Seismic fragility curves for structures using non-parametric representations

Research Article

Abstract

Fragility curves are commonly used in civil engineering to assess the vulnerability of structures to earthquakes. The probability of failure associated with a prescribed criterion (e.g., the maximal inter-storey drift of a building exceeding a certain threshold) is represented as a function of the intensity of the earthquake ground motion (e.g., peak ground acceleration or spectral acceleration). The classical approach relies on assuming a lognormal shape of the fragility curves; it is thus parametric. In this paper, we introduce two non-parametric approaches to establish the fragility curves without employing the above assumption, namely binned Monte Carlo simulation and kernel density estimation. As an illustration, we compute the fragility curves for a three-storey steel frame using a large number of synthetic ground motions. The curves obtained with the non-parametric approaches are compared with respective curves based on the lognormal assumption. A similar comparison is presented for a case when a limited number of recorded ground motions is available. It is found that the accuracy of the lognormal curves depends on the ground motion intensity measure, the failure criterion and most importantly, on the employed method for estimating the parameters of the lognormal shape.

Keywords

earthquake engineering fragility curves lognormal assumption non-parametric approach kernel density estimation epistemic uncertainty 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors are thankful to the anonymous reviewers for various valuable comments that helped improve the quality of the manuscript. Discussions with Dr. Sanaz Rezaeian, who provided clarifications on the stochastic ground motion model used in this study, are also acknowledged.

References

  1. 1.
    Porter K A. An overview of PEER's performance-based earthquake engineering methodology. In: Proc. 9th Int. Conf. on Applications of Stat. and Prob. in Civil Engineering (ICASP9), San Francisco. 2003, 6–9Google Scholar
  2. 2.
    Baker J W, Cornell C A. Uncertainty propagation in probabilistic seismic loss estimation. Structural Safety, 2008, 30(3): 236–252CrossRefGoogle Scholar
  3. 3.
    Günay S, Mosalam K M. PEER performance-based earthquake engineering methodology, revisited. Journal of Earthquake Engineering, 2013, 17(6): 829–858CrossRefGoogle Scholar
  4. 4.
    Mackie K, Stojadinovic B. Fragility basis for California highway overpass bridge seismic decision making. Pacific Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley; 2005.Google Scholar
  5. 5.
    Ellingwood B R, Kinali K. Quantifying and communicating uncertainty in seismic risk assessment. Structural Safety, 2009, 31(2): 179–187CrossRefGoogle Scholar
  6. 6.
    Seo J, Duenas-Osorio L, Craig J I, Goodno B J. Metamodel-based regional vulnerability estimate of irregular steel moment-frame structures subjected to earthquake events. Engineering Structures, 2012, 45: 585–597CrossRefGoogle Scholar
  7. 7.
    Banerjee S, Shinozuka M. Nonlinear static procedure for seismic vulnerability assessment of bridges. Comput-Aided Civ Inf, 2007, 22(4): 293–305CrossRefGoogle Scholar
  8. 8.
    Richardson J E, Bagchi G, Brazee R J. The seismic safety margins research program of the U.S. Nuclear Regulatory Commission. Nuclear Engineering and Design, 1980, 59(1): 15–25CrossRefGoogle Scholar
  9. 9.
    Pei S, Van De Lindt J. Methodology for earthquake-induced loss estimation: An application to woodframe buildings. Structural Safety, 2009, 31(1): 31–42CrossRefGoogle Scholar
  10. 10.
    Eads L, Miranda E, Krawinkler H, Lignos D G. An efficient method for estimating the collapse risk of structures in seismic regions. Earthquake Engineering & Structural Dynamics, 2013, 42(1): 25–41CrossRefGoogle Scholar
  11. 11.
    Dukes J, DesRoches R, Padgett J E. Sensitivity study of design parameters used to develop bridge specific fragility curves. In: Proceedings of the 15th World Conf. Earthquake Eng. 2012Google Scholar
  12. 12.
    Güneyisi E M, Altay G. Seismic fragility assessment of effectiveness of viscous dampers in R/C buildings under scenario earthquakes. Structural Safety, 2008, 30(5): 461–480CrossRefGoogle Scholar
  13. 13.
    Seyedi D M, Gehl P, Douglas J, Davenne L, Mezher N, Ghavamian S. Development of seismic fragility surfaces for reinforced concrete buildings by means of nonlinear time-history analysis. Earthquake Engineering & Structural Dynamics, 2010, 39(1): 91–108Google Scholar
  14. 14.
    Gardoni P, Der Kiureghian A, Mosalam K M. Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations. Journal of Engineering Mechanics, 2002, 128(10): 1024–1038CrossRefGoogle Scholar
  15. 15.
    Ghosh J, Padgett J E. Aging considerations in the development of time-dependent seismic fragility curves. Journal of Structural Engineering, 2010, 136(12): 1497–1511CrossRefGoogle Scholar
  16. 16.
    Argyroudis S, Pitilakis K. Seismic fragility curves of shallow tunnels in alluvial deposits. Soil Dynamics and Earthquake Engineering, 2012, 35: 1–12CrossRefGoogle Scholar
  17. 17.
    Chiou J, Chiang C, Yang H, Hsu S. Developing fragility curves for a pile-supported wharf. Soil Dynamics and Earthquake Engineering, 2011, 31(5-6): 830–840CrossRefGoogle Scholar
  18. 18.
    Quilligan A O, Connor A, Pakrashi V. Fragility analysis of steel and concrete wind turbine towers. Engineering Structures, 2012, 36: 270–282CrossRefGoogle Scholar
  19. 19.
    Borgonovo E, Zentner I, Pellegri A, Tarantola S, de Rocquigny E. On the importance of uncertain factors in seismic fragility assessment. Reliability Engineering & System Safety, 2013, 109(0): 66–76CrossRefGoogle Scholar
  20. 20.
    Karantoni F, Tsionis G, Lyrantzaki F, Fardis M N. Seismic fragility of regular masonry buildings for in-plane and out-of-plane failure. Earthquakes and Structures, 2014, 6(6): 689–713CrossRefGoogle Scholar
  21. 21.
    Rossetto T, Elnashai A. A new analytical procedure for the derivation of displacementbased vulnerability curves for populations of RC structures. Engineering Structures, 2005, 27(3): 397–409CrossRefGoogle Scholar
  22. 22.
    Shinozuka M, Feng M, Lee J, Naganuma T. Statistical analysis of fragility curves. Journal of Engineering Mechanics, 2000, 126(12): 1224–1231CrossRefGoogle Scholar
  23. 23.
    Ellingwood B R. Earthquake risk assessment of building structures. Reliability Engineering & System Safety, 2001, 74(3): 251–262CrossRefGoogle Scholar
  24. 24.
    Zentner I. Numerical computation of fragility curves for NPP equipment. Nuclear Engineering and Design, 2010, 240(6): 1614–1621CrossRefGoogle Scholar
  25. 25.
    Gencturk B, Elnashai A, Song J. Fragility relationships for populations of woodframe structures based on inelastic response. Journal of Earthquake Engineering, 2008, 12(sup2): 119–128CrossRefGoogle Scholar
  26. 26.
    Jeong S H, Mwafy A M, Elnashai A S. Probabilistic seismic performance assessment of code-compliant multi-story RC buildings. Engineering Structures, 2012, 34: 527–537CrossRefGoogle Scholar
  27. 27.
    Banerjee S, Shinozuka M. Mechanistic quantification of RC bridge damage states under earthquake through fragility analysis. Probabilistic Engineering Mechanics, 2008, 23(1): 12–22CrossRefGoogle Scholar
  28. 28.
    Karamlou A, Bocchini P. Computation of bridge seismic fragility by large-scale simulation for probabilistic resilience analysis. Earthquake Engineering & Structural Dynamics, 2015, 44(12): 1959–1978CrossRefGoogle Scholar
  29. 29.
    Mai C V, Sudret B, Mackie K, Stojadinovic B, Konakli K. Non parametric fragility curves for bridges using recorded ground motions. In: Cunha A, Caetano E, Ribeiro P, Müller G, eds. IX International Conference on Structural Dynamics, Porto, Portugal. 2014, 2831–2838Google Scholar
  30. 30.
    Rezaeian S, Der Kiureghian A. A stochastic ground motion model with separable temporal and spectral nonstationarities. Earthquake Engineering & Structural Dynamics, 2008, 37(13): 1565–1584CrossRefGoogle Scholar
  31. 31.
    Choi E, DesRoches R, Nielson B. Seismic fragility of typical bridges in moderate seismic zones. Engineering Structures, 2004, 26(2): 187–199CrossRefGoogle Scholar
  32. 32.
    Padgett J E, DesRoches R. Methodology for the development of analytical fragility curves for retrofitted bridges. Earthquake Engineering & Structural Dynamics, 2008, 37(8): 1157–1174CrossRefGoogle Scholar
  33. 33.
    Zareian F, Krawinkler H. Assessment of probability of collapse and design for collapse safety. Earthquake Engineering & Structural Dynamics, 2007, 36(13): 1901–1914CrossRefGoogle Scholar
  34. 34.
    Shome N, Cornell C A, Bazzurro P, Carballo J E. Earthquakes, records, and nonlinear responses. Earthquake Spectra, 1998, 14(3): 469–500CrossRefGoogle Scholar
  35. 35.
    Luco N, Bazzurro P. Does amplitude scaling of ground motion records result in biased nonlinear structural drift responses? Earthquake Engineering & Structural Dynamics, 2007, 36(13): 1813–1835CrossRefGoogle Scholar
  36. 36.
    Cimellaro G P, Reinhorn A M, D’Ambrisi A, De Stefano M. Fragility analysis and seismic record selection. Journal of Structural Engineering, 2009, 137(3): 379–390CrossRefGoogle Scholar
  37. 37.
    Mehdizadeh M, Mackie K R, Nielson B G. Scaling bias and record selection for fragility analysis. In: Proceedings of the 15th World Conf. Earthquake Eng. 2012Google Scholar
  38. 38.
    Bazzurro P, Cornell C A, Shome N, Carballo J E. Three proposals for characterizing MDOF nonlinear seismic response. Journal of Structural Engineering, 1998, 124(11): 1281–1289CrossRefGoogle Scholar
  39. 39.
    Vamvatsikos D, Cornell C A. Incremental dynamic analysis. Earthquake Engineering & Structural Dynamics, 2002, 31(3): 491–514CrossRefGoogle Scholar
  40. 40.
    Wand M, Jones M C. Kernel smoothing. Chapman and Hall, 1995Google Scholar
  41. 41.
    Duong T. Bandwidth selectors for multivariate kernel density estimation. Dissertation of the School of mathematics and Statistics, University of Western Australia, 2004Google Scholar
  42. 42.
    Duong T, Hazelton M L. Cross-validation bandwidth matrices for multivariate kernel density estimation. Scandinavian Journal of Statistics, 2005, 32(3): 485–506MathSciNetCrossRefMATHGoogle Scholar
  43. 43.
    Frankel A D, Mueller C S, Barnhard T P, Leyendecker E V,Wesson R L, Harmsen S C, Klein FW, Perkins D M, Dickman N C, Hanson S L, Hopper M G. USGS national seismic hazard maps. Earthquake Spectra, 2000, 16(1): 1–19CrossRefGoogle Scholar
  44. 44.
    Sudret B, Mai C V. Calcul des courbes de fragilité par approches non-paramétriques. In: Proc. 21e Congrès Français de Mécanique (CFM21), Bordeaux, 2013Google Scholar
  45. 45.
    Bradley B A, Lee D S. Accuracy of approximate methods of uncertainty propagation in seismic loss estimation. Structural Safety, 2010, 32(1): 13–24CrossRefGoogle Scholar
  46. 46.
    Liel A B, Haselton C B, Deierlein G G, Baker J W. Incorporating modeling uncertainties in the assessment of seismic collapse risk of buildings. Structural Safety, 2009, 31(2): 197–211CrossRefGoogle Scholar
  47. 47.
    Efron B. Bootstrap methods: another look at the Jackknife. Annals of Statistics, 1979, 7(1): 1–26MathSciNetCrossRefMATHGoogle Scholar
  48. 48.
    Kwong N S, Chopra A K, McGuire R K. Evaluation of ground motion selection and modification procedures using synthetic ground motions. Earthquake Engineering & Structural Dynamics, 2015, 44(11): 1841–1861CrossRefGoogle Scholar
  49. 49.
    Rezaeian S, Der Kiureghian A. Simulation of synthetic ground motions for specified earthquake and site characteristics. Earthquake Engineering & Structural Dynamics, 2010, 39(10): 1155–1180Google Scholar
  50. 50.
    Vetter C, Taflanidis A A. Comparison of alternative stochastic ground motion models for seismic risk characterization. Soil Dynamics and Earthquake Engineering, 2014, 58: 48–65CrossRefGoogle Scholar
  51. 51.
    Boore D M. Simulation of Ground Motion Using the Stochastic Method. Pure and Applied Geophysics, 2003, 160(3): 635–676CrossRefGoogle Scholar
  52. 52.
    Eurocode 1. Actions on structures- Part 1–1: general actionsdensities, self-weight, imposed loads for buildings. 2004Google Scholar
  53. 53.
    Pacific Earthquake Engineering and Research Center. OpenSees: The Open System for Earthquake Engineering Simulation, 2004Google Scholar
  54. 54.
    Eurocode 3. Design of steel structures- Part 1–1: General rules and rules for buildings. 2005Google Scholar
  55. 55.
    Joint Committee on Structural Safety. Probabilistic Model Code- Part 3: Resistance Models, 2001Google Scholar
  56. 56.
    Deierlein G G, Reinhorn A M, Willford M R. Nonlinear structural analysis for seismic design. NEHRP Seismic Design Technical Brief No 2010, 4Google Scholar
  57. 57.
    Mackie K, Stojadinovic B. Improving probabilistic seismic demand models through refined intensity measures. In: Proceeding of the 13th World Conf. Earthquake Eng. International Association for Earthquake Eng, Japan, 2004Google Scholar
  58. 58.
    Padgett J, Nielson B, DesRoches R. Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios. Earthquake Engineering & Structural Dynamics, 2008, 37(5): 711–725CrossRefGoogle Scholar
  59. 59.
    Cornell C, Jalayer F, Hamburger R, Foutch D. Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines. Journal of Structural Engineering, 2002, 128(4): 526–533CrossRefGoogle Scholar
  60. 60.
    Lagaros N D, Fragiadakis M. Fragility assessment of steel frames using neural networks. Earthquake Spectra, 2007, 23(4): 735–752CrossRefGoogle Scholar
  61. 61.
    Federal Emergency Management Agency. Washington, DC. Commentary for the seismic rehabilitation of buildings; 2000Google Scholar
  62. 62.
    Eurocode 8. Design of structures for earthquake resistance- Part 1: General rules, seismic actions and rules for buildings, 2004Google Scholar
  63. 63.
    Mackie K, Stojadinovic B. Seismic demands for performance-based design of bridges. Tech. Rep.; Pacific Earthquake Engineering Research Center, 2003Google Scholar
  64. 64.
    Ramamoorthy S K, Gardoni P, Bracci J. Probabilistic demand models and fragility curves for reinforced concrete frames. Journal of Structural Engineering, 2006, 132(10): 1563–1572CrossRefGoogle Scholar
  65. 65.
    Bai JW, Gardoni P, HuesteMD. Story-specific demand models and seismic fragility estimates for multi-story buildings. Structural Safety, 2011, 33(1): 96–107CrossRefGoogle Scholar
  66. 66.
    Muggeo VMR. Estimating regression models with unknown breakpoints. Statistics in Medicine, 2003, 22(19): 3055–3071CrossRefGoogle Scholar
  67. 67.
    Duong T. ks: kernel density estimation and kernel discriminant analysis for multivariate data in R. Journal of Statistical Software, 2007, 21(7): 1–16CrossRefGoogle Scholar
  68. 68.
    Choun Y S, Elnashai A S. A simplified framework for probabilistic earthquake loss estimation. Probabilistic Engineering Mechanics, 2010, 25(4): 355–364CrossRefGoogle Scholar
  69. 69.
    Marsh M L, Stringer S J. Performance-based seismic bridge design, a synthesis of highway practice. vol. 440. Transportation Research Board, Washington D C, 2013CrossRefGoogle Scholar
  70. 70.
    Lu Y, Gu X, Guan J. Probabilistic drift limits and performance evaluation of reinforced concrete columns. Journal of Structural Engineering, 2005, 131(6): 966–978CrossRefGoogle Scholar
  71. 71.
    Jankovic S, Stojadinovic B. Probabilistic performance based seismic demand model for R/C frame buildings. In: Proceeding of the 13th World Conf. Earthquake Eng. 2004Google Scholar
  72. 72.
    Jalayer F, Cornell C A. Alternative non-linear demand estimation methods for probability-based seismic assessments. Earthquake Engineering & Structural Dynamics, 2009, 38(8): 951–972CrossRefGoogle Scholar
  73. 73.
    Baker J W. Probabilistic structural response assessment using vector-valued intensity measures. Earthquake Engineering & Structural Dynamics, 2007, 36(13): 1861–1883CrossRefGoogle Scholar
  74. 74.
    Celik O C, Ellingwood B. Seismic fragilities for non-ductile reinforced concrete frames- role of aleatoric and epistemic uncertainties. Structural Safety, 2010, 32(1): 1–12CrossRefGoogle Scholar
  75. 75.
    Jalayer F, De Risi R, Manfredi G. Bayesian Cloud Analysis: effcient structural fragility assessment using linear regression. Bulletin of Earthquake Engineering, 2014, 13(4): 1183–1203CrossRefGoogle Scholar
  76. 76.
    Ghanem R, Spanos P. Stochastic Finite Elements: A Spectral Approach. Courier Dover Publications, 2003MATHGoogle Scholar
  77. 77.
    Blatman G, Sudret B. Adaptive sparse polynomial chaos expansion based on Least Angle Regression. Journal of Computational Physics, 2011, 230(6): 2345–2367MathSciNetCrossRefMATHGoogle Scholar
  78. 78.
    Sudret B, Piquard V, Guyonnet C. Use of polynomial chaos expansions to establish fragility curves in seismic risk assessment. In: Degrande G L, Müller G, eds. In: Proceedings of the 8th International Conference Structural Dynamics (EURODYN 2011), Leuven, Belgium, 2011Google Scholar
  79. 79.
    Sudret B, Mai C V. Computing seismic fragility curves using polynomial chaos expansions. In: Deodatis G, ed. In: Proceedings of the 11th International Conference Structural Safety and Reliability (ICOSSAR'2013). New York, USA, 2013Google Scholar

Copyright information

© Higher Education Press and Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  1. 1.Risk, Safety & Uncertainty Quantification, Institute of Structural EngineeringETH ZürichZürichSwitzerland

Personalised recommendations