Advertisement

Optimized synthesis of highly reactive UV-curable hyperbranched polyester acrylates

  • Sacha Pérocheau Arnaud
  • Payam Hashemi
  • Petra Mischnick
  • Tobias RobertEmail author
Article
  • 12 Downloads

Abstract

Highly reactive radical polyester acrylates are widely used as UV-curing binder resins for printing inks, coatings, and materials for additive manufacturing. Especially for the latter, polyesters with low viscosities are of high interest, as they allow for UV-curing materials with reduced amounts of reactive diluents to adjust the viscosity. One possibility to obtain polyester acrylates with low viscosities is the synthesis of hyperbranched structures, as the interactions of the polymer chains are reduced in comparison to their linear counterparts. In this study, an optimized synthetic protocol is described to obtain a set of highly branched polyester acrylates with a high degree of acrylation, without the use of activated reagents like anhydrides or acid chlorides that are usually employed to synthesize these products. Different cores and number of pseudo-generations of 2,2-bis(hydroxymethyl)propionic (bisMPA) are utilized to study the structure–property relationship of this class of polyesters. Comprehensive characterization of the synthesized resins and cured materials revealed high reactivities and good mechanical properties compared to similar materials reported in the literature. The design of the structure significantly influences the properties, allowing for the synthesis of specific resins with a wide range of potential applications.

Keywords

Hyperbranched polyesters UV-curing resins Esterification Structure–property relationship Polyol core 

Notes

Acknowledgments

S.P.A. and T.R. would like to thank Professor Tunga Salthammer for fruitful discussions and the Projekträger Jülich and the Federal Ministry of Education and Research for financial support.

Supplementary material

11998_2019_247_MOESM1_ESM.docx (667 kb)
Supplementary material 1 (DOCX 667 kb)

References

  1. 1.
    Prieto, J, Kiene, J, Wood Coatings. Vincentz Network, Hannover, pp. 122–125 (2018)Google Scholar
  2. 2.
    Mukohyama, H, Oka, H, Shibusawa, K, “Diluent for UV and EB Curable Resins.” US Patent 4,886,840, 1989Google Scholar
  3. 3.
    Higgins, E, Collins, P, “Urticarial Allergic Contact Dermatitis Caused by UV-Cured Printing Ink.” Contact Dermat., 66 340–341 (2012)CrossRefGoogle Scholar
  4. 4.
    Aalto-Korte, K, Henriks-Eckerman, M-L, Kuuliala, O, Jolanki, R, “Occupational Methacrylate and Acrylate Allergy-Cross-Reactions and Possible Screening Allergens.” Contact Dermat., 63 301–312 (2010)CrossRefGoogle Scholar
  5. 5.
    Dorganm, SJ, Knauss, DM, Al-Muallem, HA, Huang, T, Vlassopoulos, D, “Melt Rheology of Dendritically Branched Polystyrenes.” Macromolecules, 36 380–388 (2003)CrossRefGoogle Scholar
  6. 6.
    Park, SJ, Shanbhag, S, Larson, RG, “A Hierarchical Algorithm for Predicting the Linear Viscoelastic Properties of Polymer Melts with Long-Chain Branching.” Rheol. Acta, 44 (3) 319–330 (2005)CrossRefGoogle Scholar
  7. 7.
    Inkson, N, Graham, R, McLeish, T, Groves, D, Fernyhough, C, “Viscoelasticity of Monodisperse Comb Polymer Melts.” Macromolecules, 39 4217–4227 (2006)CrossRefGoogle Scholar
  8. 8.
    Snijkers, F, Pasquino, R, Olmsted, P, Vlassopoulos, D, “Perspectives on Viscoelasticity and Flow Behavior of Entangled Linear and Branched Polymers.” J. Phys. Condens. Matter, 27 473002–473006 (2015)CrossRefGoogle Scholar
  9. 9.
    Saruwatari, Y, RadTech International UV & EB Technology Expo & Conference 2012Google Scholar
  10. 10.
    Flory, PJ, “Molecular Size Distribution in Three Dimensional Polymers. I. Gelation.” Am. Chem. Soc., 61 3083–3090 (1941)CrossRefGoogle Scholar
  11. 11.
    Stockmayer, WH, “Theory of Molecular Size Distribution and Gel Formation in Branched-Chain Polymers.” J. Chem. Phys., 11 45–55 (1943)CrossRefGoogle Scholar
  12. 12.
    Yu, Q, Xu, S, Zhang, H, Ding, Y, Zhu, S, “Comparison of Reaction Kinetics and Gelation Behaviors in Atom Transfer, Reversible Addition Fragmentation Chain Transfer and Conventional Free Radical Copolymerization of Oligo(ethylene glycol) Methyl Ether Methacrylate and Oligo(ethylene glycol) Dimethacrylate.” Polymer, 50 3488–3494 (2009)CrossRefGoogle Scholar
  13. 13.
    Rosselgong, J, Armes, SP, Barton, W, Price, D, “Synthesis of Highly Branched Methacrylic Copolymers: Observation of Near-Ideal Behavior Using RAFT Polymerisation.” Macromolecules, 42 5919–5924 (2009)CrossRefGoogle Scholar
  14. 14.
    Yan, M, Lin, F-Y, Cochran, EW, “Dynamics of Hyperbranched Polymers Derived from Acrylated Epoxidized Soybean Oil.” Polymer, 125 117–125 (2017)CrossRefGoogle Scholar
  15. 15.
    Johansson, M, Glauser, T, Jansson, A, Hult, A, Malmström, E, Claesson, H, “Design of Coating Resins by Changing the Macromolecular Architecture: Solid and Liquid Coating Systems.” Prog. Org. Coat., 48 194–200 (2003)CrossRefGoogle Scholar
  16. 16.
    Zhang, X, “Modifications and Applications of Hyperbranched Aliphatic Polyesters Based on Dimethylolpropionic Acid.” Polym. Int., 60 153–166 (2011)CrossRefGoogle Scholar
  17. 17.
    Jena, KK, Raju, KVSN, Prathab, B, Aminabhavi, TM, “Hyperbranched Polyesters: Synthesis, Characterization, and Molecular Simulations.” J. Phys. Chem., 111 8801–8811 (2007)CrossRefGoogle Scholar
  18. 18.
    Wooley, KL, Fréchet, JMJ, Hawker, CJ, “Influence of Shape on the Reactivity and Properties of Dendritic, Hyperbranched and Linear Aromatic Polyesters.” Polymer, 35 4489 (1994)CrossRefGoogle Scholar
  19. 19.
    Tang, L, Fang, Y, Fu, Z, “Influence of Reactive Diluent on UV-Curing of Acrylate Terminated Hyperbtanched Polymers.” Chem. Res. Chin. Univ., 20 248–252 (2003)Google Scholar
  20. 20.
    Johansson, M, Glauser, T, Rospo, G, Hult, A, “Radiation Curing of Hyperbranched Polyester Resins.” J. Appl. Polym. Sci., 75 612–618 (2000)CrossRefGoogle Scholar
  21. 21.
    Schmidt, LE, Leterrier, Y, Schmäh, D, Manson, J-AE, James, D, Gustavsson, E, Svensson, LS, “Conversion Analysis of Acrylated Hyperbranched Polymers UV-Cured Below Their Ultimate Glass Transition Temperature.” J. Appl. Polym. Sci., 104 2366–2376 (2007)CrossRefGoogle Scholar
  22. 22.
    Gao, F, Schricker, SR, Tong, Y, Culbertson, BM, “Hyperbranched Polyester with Mixed Methacryloyl Andaliphatic Ester Terminal Groups: Synthesis, Characterization, and Application in Dental Restorative Formulations.” J. Macromol. Sci., Part A: Pure Appl. Chem., 39 367–386 (2002)Google Scholar
  23. 23.
    Vilanen, EK, Skrifvars, M, Vallittu, PK, “Dendrimer Methyl Mathacrylate Co-polymers: Residual Methyl Methacrylate and Degree of Conversion.” J. Biomater. Sci. Polym. Edn., 16 1219–1231 (2005)CrossRefGoogle Scholar
  24. 24.
    Klee, JE, Schneider, C, Hölter, D, Burgath, A, Frey, H, Mülhaupt, R, “Hyperbranched Polyesters and Their Application in Dental Composites: Monomers for Low Shrinking Composites.” Polym. Adv. Technol., 12 346–354 (2001)CrossRefGoogle Scholar
  25. 25.
    Jahandideh, A, Muthukumarappan, K, “Star-Shaped Lactic Acid Based Systems and Their Thermosetting Resins; Synthesis, Characterization, Potential Opportunities and Drawbacks.” Eur. Polym. J., 87 360–379 (2017)CrossRefGoogle Scholar
  26. 26.
    Malmström, E, Hult, A, “Kinetics of Formation of Hyperbranched Polyesters Based on 2,2-bis (methylol)propionic Acid.” Macromolecules, 29 1222–1228 (1996)CrossRefGoogle Scholar
  27. 27.
    Myers, BK, Lapucha, JE, Grayson, SM, “Synthesis and MALDI-ToF Characterization of Dendronized Poly(ethylene glycol)s.” Braz. J. Pharm. Sci., 49 45–55 (2013)CrossRefGoogle Scholar
  28. 28.
    Yu, D, Vladimirov, N, Fréchet, JMJ, “MALDI-ToF in the Characterizations of Dendritic-Linear Block Copolymers and Stars.” Macromolecules, 32 5186–5192 (1999)CrossRefGoogle Scholar
  29. 29.
    Ordelt, Z, Novak, V, Kratky, B, “Reversibility of Diol Addition to Olefin Double Bond of Ethylene-1,2-Dicarbonic Acid in Polycondensation Melts.” Collect. Czechoslov. Chem. Commun., 33 405–415 (1968)CrossRefGoogle Scholar
  30. 30.
    Nadeau, F, Sind, M, Oget, N, “Free-Solvent Michael Addition of Glycerol to Acrylic Compounds.” New J. Chem., 39 9155 (2015)CrossRefGoogle Scholar
  31. 31.
    Ostrowski, S, Jamróz, ME, Dobrowolski, JC, “Formation of Heavy Adducts in Esterification of Acrylic Acid: a DFT Study.” Comput. Theor. Chem., 974 100–108 (2011)CrossRefGoogle Scholar
  32. 32.
    Duncan, JC, Price, DM, “Thermomechanical, Dynamic Mechanical and Dielectric Methods.” In: Gaisford, S, Kett, V, Haines, P, (eds.) Principles of Thermal Analysis and Calorimetry, 2nd edn, p. 164. The Royal Society of Chemistry, Cambridge (2016)Google Scholar
  33. 33.
    Pogue, RT, Ullett, JS, Chartoff, RP, “Determination of the Effects of Cure Conditions on the Photopolymerization of Liquid Crystalline Monomers Using Differential Photo-Calorimetry.” Thermochim. Acta, 339 21–27 (1999)CrossRefGoogle Scholar
  34. 34.
    Keenan, MR, “Autocatalytic Cure Kinetics from DSC Measurements: Zero Initial Cure Rate.” J. Appl. Polym. Sci., 33 1725 (1987)CrossRefGoogle Scholar
  35. 35.
    Nam, JD, Seferis, JC, “Application of the Kinetic Composite Methodology to Autocatalytic-Type Thermoset Prepreg Cures.” J. Appl. Polym. Sci., 33 1555 (1993)CrossRefGoogle Scholar
  36. 36.
    Boey, FYC, Quiang, W, “Experimental Modelling of the Cure Kinetics of an Epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) System.” Polymer, 41 2081 (2000)CrossRefGoogle Scholar
  37. 37.
    Harikrishna, R, Ponrathnam, S, Rajan, CR, “Photopolymerisation Kinetics of Bis-aromatic Based Urethane Acrylate Macromonomers in the Presence of Reactive Diluent.” Prog. Org. Coat., 77 225–231 (2014)CrossRefGoogle Scholar
  38. 38.
    Macosko, CW, “Rheological Changes During Crosslinking.” Br. Polym. J., 17 239–245 (1985)CrossRefGoogle Scholar

Copyright information

© American Coatings Association 2019

Authors and Affiliations

  1. 1.Fraunhofer-Institute for Wood Research – Wilhelm-Klauditz-Institut WKIBraunschweigGermany
  2. 2.Institute of Food ChemistryTechnische Universität BraunschweigBraunschweigGermany

Personalised recommendations