Fault simulation of boiler heating surface ash deposition in a power plant system
Article
First Online:
Received:
Accepted:
- 76 Downloads
Abstract
The simulation model of a power generation system was developed based on EASY5 simulation platform. The performances of the power plant under the conditions of the furnace slagging and ash deposition of the heating surfaces in the boiler were simulated. The results show that the simulation model can reasonably reflect the characteristics of the power plant when each component is under fault conditions. Through fault simulation, the change of the performance parameters can be obtained, which can be used in fault diagnosis system as the diagnosis criterion for expert system.
Keywords
boiler slagging ash deposition fault simulationPreview
Unable to display preview. Download preview PDF.
References
- 1.Borio R W, Levasseur A A. Overview of coal ash deposition in boilers. In: 188th National Meeting of the American Chemical Society, Philadelphia, USA, 1984, 193–203Google Scholar
- 2.Harding N S, O’Connor D C. Ash deposition impacts in the power industry. Fuel Processing Technology, 2007, 88(11,12): 1082–1093CrossRefGoogle Scholar
- 3.Devir G P, Pohl J H, Creelman R A. Development of quantitative techniques to characterize mineral matter transformations in a pulverized coal fired boiler. In: Proceedings of the 2001 International Joint Power Generation Conference, New Orleans, LA: ASME, 2001, 1–11Google Scholar
- 4.Qian Y, Liu Y W. Modular modeling method and its implementation on the simulation platform on EASY5. Computer Simulation, 2007, 24(8): 85–89 (in Chinese)MathSciNetGoogle Scholar
- 5.Su M. A volume component model and its solution for power system simulation. Power Engineering, 1998, 18(2): 75–78, 82 (in Chinese)Google Scholar
- 6.Su M, Weng S L. Modularized simulation modeling for a large steam turbine. Journals of System Simulation, 1998, (3): 30–34 (in Chinese)Google Scholar
- 7.Fan L. Foundation and simulation of general module of steam turbine system. Dissertation for the Master’s Degree, Chongqing: Chongqing University, 2007Google Scholar
- 8.Liu L X. Thermal system simulation and modeling technique based on general purpose platform-application in gas-steam combined cycle modular simulation. Disseration for the Master’s Degree. Shanghai: Shanghai Jiao Tong University, 2002Google Scholar
- 9.Liu Y Q, Wang Y X, Wang H F, Li P. Experimental investigations on combustion characteristics of the blast furnace gas. In: 3rd International Conference on Bioinformatics and Biomedical Engineering (ICBBE), Beijing, 2009Google Scholar
- 10.Flynn ME, O’Malley MJ. A drum boiler model for long term power system dynamic simulation. IEEE Transactions on Power Systems, 1999, 14(1): 209–217CrossRefGoogle Scholar
- 11.Valero A, Cortes C. Ash fooling in coal-fired utility boilers. Monitoring and optimization of on-load cleaning. Progress in Energy and Combustion Science, 1996, 22(2): 189–200CrossRefGoogle Scholar
Copyright information
© Higher Education Press and Springer-Verlag Berlin Heidelberg 2011