Advertisement

Sādhanā

, 44:221 | Cite as

A novel and precise on-line digital measurement of unsaturated phase inductance of a switched reluctance motor

  • Devraj RoyEmail author
  • Mainak Sengupta
Article
  • 49 Downloads

Abstract

This paper presents a simple and accurate method for the on-line measurement of the unsaturated phase inductance of a switched reluctance motor (SRM). The basic principle behind the approach is to obtain the instantaneous flux linkage of the phase, which when divided by the instantaneous current of the corresponding phase will dynamically generate the phase inductance for that rotor position. A numerical division process, based on Newton–Raphson (N–R) iterative method, has been implemented using the sensed current and estimated flux linkage on an FPGA platform to generate the inductance value at each instant. It is ensured in the practical implementation that the iron parts do not saturate. It has been also verified through simulation using standard finite-element method (FEM) software packages. Further, it has been established that the effect of mutual inductance is negligibly small. The proposed method will give the true value of the unsaturated inductance of the phase identified for diagnosis/measurement. Practical results, for the experiments conducted on an existing 4 kW, 1500 rpm Oulton-make SRM, have been also presented. They are further validated against the results obtained from FEM analysis and against previously published results of the phase inductance values for this SRM. The results are found to be in very good agreement.

Keywords

Switched reluctance motor on-line inductance measurement magnetic saturation Newton–Raphson method hysteresis switching FEM analysis 

Notes

Acknowledgements

The authors would like to acknowledge the co-operation received from the research colleagues at the APE Laboratory, Department of Electrical Engineering, IIEST Shibpur, and from the institute authorities. Assistance received from Mr N Dutta needs special mention.

References

  1. 1.
    Venkatratnam K 2008 Special electrical machines. Hyderabad, India: Universities PressGoogle Scholar
  2. 2.
    Sengupta M 1999 Theory, performance prediction and indirect rotor position sensing of a switched reluctance motor under bulk saturation. PhD Thesis, Department of Electrical Engineering, IIT KharagpurGoogle Scholar
  3. 3.
    Sengupta M, Das S and Sengupta A 2010 Elements of design, fabrication and analysis for a light SR Motor. Germany: VDM Verlag Dr. MullerGoogle Scholar
  4. 4.
    Miller T J E 1993 Switched reluctance motors and their control. In: Monographs in Electrical and Electronic Engineering. Hillsboro: Magna PhysicsGoogle Scholar
  5. 5.
    Krishnan R 2001 Switched reluctance motor drives. Boca Raton, Florida: CRC PressGoogle Scholar
  6. 6.
    Radun A 1998 Analytical calculation of the switched reluctance motor’s unaligned inductance. IEEE Trans. Magn. 35(6): 4473–4481CrossRefGoogle Scholar
  7. 7.
    Materu P and Krishnan R 1990 Analytical prediction of SRM inductance profile and steady-state average torque. In: IEEE Industry Application Society Annual Meeting Conference Record, pp. 214–223Google Scholar
  8. 8.
    Kuai S, Rallabandi V and Ionel D 2017 Sensorless control of three phase switched reluctance motor drives using an approximate inductance model. In: Proceedings of the IEEE International Electric Machines and Drives Conference (IEMDC), pp. 1–6Google Scholar
  9. 9.
    Ozden S, Manav G and Dursun M 2018 ANN based magnetic field and inductance modeling of double sided linear switched reluctance motor. In: Proceedings of the 5th International Conference on Electrical and Electronics Engineering, pp. 133–137Google Scholar
  10. 10.
    Xiang Q, Sun Y and Ji X 2011 Modeling inductance for bearingless switched reluctance motor based on PSO-LSSVM. In: Proceedings of the Chinese Control and Decision Conference (CCDC), pp. 800–803Google Scholar
  11. 11.
    Venkatratnam K, Bhattacharya T K and Sengupta M 1999 Theory, performance prediction and indirect sensing of rotor position of a switched reluctance motor under saturation. IEE Proc.- EPA 146(6): 667–677Google Scholar
  12. 12.
    Pohl R 1946 Theory of pulsating field machines. J. IEE 93(31): 37–47Google Scholar
  13. 13.
    Murthy S S, Singh B and Sharma V K 1997 A frequency response method to estimate inductance profile of switched reluctance motor. In: Proceedings of the IEEE International Conference on Power Electronics and Drive Systems (PEDES), pp. 181–187Google Scholar
  14. 14.
    Ferkova Z, Suchy L and Cernohorsky J 2017 Measurement of switched reluctance motor parameters. In: Proceedings of the 19th International Conference on Electrical Drives and Power Electronics (EDPE), pp. 287–290Google Scholar
  15. 15.
    Radimov N, Ben-Hail N and Rabinovici R 2005 Inductance measurements in switched reluctance machines. IEEE Trans. Magn. 41(4): 1296–1299CrossRefGoogle Scholar
  16. 16.
    Zhang P, Cassani P A and Williamson S S 2010 An accurate inductance profile measurement technique for switched reluctance machines. IEEE Trans. Ind. Electron. 57(9): 2972–2979CrossRefGoogle Scholar
  17. 17.
    Treek D, Matuschek P, Brauer H J, Schoenen T and De Doncker R W 2009 An automatic identification of phase inductance for operation of switched reluctance machines without position sensor. In: Proceedings of the IEEE International Electrical Machines and Drives Conference, pp. 1005–1009Google Scholar
  18. 18.
    Ehsani M and Ramani K R 1996 Direct control strategies based on sensing inductance in switched reluctance motors. IEEE Trans. Power Electron. 11(1): 74–82CrossRefGoogle Scholar
  19. 19.
    Hamouda M and Szamel L 2017 Accurate measurement and verification of static magnetization characteristics for switched reluctance motors. In: Proceedings of the Nineteenth International Middle East Power Systems Conference (MEPCON), pp. 948–953Google Scholar
  20. 20.
    Ustun O 2009 Measurement and real-time modeling of inductance and flux linkage in switched reluctance motors. IEEE Trans. Magn. 45(12): 5376–5382CrossRefGoogle Scholar
  21. 21.
    Li X and Shamsi P 2015 Inductance surface learning for model predictive current control of switched reluctance motors. IEEE Trans. Transp. Electrif. 1(3): 287–297CrossRefGoogle Scholar
  22. 22.
    Cai J and Deng Z 2012 Sensorless control of switched reluctance motor based on phase inductance vectors. IEEE Trans. Power Electron. 27(7): 3410–3423CrossRefGoogle Scholar
  23. 23.
    Wang J, Ma Q, Zhang P and Ye W 2017 Sensorless control of a four phase switched reluctance machine with novel bridge converter. In: Proceedings of the Chinese Automation Congress (CAC), pp. 6674–6679Google Scholar
  24. 24.
    Cai J, Lu L, Liu Z, Jia H, Zhao X and Xu F 2017 An inductive position sensor with switched reluctance motor structure. In: Proceedings of the 20th International Conference on Electrical Machines and Systems (ICEMS), pp. 1–4Google Scholar
  25. 25.
    Ralev I, Max S and Doncker R 2018 Accurate rotor position detection for low-speed operation of switched reluctance drives. In: Proceedings of the 18th International Power Electronics and Motion Control Conference (PEMC), pp. 483–490Google Scholar
  26. 26.
    Venkataratnam K, Sengupta M, Chattopadhyay A K and Bhattacharjee R 2003 Development and experimental validation of a novel analytical model for performance prediction of SR motors under saturation. In: Proceedings of the IEEE Fifth International Conference on Power Electronics and Drive Systems, pp. 948–953Google Scholar
  27. 27.
  28. 28.
    Kreyszig E 2006 Advanced engineering mathematics. New Delhi: Wiley India Pvt. LimitedzbMATHGoogle Scholar
  29. 29.
    Nenadic N M and Mladenovic S B 2005 Fast division on fixed-point DSP processors using Newton–Raphson method. In: Proceedings of the International Conference on Computer as a Tool, pp. 705–708Google Scholar
  30. 30.
    Vestias M P and Neto H C 2011 Revisiting the Newton–Raphson method for decimal division. In: Proceedings of the 21st International Conference on Field Programmable Logic and Application, pp. 136–143Google Scholar
  31. 31.
    Hoyle D F Function approximation. 2018-04-05, available at: https://people.ucsc.edu/~ealdrich/Teaching/ComputationGroup/Slides/lec4.pdf
  32. 32.
    Ramanarayanan V 2007 Lecture notes of short term course on FPGA real time controller and simulator. Bangalore, India: IIScGoogle Scholar
  33. 33.
    Chaudhury S B, Sengupta M and Mukherjee K 2013 Experimental study of induction motor misalignment and its online detection through data fusion. IET Electr. Power Appl. 7(1): 58–67CrossRefGoogle Scholar

Copyright information

© Indian Academy of Sciences 2019

Authors and Affiliations

  1. 1.Department of Electrical EngineeringIndian Institute of Engineering Science and TechnologyShibpur, HowrahIndia

Personalised recommendations