Advertisement

Journal of Coatings Technology and Research

, Volume 16, Issue 2, pp 429–437 | Cite as

UV-cured organic–inorganic hybrid moisture barrier materials based on polybutadiene dimethacrylate

  • Shaohui Liu
  • Ya Wu
  • Jun Nie
  • Yong HeEmail author
Article
  • 48 Downloads

Abstract

In this study, a synthesized polymerizable quaternary ammonium salt (PQAS-18) was intercalated into inorganic sodium montmorillonite (Na-MMT) as an organic modifier via cationic exchange. Afterward, a novel organic–inorganic hybrid material was prepared through in situ UV-curing technology and combined with a polymer matrix based on polybutadiene dimethacrylate (PBDMA). PQAS-18 fixed the crosslinked network due to its double bond, thereby leading to firm bonding between the polymer matrix and organoclay; moreover, our study showed homogeneous dispersion of the lamellar structure in the polymer matrix. X-ray diffraction proved that the distance between Na-MMT layers increased, and water vapor transmission measurement showed that the moisture barrier property of cured hybrid film was remarkably improved.

Keywords

Organic–inorganic hybrid material Polymerizable quaternary ammonium salt Photopolymerization Moisture barrier 

Notes

Acknowledgments

The authors also thank the National Key Research and Development Program of China (2017YFB0307800) and National Natural Science Foundation of China (51573011, 51373015) for their financial support.

Supplementary material

11998_2018_121_MOESM1_ESM.docx (4.3 mb)
Supplementary material 1 (DOCX 4394 kb)

References

  1. 1.
    Sinha Ray, S, Okamoto, M, “Polymer/layered Silicate Nanocomposites: a Review from Preparation to Processing.” Prog. Polym. Sci., 28 (11) 1539–1641 (2003)CrossRefGoogle Scholar
  2. 2.
    Egger, DA, Rappe, AM, Kronik, L, “Hybrid Organic–Inorganic Perovskites on the Move.” Acc. Chem. Res., 49 (3) 573–581 (2016)CrossRefGoogle Scholar
  3. 3.
    Spoljaric, S, Salminen, A, Dang Luong, N, Lahtinen, P, Vartiainen, J, Tammelin, T, Seppälä, J, “Nanofibrillated Cellulose, Poly(Vinyl Alcohol), Montmorillonite Clay Hybrid Nanocomposites with Superior Barrier and Thermomechanical Properties.” Polym. Compos., 35 1117–1131 (2014)Google Scholar
  4. 4.
    Ozkaya, B, Mitschker, F, Ozcan, O, Awakowicz, P, Grundmeier, G, “Inhibition of Interfacial Oxidative Degradation During SiOxPlasma Polymer Barrier Film Deposition on Model Organic Substrates.” Plasma Process. Polym., 12 (4) 392–397 (2015)CrossRefGoogle Scholar
  5. 5.
    Majee, S, Geffroy, B, Bonnassieux, Y, Bourée, J-E, “Interface Effects on the Moisture Barrier Properties of SiNx/PMMA/SiNx Hybrid Structure.” Surf. Coat. Technol., 254 429–432 (2014)CrossRefGoogle Scholar
  6. 6.
    Soonjong, K, Jaeho, J, Jung, E-S, “Gas Barrier Film with a Compositional Gradient Interface Prepared by Plasma Modification of an Organic/Inorganic Hybrid Sol-Gel Coat.” Langmuir, 25 (14) 8051–8055 (2009)CrossRefGoogle Scholar
  7. 7.
    Tzeng, P, Stevens, B, Devlaming, I, Grunlan, JC, “Polymer-Graphene Oxide Quadlayer Thin-Film Assemblies with Improved Gas Barrier.” Langmuir, 31 (21) 5919–5927 (2015)CrossRefGoogle Scholar
  8. 8.
    Kiliaris, P, Papaspyrides, CD, “Polymer/Layered Silicate (Clay) Nanocomposites: An Overview of Flame Retardancy.” Prog. Polym. Sci., 35 (7) 902–958 (2010)CrossRefGoogle Scholar
  9. 9.
    Huang, Q, Cosimbescu, L, Koech, P, Choi, D, Lemmon, JP, “Composite Organic Radical–Inorganic Hybrid Cathode for Lithium-Ion Batteries.” J. Power Sour., 233 69–73 (2013)CrossRefGoogle Scholar
  10. 10.
    Wang, Y-W, Yen, C-T, Chen, W-C, “Photosensitive Polyimide/Silica Hybrid Optical Materials: Synthesis, Properties, and Patterning.” Polymer, 46 (18) 6959–6967 (2005)CrossRefGoogle Scholar
  11. 11.
    Thiyagu, S, Hsueh, CC, Liu, CT, Syu, HJ, Lin, TC, Lin, CF, “Hybrid Organic–Inorganic Heterojunction Solar Cells with 12% Efficiency by Utilizing Flexible Film-Silicon with a Hierarchical Surface.” Nanoscale, 6 (6) 3361–3366 (2014)CrossRefGoogle Scholar
  12. 12.
    Li, A, Shen, H, Ren, H, Wang, C, Wu, D, Martin, RA, Qiu, D, “Bioactive Organic/Inorganic Hybrids with Improved Mechanical Performance.” J. Mater. Chem. B, 3 (7) 1379–1390 (2015)CrossRefGoogle Scholar
  13. 13.
    Jia, X, Zheng, J, Lin, S, Li, W, Cai, Q, Sui, G, Yang, X, “Highly Moisture-Resistant Epoxy Composites: An Approach Based on Liquid Nano-Reinforcement Containing Well-Dispersed Activated Montmorillonite.” RSC Adv., 5 (56) 44853–44864 (2015)CrossRefGoogle Scholar
  14. 14.
    Solomon, MJ, Almusallam, AS, Seefeldt, KF, Somwangthanaroj, A, Varadan, P, “Rheology of Polypropylene/Clay Hybrid Materials.” Macromolecules, 34 1864–1872 (2001)CrossRefGoogle Scholar
  15. 15.
    Kaneko, H, Ishii, R, Suzuki, A, Nakamura, T, Ebina, T, Nge, TT, Yamada, T, “Flexible Clay Glycol Lignin Nanocomposite Film with Heat Durability and High Moisture-Barrier Property.” Appl. Clay Sci., 132–133 425–429 (2016)CrossRefGoogle Scholar
  16. 16.
    Galimberti, M, Coombs, M, Cipolletti, V, Spatola, A, Guerra, G, Lostritto, A, Giannini, L, Pandini, S, Riccò, T, “Delaminated and Intercalated Organically Modified Montmorillonite in Poly(1,4-Cis-Isoprene) Matrix. Indications of Counterintuitive Dynamic-Mechanical Behavior.” Appl. Clay Sci., 97–98 8–16 (2014)CrossRefGoogle Scholar
  17. 17.
    Krishnamoorti, R, Vaia, RA, Giannelis, EP, “Structure and Dynamics of Polymer-Layered Silicate Nanocomposites.” Chem. Mater., 8 1728–1734 (1996)CrossRefGoogle Scholar
  18. 18.
    Deng, Y, Dixon, JB, White, GN, Loeppert, RH, Juo, ASR, “Bonding Between Polyacrylamide and Smectite.” Colloids Surf. A, 281 (1–3) 82–91 (2006)CrossRefGoogle Scholar
  19. 19.
    Sanqin, W, Zepeng, Z, Yunhu, W, Libing, L, Jiansheng, Z, “Influence of Montmorillonites Exchange Capacity on the Basal Spacing of Cation–Anion Organo-Montmorillonites.” Mater. Res. Bull., 59 59–64 (2014)CrossRefGoogle Scholar
  20. 20.
    Ohtsuka, K, “Preparation and Properties of Two-Dimensional Microporous Pillared Interlayered Solids.” Chem. Mater., 9 2039–2050 (1997)CrossRefGoogle Scholar
  21. 21.
    Rathnayake, SI, Xi, Y, Frost, RL, Ayoko, GA, “Structural and Thermal Properties of Inorganic–Organic Montmorillonite: Implications for Their Potential Environmental Applications.” J. Colloid Interf. Sci., 459 17–28 (2015)CrossRefGoogle Scholar
  22. 22.
    Lee, S-D, Park, M-S, Kim, D-W, Kim, I, Park, D-W, “Catalytic Performance of Ion-Exchanged Montmorillonite with Quaternary Ammonium Salts for the Glycerolysis of Urea.” Catal. Today, 232 127–133 (2014)CrossRefGoogle Scholar
  23. 23.
    Tan, H, Nie, J, “Photopolymerization and Characteristics of Polyurethane/Organoclay Nanocomposites.” Macromol. React. Eng., 1 (3) 384–390 (2007)CrossRefGoogle Scholar
  24. 24.
    Sanchez, C, Julián, B, Belleville, P, Popall, M, “Applications of Hybrid Organic–Inorganic Nanocomposites.” J. Mater. Chem., 15 (35–36) 3559 (2005)CrossRefGoogle Scholar
  25. 25.
    Vezir Kahraman, M, Kuğu, M, Menceloğlu, Y, Kayaman-Apohan, N, Güngör, A, “The Novel Use of Organo Alkoxy Silane for the Synthesis of Organic–Inorganic Hybrid Coatings.” J. Non-Cryst. Solids, 352 (21–22) 2143–2151 (2006)CrossRefGoogle Scholar
  26. 26.
    Chen, C, Chung, M, Hsieh, T, Liu, M, Lin, J, Chu, W, Tang, R, Tsai, Y, Juang, F, “Synthesis, Thermal Characterization, and Gas Barrier Properties of UV Curable Organic/Inorganic Hybrid Nanocomposites with Metal Alloys and Their Application for Encapsulation of Organic Solar Cells.” Compos. Sci. Technol., 68 (14) 3041–3046 (2008)CrossRefGoogle Scholar
  27. 27.
    Slavutsky, MA, Bertuzzi, MA, “Improvement of Water Barrier Properties of Starch Films by Lipid Nanolamination.” Food Packag. Shelf Life, 7 41–46 (2016)CrossRefGoogle Scholar
  28. 28.
    Fredrickson, GH, Bicerano, J, “Barrier Properties of Oriented Disk Composites.” J. Chem. Phys., 10 2181–2188 (1999)CrossRefGoogle Scholar
  29. 29.
    Trifol, J, Plackett, D, Sillard, C, Szabo, P, Bras, J, Daugaard, AE, “Hybrid Poly(Lactic Acid)/Nanocellulose/Nanoclay Composites with Synergistically Enhanced Barrier Properties and Improved Thermomechanical Resistance.” Polym. Int., 65 (8) 988–995 (2016)CrossRefGoogle Scholar
  30. 30.
    Tokudome, Y, Hara, T, Abe, R, Takahashi, M, “Transparent and Robust Siloxane-Based Hybrid Lamella Film as a Water Vapor Barrier Coating.” ACS Appl. Mater. Interf., 6 (21) 19355–19359 (2014)CrossRefGoogle Scholar
  31. 31.
    Sangermano, M, Cook, WD, Papagna, S, Grassini, S, “Hybrid UV-Cured Organic–Inorganic IPNs.” Eur. Polym. J., 48 (10) 1796–1804 (2012)CrossRefGoogle Scholar
  32. 32.
    Ingrosso, C, Esposito Corcione, C, Striani, R, Comparelli, R, Striccoli, M, Agostiano, A, Curri, ML, Frigione, M, “UV-Curable Nanocomposite Based on Methacrylic-Siloxane Resin and Surface-Modified TiO2 Nanocrystals.” ACS Appl. Mater. Interf., 7 (28) 15494–15505 (2015)CrossRefGoogle Scholar
  33. 33.
    Chang, Y-W, Kim, SW, “UV Curable Transparent Urethane-Acrylate/Clay Nanocomposite Coating Materials with Thermal Barrier Property.” Surf. Coat. Technol., 232 182–187 (2013)CrossRefGoogle Scholar
  34. 34.
    Nkeuwa, WN, Riedl, B, Landry, V, “UV-cured Clay/Based Nanocomposite Topcoats for Wood Furniture: Part I: Morphological Study, Water Vapor Transmission Rate and Optical Clarity.” Prog. Org. Coat., 77 (1) 1–11 (2014)CrossRefGoogle Scholar
  35. 35.
    Kim, D, Lim, M, Kim, I, Seo, J, Han, H, “Preparation and Properties of Hydrophobic Layered Silicate-Reinforced UV-Curable Poly(Urethane Acrylate) Nanocomposite Films for Packaging Applications.” Prog. Org. Coat., 77 (6) 1045–1052 (2014)CrossRefGoogle Scholar
  36. 36.
    Keller, L, Decker, C, Zahouily, K, Benfarhi, S, Le Meins, JM, Miehe-Brendle, J, “Synthesis of Polymer Nanocomposites by UV-Curing of Organoclay–Acrylic Resins.” Polymer, 45 (22) 7437–7447 (2004)CrossRefGoogle Scholar
  37. 37.
    Mirmohammadi, SA, Nekoomanesh-Haghighi, M, Mohammadian Gezaz, S, Bahri-Laleh, N, Atai, M, “In-situ Photocrosslinkable Nanohybrid Elastomer Based on Polybutadiene/Polyhedral Oligomeric Silsesquioxane.” Mater. Sci. Eng., C, 68 530–539 (2016)CrossRefGoogle Scholar
  38. 38.
    Saffari, A, Sheikh, A, “Peroxide Dynamic Crosslinking in Impact Modification of Polypropylene with Polybutadiene.” Polym. Test., 57 260–269 (2017)CrossRefGoogle Scholar
  39. 39.
    Su, S, Jiang, DD, Wilkie, CA, “Polybutadiene-Modified Clay and its Nanocomposites.” Polym. Degrad. Stab., 84 (2) 279–288 (2004)CrossRefGoogle Scholar
  40. 40.
    Leprince, JG, Hadis, M, Shortall, AC, Ferracane, JL, Devaux, J, Leloup, G, Palin, WM, “Photoinitiator Type and Applicability of Exposure Reciprocity Law in Filled and Unfilled Photoactive Resins.” Dent. Mater., 27 (2) 157–164 (2011)CrossRefGoogle Scholar
  41. 41.
    Uhl, FM, Webster, DC, Davuluri, SP, Wong, S-C, “UV Curable Epoxy Acrylate–Clay Nanocomposites.” Eur. Polymer J., 42 (10) 2596–2605 (2006)CrossRefGoogle Scholar
  42. 42.
    Alexandre, M, Dubois, P, “Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials.” Mater. Sci. Eng., 28 1–63 (2000)CrossRefGoogle Scholar
  43. 43.
    Wei, H-S, Liu, K-T, Chang, Y-C, Chan, C-H, Lee, C-C, Kuo, C-C, “Superior Mechanical Properties of Hybrid Organic–Inorganic Superhydrophilic Thin Film on Plastic Substrate.” Surf. Coat. Technol., 320 377–382 (2017)CrossRefGoogle Scholar

Copyright information

© American Coatings Association 2018

Authors and Affiliations

  1. 1.College of Materials Science and EngineeringBeijing University of Chemical TechnologyBeijingChina

Personalised recommendations