Skip to main content
SpringerLink
Log in

Production of mahogany sawdust reinforced LDPE wood–plastic composites using statistical response surface methodology

  • ORIGINAL RESEARCH
  • Published:
Journal of Forestry Research Aims and scope Submit manuscript

Abstract

We produced wood–plastic composite board by using sawmill wastage of mahogany (Swietenia macrophylla) wood and low density polyethylene. We used multi-response optimization to optimize the process parameters of composite board production including mixing ratio, fire retardant (%) and pressing time (min). We investigated the effects of these three process parameters in the mechanical and physical properties of the composite board. Afterwards, Box–Behnken design was performed as response surface methodology with desirability functions to attain the optimal level of mixing ratio, fire retardant and pressing time (min). The maximum modulus of elasticity (MOE) and modulus of rupture (MOR) were achieved at the optimal conditions of wood plastic mixing ratio of 60:40, pressing time of 9 min and zero fire retardant percentage. The optimized MOR and MOE were 13.12 and 1,781.0 N mm−2, respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  • ASTM D1037-12 (2012) Standard test methods for evaluating properties of wood-base fiber and particle panel materials. ASTM International, West Conshohocken

  • ASTM D790-10 (2010) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM International, West Conshohocken

  • Atuanya CU, Ibhadode AOA, Igboanugo AC (2011) Potential of using recycled low-density polyethylene in wood composites board. Afr J Environ Sci Technol 5(5):389–396

    CAS  Google Scholar 

  • Ayrilmis N, Benthien JT, Thoemen H, White RH (2011) Effects of fire retardants on physical, mechanical, and fire properties of flat-pressed WPCs. Eur J Wood Wood Prod 70:215–224

    Article  Google Scholar 

  • Ayrilmis N, Akbulut T, Dundar T, White RH, Mengeloglu F, Buyuksari U, Candan Z, Avci E (2012) Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood–polypropylene composite. Constr Build Mater 33:63–69

    Article  Google Scholar 

  • Azizi K, Tabarsa T, Ashori A (2011) Performance characterizations of particleboards made with wheat straw and waste veneer splinters. Compos B 42(7):2085–2089

    Article  Google Scholar 

  • Benthien JT, Thoemen H (2012) Effects of raw materials and process parameters on the physical and mechanical properties of flat pressed WPC panels. Compos A Appl Sci Manuf 43(4):570–576

    Article  CAS  Google Scholar 

  • Box GP, Behnken DW (1960) Some new three level design for the study of quantitative variables. Technometrics 2(4):456–475

    Article  Google Scholar 

  • Chen JH, Zhong JC, Cai YH, Su WB, Yang YB (2007) Morphology and thermal properties in the binary blends of poly (propylene-co-ethylene) copolymer and isotactic polypropylene with polyethylene. Polymer 48(10):2946–2957

    Article  CAS  Google Scholar 

  • Islam MA, Sakkas V, Albanis TA (2009) Application of statistical design of experiment with desirability functions for the removal of organophosphorus pesticide from aqueous solution by low cost material. J Hazard Mater 170(1):230–238

    Article  CAS  PubMed  Google Scholar 

  • Islam MA, Nikoloutsou Z, Sakkas V, Papatheodorou M, Albanis TA (2010) Statistical optimization by combination of response surface methodology and desirability function for removal of azo dye from aqueous solution. Int J Environ Anal Chem 90:495–507

    Google Scholar 

  • Islam MA, Alam MR, Hannan MO (2012) Multiresponse optimization based on statistical response surface methodology and desirability function for the production of particleboard. Compos B Eng 43(3):861–868

    Article  CAS  Google Scholar 

  • Kuo M, Adams D, Myers D, Curry D, Heemstra K, Smith J, Bian Y (1998) Properties of wood agricultural fiberboard bonden with soybean-based adhesives. For Prod J 48(2):71–75

    CAS  Google Scholar 

  • Lee H, Kim HJ, Park HJ (2002) Performance of paper sludge/polypropylene fiber/linocellulosic fiber composites. J Ind Eng Chem 8(1):50–56

    CAS  Google Scholar 

  • Leu SY, Yang TH, Lo SF, Yang TH (2011) Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs.). Constr Build Mater 29:120–127

    Article  Google Scholar 

  • Myers RH, Montgomery DC (2001) Response surface methodology: process and product optimization using designed experiments, 2nd edn. Wiley, New York

    Google Scholar 

  • Najafi SK, Kiaefar A, Hamidina E, Tajvidi M (2007) Water absorption behavior of composites from sawdust and recycled plastics. J Reinf Plast Compos 26(3):341–348

    Article  CAS  Google Scholar 

  • Nirdosha G, Setunge S, Jollands M (2011) Design of experiments (DOE) for investigating particleboard production. In: Fragomeni S, Venkatesan S, Lam NTK, Setunge S (eds) Incorporating sustainable practice in mechanics of structures and materials. Taylor & Francis Group, London

    Google Scholar 

  • Obidiegwu MU, Nwosu CT (2012) Mechanical and flammability properties of low density polyethylene/ALSTONIA BOONEI wood fiber composite. Asian J Nat Appl Sci 1(2):53–62

    Google Scholar 

  • Panshin AJ, De Zeewe C (1980) Textbook of wood technology, 4th edn. McGraw – Hill Book Company, Inc, New York, pp 1–402

    Google Scholar 

  • Pramila R, Ramesh KV (2011) Biodegradation of low density polyethylene (LDPE) by fungi isolated from municipal landfill area. J Microbiol Biotechnol 1(4):131–136

    CAS  Google Scholar 

  • Pritchard G (2004) Two technologies merge: wood plastic composites. Plast Addit Compd 6(4):18–21

    Article  CAS  Google Scholar 

  • Rahim S (2009) Wood waste utilization for wood composite industries in Malaysia. Paper presented at Asia Pacific Forest Products Workshop, 14 Dec

  • Stark NM, White HR, Mueller SA, Osswald TA (2010) Evaluation of various fire retardants for use in wood flour-polyethylene composites. Polym Degrad Stab 95(9):1903–1910

    Article  CAS  Google Scholar 

  • Tabarsa T, Ashori A, Gholamzadeh M (2011) Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse. Compos B Eng 42(5):1330–1335

    Article  Google Scholar 

  • Tamrakar S, Lopez-Anido RA (2011) Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties. Constr Build Mater 25(10):3977–3988

    Article  Google Scholar 

  • Yamashita Y, Watanabe H, Takeda S (1999) Rubber wood characteristics of its supply and development of its utilization. For Resour 71:65–70

    Google Scholar 

  • Yang WJ, Xie YJ, Wang HG, Liu BY, Wang QW (2013) Impacts of freezing and thermal treatments on dimensional and mechanical properties of wood flour-HDPE composite. J For Res 24(1):143–147

    Article  CAS  Google Scholar 

  • Youngquist JA, Krzysik AM, Chow P, Meimban R (1997) Properties of composite panels. In: Roger RM et al (eds) Paper and composites from agro-based resources. CRC Lewis Publisher, Boca Raton, pp 309–311

    Google Scholar 

  • Yuan FP, Ou RX, Xie YJ, Wang QW (2013) Reinforcing effects of modified Kevlar® fiber on the mechanical properties of wood-flour/polypropylene composites. J For Res 24(1):149–153

    Article  CAS  Google Scholar 

  • Zhang ZT, Sun ZB, Yang XH, Dong YH (2013) Manufacturing composite from regenerated wood fiber and polyethylene via paten-pressing process. Adv Mater Res 645:39–42

    Article  CAS  Google Scholar 

  • Zhao J, Wang XM, Chang JM, Zheng K (2008) Optimization of processing variables in wood–rubber composite panel manufacturing technology. Bioresour Technol 99(7):2384–2391

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Forestry and Wood Technology Discipline, Khulna University, Khulna, 9208, Bangladesh

    Sofina-E-Arab & Md. Azharul Islam

Authors
  1. Sofina-E-Arab
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Md. Azharul Islam
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Md. Azharul Islam.

Additional information

The online version is available at http://www.springerlink.com

Corresponding editor: Yu Lei

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sofina-E-Arab, Islam, M.A. Production of mahogany sawdust reinforced LDPE wood–plastic composites using statistical response surface methodology. J. For. Res. 26, 487–494 (2015). https://doi.org/10.1007/s11676-015-0031-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11676-015-0031-2

Keywords

Search

Navigation