plastic [J]. Journal of Materials Processing Technology, 2014, 214(10): 2169–2178.CrossRefGoogle Scholar

Copyright information

© Shanghai Jiao Tong University and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Menghan Wang (王梦寒)
    • 1
    Email author
  • Guiqian Xiao (肖贵乾)
    • 1
  • Jinqiang Wang (王晋强)
    • 1
  • Zhi Li (李志)
    • 1
  1. 1.College of Materials Science and EngineeringChongqing UniversityChongqingChina

Personalised recommendations