Advertisement

Influence of current density and W concentration on Co–W alloys used as catalysts in electrodes for Li–O2 batteries

  • Josiel Martins Costa
  • Thayane Carpanedo de Morais Nepel
  • Ambrósio Florêncio de Almeida Neto
Original Paper
  • 43 Downloads

Abstract

In this study, we verified the influence of tungsten (W) concentrations and current density for the electroplating of the cobalt–tungsten (Co–W) alloy on two substrates (nickel foam and steel mesh). The statistical evaluation showed a mathematical model that related the efficiency of deposition with the parameters analyzed. The efficiency varied from 0 to 60.05% for the nickel foam and 0 to 64.39% for the steel mesh. Scanning electron microscopy showed that to increase the current density made the surface less uniform, due to the size of the grains formed and X-ray diffraction pointed to the formation of amorphous coating alloys. Electrodeposition of the alloy in the steel mesh occurred with greater contribution by forced convection, as opposed to the nickel foam that had a smaller contribution, according to the effects of fluid dynamics. The Co–W alloys evidenced by energy-dispersive X-rays spectroscopy were tested in the cell with a constant pressure of O2 and presented an alternative for the use of catalysts in Li–O2 batteries.

Keywords

Coating materials Co–W alloy Electroplating Nickel foam Steel mesh 

Notes

Acknowledgements

This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001. The authors thank the Espaço da EscritaPró-Reitoria de Pesquisa/UNICAMP for the language services provided.

References

  1. Awadallah EA (2015) Promoting effect of group VI metals on Ni/MgO for catalytic growth of carbon nanotubes by ethylene chemical vapour deposition. Chem Pap 69:316–324.  https://doi.org/10.1515/chempap-2015-0029 CrossRefGoogle Scholar
  2. Banhart J (2001) Manufacture, characterisation and application of cellular metals and metal foams. Prog Mater Sci 46:559–632.  https://doi.org/10.1016/S0079-6425(00)00002-5 CrossRefGoogle Scholar
  3. Bera P, Seenivasan H, Rajam KS, Grips VKW (2012) XRD, FESEM and XPS studies on heat treated Co–W electrodeposits. Mater Lett 76:103–105.  https://doi.org/10.1016/j.matlet.2012.02.046 CrossRefGoogle Scholar
  4. Cameán I, Lavela P, Tirado JL, García AB (2010) On the electrochemical performance of anthracite-based graphite materials as anodes in lithium-ion batteries. Fuel 89:986–991.  https://doi.org/10.1016/j.fuel.2009.06.034 CrossRefGoogle Scholar
  5. Cho Y-B, Moon S, Lee C, Lee Y (2017) One-pot electrodeposition of cobalt flower-decorated silver nanotrees for oxygen reduction reaction. Appl Surf Sci 394:267–274.  https://doi.org/10.1016/j.apsusc.2016.10.068 CrossRefGoogle Scholar
  6. Choi R, Jung J, Kim G, Song K, Kim Y-I, Jung SC, Han Y-K, Song H, Kang Y-M (2014) Ultra-low overpotential and high rate capability in Li–O2 batteries through surface atom arrangement of PdCu nanocatalysts. Energy Environ Sci 7:1362–1368.  https://doi.org/10.1039/c3ee43437k CrossRefGoogle Scholar
  7. Crittenden JC, Trussell RR, Hand DW, Howe KJ, Tchobanoglous G (2012) MWH’s water treatment: principles and design, 3rd edn. Wiley, HobokenCrossRefGoogle Scholar
  8. Della Noce R, Benedetti AV, Magnani M, Passamani EC, Kumar H, Cornejo DR, Ospina CA (2014) Structural, morphological and magnetic characterization of electrodeposited Co–Fe–W alloys. J Alloys Compd 611:243–248.  https://doi.org/10.1016/j.jallcom.2014.05.157 CrossRefGoogle Scholar
  9. Dulal SMSI, Yun HJ, Shin CB, Kim C-K (2007) Electrodeposition of CoWP film: III. Effect of pH and temperature. Electrochim Acta 53:934–943.  https://doi.org/10.1016/j.electacta.2007.08.006 CrossRefGoogle Scholar
  10. Gáliková Z, Chovancová M, Danielik V (2006) Properties of Ni–W alloy coatings on steel substrate. Chem Pap 60:353–359.  https://doi.org/10.2478/s11696-006-0064-2 CrossRefGoogle Scholar
  11. Gan L, Murakami H, Saeki I (2018) High temperature oxidation of Co–W electroplated type 430 stainless steel for the interconnect of solid oxide fuel cells. Corros Sci 134:162–168.  https://doi.org/10.1016/j.corsci.2018.02.026 CrossRefGoogle Scholar
  12. Ghaferi Z, Raeissi K, Golozar MA, Edris H (2011) Characterization of nanocrystalline Co–W coatings on Cu substrate, electrodeposited from a citrate-ammonia bath. Surf Coat Technol 206:497–505.  https://doi.org/10.1016/j.surfcoat.2011.07.074 CrossRefGoogle Scholar
  13. Ghaferi Z, Sharafi S, Bahrololoom ME (2015) Effect of current density and bath composition on crystalline structure and magnetic properties of electrodeposited FeCoW alloy. Appl Surf Sci 355:766–773.  https://doi.org/10.1016/j.apsusc.2015.07.083 CrossRefGoogle Scholar
  14. Gittleson FS, Sekol RC, Doubek G, Linardi M, Taylor AD (2014) Catalyst and electrolyte synergy in Li–O2 batteries. Phys Chem Chem Phys 16:3230–3237.  https://doi.org/10.1039/c3cp54555e CrossRefPubMedGoogle Scholar
  15. Gómez E, Pellicer E, Vallés E (2003) Influence of the bath composition and the pH on the induced cobalt–molybdenum electrodeposition. J Electroanal Chem 556:137–145.  https://doi.org/10.1016/S0022-0728(03)00339-5 CrossRefGoogle Scholar
  16. Ibrahim MAM, Abd El Rehim SS, Moussa SO (2003) Electrodeposition of noncrystalline cobalt–tungsten alloys from citrate electrolytes. J Appl Electrochem 33:627–633.  https://doi.org/10.1023/A:1024916903544 CrossRefGoogle Scholar
  17. Imanishi N, Yamamoto O (2014) Rechargeable lithium-air batteries: characteristics and prospects. Mater Today 17:24–30.  https://doi.org/10.1016/j.mattod.2013.12.004 CrossRefGoogle Scholar
  18. Li Y-H, Gregory S (1974) Diffusion of ions in sea water and in deep-sea sediments. Geochim Cosmochim Acta 38:703–714.  https://doi.org/10.1016/0016-7037(74)90145-8 CrossRefGoogle Scholar
  19. Li F, Ohnishi R, Yamada Y, Kubota J, Domen K, Yamada A, Zhou H (2013) Carbon supported TiN nanoparticles: an efficient bifunctional catalyst for non-aqueous Li–O2 batteries. Chem Commun 49:1175–1177.  https://doi.org/10.1039/c2cc37042e CrossRefGoogle Scholar
  20. Li J, Deng N, Wu P, Zhou Z (2019) Elaborating the Cu-network structured of the W–Cu composites by sintering intermittently electroplated core-shell powders. J Alloys Compd 770:405–410.  https://doi.org/10.1016/j.jallcom.2018.08.158 CrossRefGoogle Scholar
  21. Lu YC, Gasteiger HA, Crumlin E, McGuire R, Horn S (2010) Electrocatalytic activity studies of select metal surfaces and implications in Li–air batteries. J Electrochem Soc 157:1016–1025.  https://doi.org/10.1149/1.3462981 CrossRefGoogle Scholar
  22. McKloskey BD, Scheffler R, Speidel A, Bethune DS, Shelby RM, Luntz AC (2011) On the efficacy of electrocatalysis in nonaqueous Li–O2 batteries. J Am Chem Soc 133:18038–18041.  https://doi.org/10.1021/ja207229n CrossRefGoogle Scholar
  23. Obradovic MD, Stevanovic RM, Despic AR (2003) Electrochemical deposition of Ni–W alloys from ammonia–citrate electrolyte. J Electroanal Chem 552:185–196.  https://doi.org/10.1016/S0022-0728(03)00151-7 CrossRefGoogle Scholar
  24. Oh SH, Black R, Pomerantseva E, Lee J-H, Nazar LF (2012) Synthesis of a metallic mesoporous pyrochlore as a catalyst for lithium–O2 batteries. Nat Chem 4:1004–1010.  https://doi.org/10.1038/nchem.1499 CrossRefPubMedGoogle Scholar
  25. Oliveira ALM, Costa JD, de Sousa MB, Ja J, Alves N, Campos ARN, Santana RAC, Prasad S (2015) Studies on electrodeposition and characterization of the Ni–W–Fe alloys coatings. J Alloys Compd 619:697–703.  https://doi.org/10.1016/j.jallcom.2014.09.087 CrossRefGoogle Scholar
  26. Porto MB, Alvim LB, de Almeida Neto AF (2017) Nickel removal from wastewater by induced co-deposition using tungsten to formation of metallic alloys. J Clean Prod 142:3293–3299.  https://doi.org/10.1016/j.jclepro.2016.10.140 CrossRefGoogle Scholar
  27. Prasad S, Santana RAC, Campos ARN, Leite VD (2007) Potentiometric and conductometric studies on the system acid-isopolytungstate and the formation of lanthanum tungstates. Eclet Quím 32:71–78.  https://doi.org/10.1590/S0100-46702007000100010 CrossRefGoogle Scholar
  28. Ren X, Zhang SS, Tran DT, Read J (2011) Oxygen reduction reaction catalyst on lithium/air battery discharge performance. J Mater Chem 21:10118–10125.  https://doi.org/10.1039/c0jm04170j CrossRefGoogle Scholar
  29. Santana RAC, Campos ARN, Prasad S, Leite VD (2007) Optimization of the electrolytic bath for electrodeposition of corrosion resistant Fe–W–B alloys. Quím Nova 30:360–365.  https://doi.org/10.1590/S0100-40422007000200023 CrossRefGoogle Scholar
  30. Sevim M, Francia C, Amici J, Vankova S, Sener T, Metin O (2016) Bimetallic MPt (M: Co, Cu, Ni) alloy nanoparticles assembled on reduced graphene oxide as high performance cathode catalysts for rechargable lithium–oxygen batteries. J Alloy Compd 683:231–240.  https://doi.org/10.1016/j.jallcom.2016.05.094 CrossRefGoogle Scholar
  31. Sivagami IN, Prasanna K, Santhoshkumar P, Jo YN, Seo GY, Lee CW (2017) Agar templated electrodeposition of binary zinc–cobalt alloy and formation of zinc–cobalt–carbon nanocomposite for application in secondary lithium batteries. J Alloys Compd 697:450–460.  https://doi.org/10.1016/j.jallcom.2016.08.177 CrossRefGoogle Scholar
  32. Song L, Wang T, Ma Y, Xue H, Guo H, Fan X, Xia W, Gong H, He J (2017) Functional species encapsulated in nitrogen-doped porous carbon as a highly efficient catalyst for the oxygen reduction reaction. Chem Eur J 23:3398–3405.  https://doi.org/10.1002/chem.201605026 CrossRefPubMedGoogle Scholar
  33. Su F-H, Liu C-S, Huang P (2012) Effect of complexing agents and pH on microstructure and tribological properties of Co–W coatings produced by double pulse electrodeposition. Appl Surf Sci 258:6550–6557.  https://doi.org/10.1016/j.apsusc.2012.03.075 CrossRefGoogle Scholar
  34. Taymaz I, Benli M (2014) Emissions and fuel economy for a hybrid vehicle. Fuel 115:812–817.  https://doi.org/10.1016/j.fuel.2013.04.045 CrossRefGoogle Scholar
  35. Tsyntaru N (2016) Electrodeposition of cobalt–tungsten alloys and their application for surface engineering. Russ J Electrochem 52:1041–1047.  https://doi.org/10.1134/S1023193516110136 CrossRefGoogle Scholar
  36. Tsyntsaru N, Dikusar A, Cesiulis H, Celis JP, Bobanova Zh, Sidelnikova S, Belevskii S, Yapontseva Yu, Bersirova O, Kublanovskii V (2009) Tribological and corrosive characteristics of electrochemical coatings based on cobalt and iron superalloys. Powder Metall Met Ceram 48:419–428.  https://doi.org/10.1007/s11106-009-9150-7 CrossRefGoogle Scholar
  37. Tsyntsaru N, Cesiulis H, Pellicer E, Celis J-P, Sort J (2013) Structural, magnetic, and mechanical properties of electrodeposited cobalt–tungsten alloys: intrinsic and extrinsic interdependencies. Electrochim Acta 104:94–103.  https://doi.org/10.1016/j.electacta.2013.04.022 CrossRefGoogle Scholar
  38. Turoňová AM, Capik M, Oriňaková R, Gál M (2015) Electrolytic preparation of nanosized Cu/Ni–Cu multilayered coatings. Chem Pap 69:462–469.  https://doi.org/10.1515/chempap-2015-0035 CrossRefGoogle Scholar
  39. Vernickaite E, Tsyntsaru N, Cesiulis H (2016a) Electrodeposited Co–W alloys and their prospects as effective anode for methanol oxidation in acidic media. Surf Coat Technol 307:1322–1328.  https://doi.org/10.1016/j.surfcoat.2016.07.049 CrossRefGoogle Scholar
  40. Vernickaite E, Tsyntsaru N, Cesiulis H (2016b) Electrochemical co-deposition of tungsten with cobalt and copper: peculiarities of binary and ternary alloys coatings formation. Surf Coat Technol 307:1341–1349.  https://doi.org/10.1016/j.surfcoat.2016.07.025 CrossRefGoogle Scholar
  41. Wang L, Gao Y, Xu T, Xue Q (2006) A comparative study on the tribological behavior of nanocrystalline nickel and cobalt coatings correlated with grain size and phase structure. Mater Chem Phys 99:96–103.  https://doi.org/10.1016/j.matchemphys.2005.10.014 CrossRefGoogle Scholar
  42. Wang L, Li D, Koike M, Watanabe H, Xu Y, Nakagawa K, Tomishige K (2013) Catalytic performance and characterization of Ni–Co catalysts for the steam reforming of biomass tar to synthesis gas. Fuel 112:654–661.  https://doi.org/10.1016/j.fuel.2012.01.073 CrossRefGoogle Scholar
  43. Welty JR, Wicks CE, Wilson RE, Rorrer GL (2007) Fundamentals of momemtum, heat and mass transfer, 5th edn. Wiley, Hoboken, pp 589–591Google Scholar
  44. Xiao J, Wang D, Xu W, Wang D, Williford RF, Liu J, Zhang J-G (2010) Optimization of air electrode for li/air batteries. J Electrochem Soc 157:A487–A492.  https://doi.org/10.1149/1.3314375 CrossRefGoogle Scholar
  45. Yang X-H, Xia Y-Y (2010) The effect of oxygen pressures on the electrochemical profile of lithium/oxygen battery. J Solid State Eletrochem 14:109–114.  https://doi.org/10.1007/s10008-009-0791-8 CrossRefGoogle Scholar
  46. Yermolenko IY, Ved MV, Sakhnenko ND, Sachanova YI (2017) Composition, morphology, and topography of galvanic coatings Fe–Co–W and Fe–Co–Mo. Nanoscale Res Lett 12:1–9.  https://doi.org/10.1186/s11671-017-2128-3 CrossRefGoogle Scholar
  47. Yun HJ, Dulal SMSI, Shin CB, Kim C-K (2008) Characterisation of electrodeposited Co–W–P amorphous coatings on carbon steel. Electrochim Acta 54:370–375.  https://doi.org/10.1016/j.electacta.2008.07.068 CrossRefGoogle Scholar
  48. Zamora G, Arurault L, Winterton P, Bes R (2011) Impact of the type of anodic film formed and deposition time on the characteristics of porous anodic aluminium oxide films containing Ni metal. Chem Pap 65:460–468.  https://doi.org/10.2478/s11696-011-0039-9 CrossRefGoogle Scholar
  49. Zemanová M, Kurinec R, Jorík V, Kadleĉiková (2012) Ni–W alloy coatings deposited from a citrate electrolyte. Chem Pap 66:492–501.  https://doi.org/10.2478/s11696-011-0116-0 CrossRefGoogle Scholar

Copyright information

© Institute of Chemistry, Slovak Academy of Sciences 2018

Authors and Affiliations

  • Josiel Martins Costa
    • 1
  • Thayane Carpanedo de Morais Nepel
    • 1
  • Ambrósio Florêncio de Almeida Neto
    • 1
  1. 1.Department of Products and Processes Design, School of Chemical EngineeringUniversity of CampinasCampinasBrazil

Personalised recommendations