Advertisement

Journal of Coatings Technology and Research

, Volume 3, Issue 4, pp 323–326 | Cite as

Determining the carbon dioxide permeability of paint films

  • C. Carneiro
  • F. Oliveira
  • J. Nogueira
  • A. Mendes
Article
  • 146 Downloads

Abstract

An in-house set-up was developed for determining the permeability of, paint films towards carbon dioxide. The system implemented the so-called Wicke-Kallenback method, described in EN 1062-6. This method consists of a two-chamber permeation cell divided by a supported paint film. A carbon dioxide/nitrogen mixture stream (15% CO2/85% N2) is fed to the retentate chamber and a nitrogen carrier stream is fed to the permeate chamber. Carbon dioxide permeates from the retentate to the permeate chamber. The carbon dioxide flow rate is obtained from the permeate concentration and flow rate. From the carbon dioxide flow rate it is possible to calculate the paint film permeability towards this gas. The coating system is applied on a Kraft paper support sheet; the Kraft paper by itself shows negligible permeation, resistance.

Coatings to be considered as “surface protection systems for concrete” must comply with EN 1504-2. This standard requires that the paint film permeability have an equivalent air thickness of SD≥50 m. The unit developed was able to quickly determine permeabilities as low as an equivalent air thickness of SD=1500 m.

Keywords

Carbon dioxide permeability Wicke-Kallenback method EN 1504-2 EN 1062-6 concrete protection carbonation corrosion testing corrosion corrosion protection 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. (1).
    Viness, T.L. and Manager, P.E., “Architectural Coatings for Repair and Protection of Concrete Facades”, Materials and Construction: Exploring the Connection: Proceedings of the 5th ASCE Materials Engineering Congress, Cincinnati, OH, 232–239, 1999.Google Scholar
  2. (2).
    EN 1504-2, “Products and Systems for the Protection and Repair of Concrete Structures—Definitions, Requirements, Quality Control and Evaluation of Conformity—Part 2: Surface Protection Systems for Concrete”, April 2004.Google Scholar
  3. (3).
    International Report, “Design Manual for Roads and Bridges,” Volume 2, Section 4, Part 3, A/6, May 2004.Google Scholar
  4. (4).
    Jerga, J., “Physico-Mechanical Properties of Carbonated Concrete”, Construction and Building Materials, Vol. 18, 645–652, 2004.CrossRefGoogle Scholar
  5. (5).
    EN 1062-6, “Paints and Varnishes—Coating Materials and Coating Systems for Exterior Masonry and Concrete—Part 6: Determination of Carbon Dioxide Permeability”, 2004.Google Scholar
  6. (6).
    Ruthven, D., Principles of Adsorption and Adsorption Processes, John Wiley & Sons, NY, 1984.Google Scholar
  7. (7).
    Mulder, M., Basic Principles of Membrane Technology, Kluwer Academic Publishers, Dordrecht, 2nd Ed., 1996.CrossRefGoogle Scholar
  8. (8).
    Bird, R., Stewart, W., and Lightfoot, E., Transport Phenomena, John Wiley & Sons, NY, 2nd Ed., 2001.Google Scholar
  9. (9).
    Internal information at GKSS-Geesthacht, Germany, 1994.Google Scholar
  10. (10).
    Pixton, M., Paul, D., and Yampol’skii, Y., “Relationships Between Structure and Transport Properties for Polymers with Aromatic Backbones”, in Polymeric Gas Separation Membranes, Paul, D. and Yampol’skii, Y. (Eds.), CRC Press, Boca Raton, FL, 1994.Google Scholar

Copyright information

© OCCA 2006

Authors and Affiliations

  • C. Carneiro
    • 1
  • F. Oliveira
    • 1
  • J. Nogueira
    • 1
  • A. Mendes
    • 2
  1. 1.Corporação Industrial do Norte, S.A.MaiaPortugal
  2. 2.Faculdade de EngenhariaLEPAE-Departmento de Engenharia QuímicaPortoPortugal

Personalised recommendations