Advertisement

Frontiers in Energy

, Volume 13, Issue 1, pp 64–70 | Cite as

Simulation analysis of municipal solid waste pyrolysis and gasification based on Aspen plus

  • Na DengEmail author
  • Dongyan Li
  • Qiang Zhang
  • Awen Zhang
  • Rongchang Cai
  • Biting Zhang
Research Article
  • 213 Downloads

Abstract

To predict and analyze the municipal solid waste (MSW) pyrolysis and gasification process in an updraft fixed bed more veritably and appropriately, numerical modeling based on Gibbs energy minimization was executed using the Aspen plus software. The RYield module was combined with the RGibbs module to describe the pyrolysis section, while the RGibbs module was used for the gasification section individually. The proposed model was used to forecast and analyze the target performance parameters including syngas composition, lower heating value (LHV) and carbon conversion rate under different conditions of the gasification temperatures, and ratios and types of gasifying agents. The results indicate that there is a good agreement between the experimental data and the simulated data obtained using this model. The predicted optimum gasification temperature is approximately 750°C, and the best ratio of water vapor as gasifying agent is around 0.4. The mixture of flue gas and water vapor has an economical and recycled prospect among four commonly used gasifying agents.

Keywords

municipal solid waste (MSW) pyrolysis gasification Aspen plus simulation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The work is financially supported by the National Natural Science Foundation of China (Grant No. 51406133).

References

  1. 1.
    Zhang Q L, Wu Y S, Dor L, Yang W H, Blasiak W. A thermodynamic analysis of solid waste gasification in the Plasma Gasification Melting process. Applied Energy, 2013, 112(4): 405–413CrossRefGoogle Scholar
  2. 2.
    Meng A, Chen S, Zhou H, Long Y, Zhang Y, Li Q. Pyrolysis and simulation of typical components in wastes with macro-TGA. Fuel, 2015, 157(3): 1–8CrossRefGoogle Scholar
  3. 3.
    Shabbar S, Janajreh I. Thermodynamic equilibrium analysis of coal gasification using Gibbs energy minimization method. Energy Conversion and Management, 2013, 65(1): 755–763CrossRefGoogle Scholar
  4. 4.
    Zhao Y H,Wen H, Xu Z H. Conceptual design and simulation study of a co-gasification technology. Energy Conversion and Management, 2006, 47(11-12): 1416–1428CrossRefGoogle Scholar
  5. 5.
    Zheng H X, Kaliyan N, Morey R V. Aspen plus simulation of biomass integrated gasification combined cycle systems at corn ethanol plants. Biomass and Bioenergy, 2010, 56(56): 197–210Google Scholar
  6. 6.
    Jin H. Process simulation research on high-temperature gasification of biomass with steam. Dissertation for the Master Degree. Harbin: Harbin Institute of Technology, 2013 (in Chinese)Google Scholar
  7. 7.
    Zheng J. Experimental study on MSWfluidized-bed gasification and the optimization of prediction model. Dissertation for the Doctoral Degree. Hangzhou: Zhejiang University, 2009 (in Chinese)Google Scholar
  8. 8.
    Chen C. Experimental study and process simulation on MSW pyrolysis and gasification in fixed bed. Dissertation for the Doctoral Degree. Hangzhou: Zhejiang University, 2011 (in Chinese)Google Scholar
  9. 9.
    Begum S, Rasul M G, Akbar D. A numerical investigation of municipal solid waste gasification using aspen plus. Procedia Engineering, 2014, 90: 710–717CrossRefGoogle Scholar
  10. 10.
    Nikoo M B, Mahinpey N. Simulation of biomass gasification in fluidized bed reactor using ASPEN PLUS. Biomass and Bioenergy, 2008, 32(12): 1245–1254CrossRefGoogle Scholar
  11. 11.
    Shen L H, Gao Y, Xiao J. Simulation of hydrogen production from biomass gasification in interconnected fluidized beds. Biomass and Bioenergy, 2008, 32(2): 120–127CrossRefGoogle Scholar
  12. 12.
    Chen C, Jin Y Q, Yan J H, Chi Y. Simulation of municipal solid waste gasification in two different types of fixed bed reactors. Fuel, 2013, 103: 58–63CrossRefGoogle Scholar
  13. 13.
    Luo S Y. Research on municipal solid waste shredder and effect of particle size on pyrolysis & gasification performance. Dissertation for the Doctoral Degree. Wuhan: Huazhong University of Science and Technology, 2010 (in Chinese)Google Scholar
  14. 14.
    He M Y, Xiao B, Liu S M, Guo X J, Luo S Y, Xu Z L, Feng Y, Hu Z Q. Hydrogen-rich gas from catalytic steam gasification of municipal solid waste (MSW): influence of steam to MSW ratios and weight hourly space velocity on gas production and composition. International Journal of Hydrogen Energy, 2009, 34(5): 2174–2183CrossRefGoogle Scholar
  15. 15.
    Sun L. Biomass Pyrolysis and Gasification Principles and Techniques. Beijing: Chemical Industry Press, 2013Google Scholar

Copyright information

© Higher Education Press and Springer-Verlag Berlin Heidelberg 2017

Authors and Affiliations

  • Na Deng
    • 1
    • 2
    Email author
  • Dongyan Li
    • 1
  • Qiang Zhang
    • 3
  • Awen Zhang
    • 1
  • Rongchang Cai
    • 1
  • Biting Zhang
    • 1
  1. 1.School of Environmental Science and EngineeringTianjin UniversityTianjinChina
  2. 2.MOE Key Laboratory of Efficient Utilization of Low and Medium Grade EnergyTianjinChina
  3. 3.Tianjin University Research Institute of Architectural Design & Urban PlanningTianjinChina

Personalised recommendations