Advertisement

JOM

, Volume 71, Issue 9, pp 3107–3112 | Cite as

Mechanical and Magnetic Properties of Hot-Deformed Nd-Fe-B Magnets Doped with SiC Whiskers

  • Liyun ZhengEmail author
  • Kan Fang
  • Lixin Zhao
  • Dong Zhou
  • Ruijiao Jiang
  • Zhaohui Guo
  • Minggang Zhu
  • Wei Li
Advances in Processing, Manufacturing, and Applications of Magnetic Materials
  • 43 Downloads

Abstract

To improve the mechanical properties of hot-deformed Nd-Fe-B magnets, anisotropic Nd-Fe-B magnets doped with SiC whiskers were fabricated by hot-pressing and hot-deformation processes. The influence of the SiC whiskers on the microstructure and magnetic and mechanical properties of the Nd-Fe-B magnets was investigated. The bending strength of the hot-deformed Nd-Fe-B magnets reinforced with SiC whiskers first increased and then decreased with increasing SiC whisker content from 0 wt.% to 1.0 wt.%. The composite magnet with 0.5 wt.% SiC whiskers exhibited the highest average bending strength and still retained the maximum energy product of approximately 45.8 MGOe. The morphology of the fracture surface of the magnets revealed that the majority of the SiC whiskers were distributed at intergranular boundaries. The phenomenon of SiC whisker pullout from the matrix was observed, which results in increased bending strength. The improvement of the mechanical properties can be attributed to the high strength of the SiC whiskers, the whisker pullout phenomenon, and crack deflection.

Notes

Acknowledgements

This work was financially supported by the Natural Science Foundation of Hebei of China (Grant Nos. E2017402039, E2017402139), Education Department of Hebei of China (Grant No. ZD2017014), and the Key R&D Project of Hebei (Grant No. 18211904D). The authors also thank the National 973 Project for support (Grant 2014CB643701).

References

  1. 1.
    S. Sawatzki, I. Dirba, L. Schultz, and O. Gutfleisch, J. Appl. Phys. 114, 133902 (2013)CrossRefGoogle Scholar
  2. 2.
    X. Tang, H. Sepehri-Amin, T. Ohkubo, M. Yano, M. Ito, A. Kato, N. Sakuma, T. Shoji, T. Schrefl, and K. Hono, Acta Mater. 144, 884 (2018)CrossRefGoogle Scholar
  3. 3.
    B. Peng, T. Ma, Y. Zhang, J. Jin, and M. Yan, Scr. Mater. 131, 11 (2017)CrossRefGoogle Scholar
  4. 4.
    P.A. Withey and H.M. Kennett, IEEE Trans. Magn. 26, 2619 (1990)CrossRefGoogle Scholar
  5. 5.
    C. Jin, R. Chen, W. Yin, X. Tang, Z. Wang, D. Lee, and A. Yan, IEEE Trans. Magn. 50, 2103204 (2014)Google Scholar
  6. 6.
    H.J. Wang, A.H. Li, M.G. Zhu, and W. Li, J. Magn. Magn. Mater. 307, 268 (2006)CrossRefGoogle Scholar
  7. 7.
    A. Li, W. Li, S. Dong, and X. Li, J. Magn. Magn. Mater. 265, 331 (2003)CrossRefGoogle Scholar
  8. 8.
    X. Zheng, M. Li, C. Jin, R. Chen, W. Yin, X. Tang, F. Lei, Z. Wang, J. Ju, D. Lee, and A. Yan, J. Alloys Compd. 728, 607 (2017)CrossRefGoogle Scholar
  9. 9.
    Y.M. Rabinovich and V.V. Sergee, Intermetallics 4, 641 (1996)CrossRefGoogle Scholar
  10. 10.
    O.M. Ragg and I.R. Harris, IEEE Trans. Magn. 29, 2758 (1993)CrossRefGoogle Scholar
  11. 11.
    J. Jiang, Z. Zeng, and J. Wu, J. Magn. Magn. Mater. 214, 61 (2000) CrossRefGoogle Scholar
  12. 12.
    J. Jiang, Z. Zeng, and J. Ye, Intermetallics 4, 269 (2001)CrossRefGoogle Scholar
  13. 13.
    J.F. Liu, P. Vora, M.H. Walmer, E. Kottcamp, S.A. Bauser, A. Higgins, and S. Liu, J. Appl. Phys. 97, 10H101 (2005)CrossRefGoogle Scholar
  14. 14.
    H.R. Madaah Hosseini and A. Kianvash, Mater. Lett. 4, 555 (2006)CrossRefGoogle Scholar
  15. 15.
    P. Yi, M. Lin, R. Chen, D. Lee, and A. Yan, J. Alloys Compd. 491, 605 (2010)CrossRefGoogle Scholar
  16. 16.
    L. Ahmad, S. Ahmed, T. Subhani, K. Saeed, M. Islam, N. Wang, and Y. Zhu, Curr. Appl. Phys. 16, 1649 (2016)CrossRefGoogle Scholar
  17. 17.
    S. Rong, Z. Ji, Y. Zhu, and J. Zhang, Nonferrous Met. Soc. China 18, 388 (2008)CrossRefGoogle Scholar
  18. 18.
    W. Chen, P.K. Nayak, H. Lin, A.C. Lee, and J. Huang, Ceram. Int. 41, 1317 (2015)CrossRefGoogle Scholar
  19. 19.
    P.F. Becher, C.H. Hsueh, P. Angelini, and T.N. Tiegs, J. Am. Ceram. Soc. 71, 1050 (1988)CrossRefGoogle Scholar
  20. 20.
    P. Palmero, Nanomaterials 5, 656 (2015)CrossRefGoogle Scholar
  21. 21.
    P.F. Becher, E.R. Fuller, and P. Anglini, J. Am. Ceram. Soc. 74, 2131 (1991)CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.Division of Functional MaterialsCentral Iron and Steel Research InstituteBeijingPeople’s Republic of China
  2. 2.School of Materials Science and EngineeringHebei University of EngineeringHandanPeople’s Republic of China
  3. 3.School of Machinery and Equipment EngineeringHebei University of EngineeringHandanPeople’s Republic of China

Personalised recommendations