Journal of Coatings Technology and Research

, Volume 13, Issue 5, pp 815–828 | Cite as

Tailoring the properties of deposited thin coating and print features in flexography by application of UV-ozone treatment

  • Tamara Tomašegović
  • David Beynon
  • Tim Claypole
  • Sanja Mahović Poljaček


Printed functional materials are a rapidly growing area of interest for low-cost high-speed device manufacture with flexographic printing seen as a route to achieving this. The relationship between surface tension of the ink and surface free energy (SFE) of the photopolymer plate is a key for optimum performance. However, traditional methods of surface tension modification of the ink/coating often cannot be employed for functional inks. In this research, rapid, permanent modification of flexographic printing plate’s SFE is achieved through controlled UV-ozone treatment, and the effects of the treatment on the polar and dispersive component of SFE are analyzed by Fourier transform infrared attenuated total reflectance spectroscopy, swelling experiments, and roughness measurements. Printing trials using the modified printing plates reveal improved print uniformity and control of deposited ink layer thickness, as well as improved print features—particularly track and pad junctions which can be problematic for printed electronic applications. The ability to rapidly tailor printing plate SFE is of benefit to all volume printing applications. Furthermore, it is of critical importance for functional printing and printed electronics where surface tension of the ink is determined by the functional material and chemical modification is not possible or desirable.


Flexography Printing plate Photopolymer UV-ozone treatment Surface free energy 


  1. 1.
    Bois, C, Dumont, JJP, Blayo, A, Vincent, R, Nayoze, C, Chaussy, D, “Evaluating the Effectiveness of Using Flexography Printing for Manufacturing Catalyst-Coated Membranes for Fuel Cells.” Fuel Cells, 14 (4) 614–625 (2014)CrossRefGoogle Scholar
  2. 2.
    Krebs, FC, Fyenbob, J, Jørgensena, M, “Product Integration of Compact Roll-to-Roll Processed Polymer Solar Cell Modules: Methods and Manufacture Using Flexographic Printing, Slot-Die Coating and Rotary Screen Printing.” J. Mater. Chem., 20 8994–9001 (2010)CrossRefGoogle Scholar
  3. 3.
    Maksud, MI, Yusof, MS, Embong, Z, Nodin, MN, Rejab, NA, “An Investigation on Printability of Carbon Nanotube (CNTs) Inks by Flexographic onto Various Substrates.” Int. J. Mater. Sci. Eng., 2 (1) 49–55 (2014)Google Scholar
  4. 4.
    Galton, D, Bould, D, Claypole, T, “The Effect of Surface Properties on the Printability of Flexographic Printing Plates.” Proceedings of 37th International Research Conference of Iarigai, Montreal, 2010Google Scholar
  5. 5.
    Youssef, KT, “Using of Flexographic Printing Plates for Producing an Organic Field Effect Transistor.” Int. Des. J., 5 (2) 375–383 (2011)Google Scholar
  6. 6.
    Rimdusit, S, Ishida, H, “Development of New Class of Electronic Packaging Materials Based on Ternary Systems of Benzoxazine, Epoxy, and Phenolic Resins.” Polymer, 41 (22) 7941–7949 (2000)CrossRefGoogle Scholar
  7. 7.
    Tomašegović, T, Mahović Poljaček, S, Milčić, D, “Qualitative Analysis of Coverage Value Transfer in Modern Packaging Printing Workflow.” In: Sek, MA, Rouillard, V, Bigger, SW (Eds.) Proceedings of 19th IAPRI World Conference on Packaging, Melbourne, 2014Google Scholar
  8. 8.
    Chung, D, Papadakis, SE, Yam, KL, “Evaluation of a Polymer Coating Containing Triclosan as the Antimicrobial Layer for Packaging Materials.” Int. J. Food Sci. Technol., 38 (2) 165–169 (2003)CrossRefGoogle Scholar
  9. 9.
    Joshi, AV, Bandyopadhyay, S, “Effect of Gravure Process Variables on Void Area in Shrink Film.” J. Coat. Technol. Res., 11 (5) 757–764 (2014)CrossRefGoogle Scholar
  10. 10.
    Joshi, AV, Dettke, C, Steingraeber, J, “Investigation on Electrostatic Assist and Gravure Process Parameters on Solid Mottle Reduction for Shrink Films.” J. Coat. Technol. Res., (2015). doi: 10.1007/s11998-015-9753-5 Google Scholar
  11. 11.
    Israelachvili, JN, Intermolecular and Surface Forces. Elsevier, University of California, New York, 2011Google Scholar
  12. 12.
    Strobel, M, Lyons, CS, Mittal, KL (eds.), Plasma Surface Modification of Polymers: Relevance to Adhesion. VSP, Zeist, 1994Google Scholar
  13. 13.
    Owens, DK, Wendt, RC, “Estimation of the Surface Free Energy of Polymers.” J. Appl. Polym. Sci., 13 (8) 1741–1747 (1969)CrossRefGoogle Scholar
  14. 14.
    Knöll, R, “Photopolymerizable Flexographic Printing Elements Comprising SIS/SBS Mixtures as Binder for the Production of Flexographic Printing Plates.” US Patent 6531263 B2, 2003Google Scholar
  15. 15.
    Mayenez, C, Muyldermans, X, “Flexographic Printing Plates from Photocurable Elastomer Compositions.” EP Patent 0696761 B1, 1998Google Scholar
  16. 16.
    Decker, C, Jenkins, AD, “Kinetic Approach of Oxygen Inhibition in Ultraviolet- and Laser-Induced Polymerizations.” Macromolecules, 18 (6) 1241–1244 (1985)CrossRefGoogle Scholar
  17. 17.
    Tomašegović, T, Mahović Poljaček, S, Cigula, T, “Surface Properties of Flexographic Printing Plates Related to UVC Post-treatment.” J. Print Media Technol. Res., 4 227–234 (2013)Google Scholar
  18. 18.
    Lee, TY, Guymon, CA, Sonny Jönsson, E, Hoyle, CE, “The Effect of Monomer Structure on Oxygen Inhibition of (Meth)acrylates Photopolymerization.” Polymer, 45 (18) 6097–6426 (2004)CrossRefGoogle Scholar
  19. 19.
    Fan, CW, Lee, SC, “Surface Free Energy Effects in Sputter-Deposited WNx Films.” Mater. Trans., 48 (9) 2449–2453 (2007)CrossRefGoogle Scholar
  20. 20.
    Hallab, NJ, Bundy, KJ, O’Connor, K, Moses, RL, Jacobs, JJ, “Evaluation of Metallic and Polymeric Biomaterial Surface Energy and Surface Roughness Characteristics for Directed Cell Adhesion.” Tissue Eng., 7 (1) 55–71 (2001)CrossRefGoogle Scholar
  21. 21.
    Abate, PF, Zahra, VN, Macchi, RL, “Effect of Photopolymerization Variables on Composite Hardness.” J. Prosthet. Dent., 86 (6) 632–635 (2001)CrossRefGoogle Scholar
  22. 22.
    Mahović Poljaček, S, Tomašegović, T, Gojo, M, “Influence of UV Exposure on the Surface and Mechanical Properties of Flexographic Printing Plate.” In: Novaković, D (ed.) Proceedings of GRID 2012, Novi Sad, 2012Google Scholar
  23. 23.
    Crivello, JV, “Advanced Curing Technologies Using Photo-and Electron Beam Induced Cationic Polymerization.” Radiat. Phys. Chem., 63 21–27 (2002)CrossRefGoogle Scholar
  24. 24.
    Mittal, KL, Polymer Surface Modification: Relevance to Adhesion. CRC Press, New York, 2004CrossRefGoogle Scholar
  25. 25.
    Mesic, B, Lestelius, M, Engström, G, Edholm, B, “Printability of PE-Coated Paperboard With Water-Borne Flexography: Effects of Corona Treatment and Surfactants Addition.” Pulp Paper Canada, 106 (11) 229–234 (2005)Google Scholar
  26. 26.
    Johnson, J, “Aspects of Flexographic Print Quality and Relationship to Some Printing Parameters.” Dissertation, Karlstad University (2008)Google Scholar
  27. 27.
    Mahović Poljaček, S, Tomšegović, T, Cigula, T, Milčić, D, “Application of FTIR in Structural Analysis of Flexographic Printing Plate.” In: Politis, AE, Gatsou C (Eds.), Proceedings of IC 2014 Conference, Athens, 2014Google Scholar
  28. 28.
    Phillips, CO, Govindarajan, S, Hamblyn, SM, Conlan, RS, Gethin, DT, Claypole, TC, “Patterning of Antibodies Using Flexographic Printing.” Langmuir, 28 (25) 9878–9884 (2012)CrossRefGoogle Scholar
  29. 29.
    Deganello, D, Cherry, JA, Gethin, DT, Claypole, TC, “Patterning of Micro-Scale Conductive Networks Using Reel-to-Reel Flexographic Printing.” Thin Solid Films, 518 6113–6116 (2010)CrossRefGoogle Scholar
  30. 30.
    Macia, LG, Morrin, A, Smyth, MR, Killard, AJ, “Advanced Printing and Deposition Methodologies for the Fabrication of Biosensors and Biodevices.” Analyst, 135 845–867 (2010)CrossRefGoogle Scholar
  31. 31.
    Novascan UV-ozone cleaner user guide. Accessed 25 Jan 2016
  32. 32.
    MacDermid LUX ITP 60 printing plate manufacturing process. Accessed 25 Jan 2016
  33. 33.
    Schroder, HL, “Process For the Ozone Protection by Photopolymer-Flexoprinting Plates by Alcohol-Soluble Polyamides.” US Patent 4640877 A, 1987Google Scholar
  34. 34.
    Dataphysics, Determination of the surface energy of a solid. Accessed 24 Jan 2015
  35. 35.
    Hejda, F, Solar, P, Kousal, J, “Surface Free Energy Determination by Contact Angle Measurements—A Comparison of Various Approaches.” In: Šafránková J, Pavlů, J (Eds.) Proceedings of WDS’10, Part III, Prague, 2010Google Scholar
  36. 36.
    Wyko NT 2000 user guide. Accessed 25 Jan 2016
  37. 37.
    Hinda, AR, Bhargava, SK, McKinnonb, A, “At The Solid/Liquid Interface: FTIR/ATR—The Tool of Choice.” Adv. Colloid Interface, 93 (1–3) 91–114 (2001)CrossRefGoogle Scholar
  38. 38.
    Liu, J, Zheng, XJ, Tang, KY, “Study on The Gravimetric Measurement of the Swelling Behaviours of Polymer Films.” Rev. Adv. Mater. Sci., 33 452–458 (2013)Google Scholar
  39. 39.
    Kaoru, F, Hiroshi, HI, Fumio, I, Yoshinobu, M, Sakae, S, Minoru, Y, “Flexo Ink Composition.” US Patent 3912675 A, 1975Google Scholar
  40. 40.
    Cheremisinoff, NP, Handbook of Applied Polymer Processing Technology. CRC Press, New York, 1996Google Scholar
  41. 41.
    Drummond, CJ, Chan, DYC, “van der Waals Interaction, Surface Free Energies, and Contact Angles: Dispersive Polymers and Liquids.” Langmiur, 13 3890–3895 (1997)CrossRefGoogle Scholar
  42. 42.
    Oberg, E, Machinery’s Handbook, 29th ed. Industrial Press, New York, 2012Google Scholar
  43. 43.
    Coates, J, “Interpretation of Infrared Spectra, A Practical Approach.” In: Meyers, RA (ed.) Encyclopedia of Analytical Chemistry. Wiley, Chichester, 2000Google Scholar
  44. 44.
    Deflorian, F, Fedrizzi, L, Rossi, S, “Electrochemical Impedance Spectroscopy and Fourier Transform Infrared Spectroscopy of Natural and Accelerated Weathering of Organic Coatings.” Corrosion, 54 (8) 598–605 (1998)CrossRefGoogle Scholar
  45. 45.
    Fridman, A, Plasma Chemistry. Cambridge University Press, Cambridge, 2008CrossRefGoogle Scholar
  46. 46.
    Ramakrishnan, ES, “Detecting Surface Energy Indicative of the Degree of Completion of Cross-Linking Polymerization.” WO Patent 2014021949 A1, 2014Google Scholar
  47. 47.
    Andersson, C, Johnson, J, Järnström, L, “Ultraviolet-Induced Aging of Flexographic Printing Plates Studied by Thermal and Structural Analysis Methods.” J. Appl. Polym. Sci., 112 (3) 1636–1646 (2009)CrossRefGoogle Scholar
  48. 48.
    Hansen, CM, Hansen Solubility Parameters: A User’s Handbook, 2nd ed. CRC Press, Boca Raton, 2007CrossRefGoogle Scholar

Copyright information

© American Coatings Association 2016

Authors and Affiliations

  • Tamara Tomašegović
    • 1
  • David Beynon
    • 2
  • Tim Claypole
    • 2
  • Sanja Mahović Poljaček
    • 1
  1. 1.Faculty of Graphic ArtsUniversity of ZagrebZagrebCroatia
  2. 2.Welsh Centre for Printing and Coating, College of EngineeringSwansea UniversitySwanseaUK

Personalised recommendations