Advertisement

Journal of Failure Analysis and Prevention

, Volume 19, Issue 1, pp 230–236 | Cite as

Structural Integrity Analysis of Two Over-Temperature Methanation Furnaces

  • Ming ZhangEmail author
  • Weiqiang Wang
  • Pengfei Wang
Technical Article---Peer-Reviewed
  • 13 Downloads

Abstract

Two methanation furnaces each had two over-temperature faults. The shell deformation degree, hydrogen cracking, and the microstructure and property of the shell material were analyzed through on-site inspection and simulation experiments. Considering the effects of pearlite spheroidization, the deterioration limit of the shell material was estimated. Strength checks of the two over-temperature methanation furnaces were conducted. The analyses revealed that the methanation furnaces basically met the requirements of subsequent safe operation, and relevant opening reinforcements were suggested.

Keywords

Methanation furnace Over-temperature Material deterioration Strength check Opening reinforcement 

Notes

Acknowledgments

The authors gratefully acknowledge the financial support provided by National Natural Science Foundation of China (Grant No. 51705265). Thanks to Dr. Edward C. Mignot, Shandong University, for linguistic advice.

References

  1. 1.
    Y.H. Zhang, Analysis for overheating of methanator and its treatment. Large Scale Nitrogenous Fertil. Ind. 32(5), 339–342 (2009) (in Chinese) Google Scholar
  2. 2.
    Z.J. Hao, Y. Li, B.L. Liu, Cause analysis of over high temperature occurred in methane furnace and counter measure. Process Equip. Pip. 45(5), 34–35 (2008) (in Chinese) Google Scholar
  3. 3.
    “Tensile Test of Metal the First Part: RT Test Method,” GB/T228.1-2010, Mechanical Industry Standard of PR China, 2010 (in Chinese) Google Scholar
  4. 4.
    “Boiler and Pressure Vessel Steel Plate,” GB713-2008, Mechanical Industry Standard of PR China, 2008 (in Chinese) Google Scholar
  5. 5.
    “Metal Microstructure Inspection Method,” GB/T 13298-2015, Mechanical Industry Standard of PR China, 2015 (in Chinese) Google Scholar
  6. 6.
    “The Rating Criteria of Pearlite Spheroidization for 15CrMo Steel in Thermal Power Plant,” DL/T 787-2001, Mechanical Industry Standard of PR China, 2001 (in Chinese)Google Scholar
  7. 7.
    “Pressure Vessel,” GB150-2011, Mechanical Industry Standard of PR China, 2011 (in Chinese) Google Scholar
  8. 8.
    J.Y. Zheng, Q.W. Dong, Z.F. Sang, Process Equipment Design (Chemical Industry Press, Beijing, 2005) (in Chinese) Google Scholar

Copyright information

© ASM International 2019

Authors and Affiliations

  1. 1.School of Mechanical and Automotive EngineeringQilu University of Technology (Shandong Academy of Sciences)JinanChina
  2. 2.School of Mechanical EngineeringShandong UniversityJinanChina
  3. 3.Engineering and Technology Research Center for Special Equipment Safety of Shandong ProvinceJinanChina

Personalised recommendations