Estimation of Nonlinear Roll Damping by Analytical Approximation of Experimental Free-Decay Amplitudes
- 4 Downloads
Abstract
Damping is critical for the roll motion response of a ship in waves. A common method for the assessment of damping in a ship’s rolling motion is to perform a free-decay experiment in calm water. In this paper, we propose an approach for estimating nonlinear damping that involves a linear exponential analytical approximation of the experimental roll free-decay amplitudes, followed by parametric identification based on the asymptotic method. The restoring moment can be strongly nonlinear. To validate this method, we first analyzed numerically simulated roll free-decay data using rolling equations with two alternative parametric forms: linear-plus-quadratic and linear-plus-cubic damping. By doing so, we obtained accurate estimates of nonlinear damping coefficients, even for large initial roll amplitudes. Then, we applied the proposed method to real free-decay data obtained from a scale model of a bulk barrier, and found the simulated results to be in good agreement with the experimental data. Using only free-decay peak data, the proposed method can be used to estimate nonlinear roll-damping coefficients for conditions with a strongly nonlinear restoring moment and large initial roll amplitudes.
Key words
nonlinear roll damping parametric identification nonlinear restoring moment asymptotic method linear exponential approximationPreview
Unable to display preview. Download preview PDF.
Notes
Acknowledgements
The authors gratefully acknowledge support from the National Natural Science Foundation of China (No. 5160 9224), the Major Program of National Natural Science Foundation of China (No. 51490675), and the Fundamental Research Funds for the Central Universities (No. 201513056).
References
- 26th ITTC Specialist Committee on Stability in Waves, 2011. Recommended procedures-numerical estimation of roll damping. International Towing Tank Conference, Rio de janeiro, Brazil, 548–549.Google Scholar
- Bass D. W., and Haddara M. R., 1988. Nonlinear models of ship roll damping. International Shipbuilding Progress, 35: 5–24.Google Scholar
- Bhattacharyya R., 1987. Dynamics of Marine Vehicles. John Wiley & Sons Inc., New Jersey, 498pp.Google Scholar
- Bogoliubov N. N., and Mitropolsky Y. A., 1961. Asymptotic Methods in the Theory of Nonlinear Oscillations. Gordon & Breach, Science Publishers, New York, 504pp.Google Scholar
- Bulian G., 2004. Estimation of nonlinear roll decay parameters using an analytical approximate solution of decay time history. International Shipbuilding Progress, 51: 5–32.Google Scholar
- Cardo A., Francescutto A., and Nabergoj A., 1982. On damping models in free and forced rolling motion. Ocean Engineering, 9 (2): 171–179.CrossRefGoogle Scholar
- Chakrabarti S., 2001. Empirical calculation of roll damping for ships and barges. Ocean Engineering, 28: 915–932.CrossRefGoogle Scholar
- Chan H. S. Y., Xu Z., and Huang W. L., 1995. Estimation of nonlinear damping coefficients from large-amplitude ship rolling motions. Applied Ocean Research, 17: 217–224.CrossRefGoogle Scholar
- Cotton B., and Spyrou K. J., 2001. An experimental study of nonlinear behavior in roll and capsize. International Shipbuilding Progress, 48: 5–18.Google Scholar
- Faltinsen O. M., 1993. Sea Loads on Ships and Offshore Structures. Cambridge university press, Cambridge, 328pp.Google Scholar
- Falzarano J., Somayajula A., and Seah R., 2015. An overview of the prediction methods for roll damping of ships. Ocean Systems Engineering, 2: 55–76.CrossRefGoogle Scholar
- Froude W., 1872. On the influence of resistance upon the rolling of ships. Naval Science, 1 (1): 411–429.Google Scholar
- Himeno Y., 1981. Prediction of Ship Roll Damping. A State of the Art. Department of Naval Architecture and Marine Engineering, Michigan University, Report No. 239.Google Scholar
- Ikeda Y., Himeno Y., and Tanaka N., 1978. A Prediction Method for Ship Rolling. Department of Naval Architecture, University of Osaka Prefecture, Report No. 405.Google Scholar
- Irkal M. A. R., Nallayarasu S., and Bhattacharyya S. K., 2016. CFD approach to roll damping of ship with bilge keel with experimental validation. Applied Ocean Research, 55: 1–17.CrossRefGoogle Scholar
- Kwon C. S., Kim H. J., Jung D. W., and Lee S. W., 2017. Determination of roll damping coefficients for an FPSO through model tests and CFD Analysis. International Journal of Offshore and Polar Engineering, 27: 193–203.CrossRefGoogle Scholar
- Mathisen J. B., and Price W. G., 1984. Estimation of ship roll damping coefficients. Royal Institution of Naval Architects Transactions, 127: 295–307.Google Scholar
- Mathisen J. B., and Price W. G., 1984. Estimation of ship roll damping coefficients. Royal Institution of Naval Architects Transactions, 127: 295–307.Google Scholar
- Moideen H., Somayajula A., and Falzarano J. M., 2014. Application of volterra series analysis for parametric rolling in irregular seas. Journal of Ship Research, 58: 97–105.CrossRefGoogle Scholar
- Morrall A., 1980. The Gaul disaster: An investigation into the loss of a large stern trawler. Royal Institution of Naval Architects Transactions, 123: 391–416.Google Scholar
- Ribeiro e Silva S., and Guedes Soares C., 2013. Prediction of parametric rolling in waves with a time domain non-linear strip theory model. Ocean Engineering, 72: 453–469.CrossRefGoogle Scholar
- Roberts J. B., 1985. Estimation of nonlinear ship roll damping from free-decay data. Journal of Ship Research, 29: 127–138.Google Scholar
- Schmitke R. T., 1978. Ship sway, roll, and yaw motions in oblique seas. Transactions-Society of Naval Architects and Marine Engineers, 6: 26–46.Google Scholar
- Söder C. J., Rosén A., Werner S., Huss M., and Kuttenkeuler J., 2019. Assessment of ship roll damping through full-scale and model-scale experiments and semi-empirical methods. In: Contemporary Ideas on Ship Stability. Springer, Cham, 177–190.CrossRefGoogle Scholar
- Somayajula A., and Falzarano J., 2015. Large-amplitude timedomain simulation tool for marine and offshore motion prediction. Marine Systems and Ocean Technology, 10: 1–17.CrossRefGoogle Scholar
- Spouge J. R., 1988. Nonlinear analysis of large amplitude rolling experiments. International Shipbuilding Progress, 35: 271–320.Google Scholar
- Taylan M., 1999. Solution of nonlinear roll model by a generalized asymptotic method. Ocean Engineering, 26: 1169–1181.CrossRefGoogle Scholar
- Taylan M., 2000. The effect of nonlinear damping and restoring in ship rolling. Ocean Engineering, 27: 921–932.CrossRefGoogle Scholar
- Uzunoglu E., and Guedes Soares C., 2015. Automated processing of free roll decay experimental data. Ocean Engineering, 102: 17–26.CrossRefGoogle Scholar
- Wassermann S., Feder D. F., and Abdel-Maksoud M., 2016. Estimation of ship roll damping–A comparison of the decay and the harmonic excited roll motion technique for a post panamax container ship. Ocean Engineering, 120: 371–382.CrossRefGoogle Scholar
- Witz J. A., Ablett C. B., and Harrison J. H., 1989. Roll response of semisubmersibles with nonlinear restoring moment characteristics. Applied Ocean Research, 11: 153–166.CrossRefGoogle Scholar
- Xu Z., and Cheung Y. K., 1995. A nonlinear scales method for strongly nonlinear oscillators. Nonlinear Dynamics, 7: 285–299.CrossRefGoogle Scholar
- Zeraatgar H., Asghari M., and Bakhtiari-Nejad F., 2010. A study of the roll motion by means of a free decay test. Journal of Offshore Mechanics and Arctic Engineering, 132: 031303.CrossRefGoogle Scholar
- Zhao W., Efthymiou M., McPhail F., and Wille S., 2016. Nonlinear roll damping of a barge with and without liquid cargo in spherical tanks. Journal of Ocean Engineering and Science, 1 (1): 84–91.CrossRefGoogle Scholar