Journal of Failure Analysis and Prevention

, Volume 16, Issue 2, pp 264–270 | Cite as

Fracture Surface Morphology of Delamination Failure of Polymer Fiber Composites Under Different Failure Modes

Technical Article---Peer-Reviewed

Abstract

The delamination of fiber reinforced polymer composites is one of the most common failures encountered in industrial applications. The most unique macroscopic and microscopic fracture surface features of the delaminations under different failure modes are of interests not only for practical failure analysis investigations but also it helps to reveal the physics behind the delamination phenomenon. In this work, fracture surface morphology of the delaminated carbon fiber polymer composites under mode I, mode II, and mixed-mode I/II loading conditions is investigated mainly with scanning electron microscopy. The unique fractographic features are identified and discussed. The results on ductile and brittle matrix composites have shown their own features, and most important of all the alignment angle of fibrils in the resin-rich ductile matrix could be correlated with the delamination mode.

Keywords

Delamination Fiber composites Fractograph Failure modes 

Notes

Acknowledgments

The author wishes to acknowledge the support of Mechanical Engineering Department—Imperial College of Science, Technology and Medicine (UK) throughout a project; in particular, James Gordon Williams, Anthony James Kinloch, and Bamber Blackman for their contribution.

References

  1. 1.
    K. Friedrich, Fractographic analysis of polymer composites, in Application of Fracture Mechanics to Composite Materials, ed. by K. Friedrich (Elsevier, Amsterdam, 1989)Google Scholar
  2. 2.
    T. Johannesson, R. Sjöblom, R. Seldén, The detailed structure of delamination fracture surfaces in graphite/epoxy laminates. J. Mater. Sci. 19, 1171–1177 (1984)CrossRefGoogle Scholar
  3. 3.
    D. Purslow, Matrix fractography of fibre-reinforced thermoplastics, Part 1. Peel failures. Composites 18(5), 365–374 (1987)CrossRefGoogle Scholar
  4. 4.
    D. Purslow, Matrix fractography of fibre-reinforced thermoplastics, Part 2. Shear failures. Composites 19(2), 115–126 (1988)CrossRefGoogle Scholar
  5. 5.
    E.S. Greenhalgh, Failure Analysis and Fractography of Polymer Composites (Woodhead Publishing Ltd., Cambridge, 2009)CrossRefGoogle Scholar
  6. 6.
    W.D. Bascom, S.Y. Gweon, Fractography and failure mechanisms of carbon fibre-reinforced composite materials, in Fractography and Failure Mechanisms of Polymer and Composites, ed. by A.C. Roulin-Moloney (Elsevier, London, 1989)Google Scholar
  7. 7.
    S. Hashemi, A.J. Kinloch, J.G. Williams, The analysis of interlaminar fracture in uniaxial fibre-polymer composites. Proc. R. Soc. Lond. A 427, 173–199 (1990)CrossRefGoogle Scholar
  8. 8.
    A.J. Kinloch, Y. Wang, J.G. Williams, P. Yayla, An experimental analysis of mixed-mode delamination tests for composite materials. Compos. Sci. Technol. 47, 226–237 (1992)Google Scholar
  9. 9.
    W.S. Johnson, P.D. Mangalgiri, Investigating of Fibre Bridging in Double Cantilever Beam Specimens, NASA Technical Memorandum 87716 (NASA, Hampton, 1986)Google Scholar
  10. 10.
    T. Johannesson, M. Blikstad, Fractography and fracture criteria of the delamination process, in Delamination and Debonding of Materials, ASTM STP 876, ed. by W.S. Johnson (American Society for Testing and Materials, Philadelphia, 1985), pp. 411–423Google Scholar
  11. 11.
    M. Charalambides, A.J. Kinloch, Y. Wang, J.G. Williams, On the analysis of mixed-mode failure. Int. J. Fract. 54, 269–291 (1992)Google Scholar
  12. 12.
    P. Yayla, P.S. Leevers, Rapid crack propagation in pressurised plastic pipe—II Critical pressures for polyethylene pipe. Eng. Fract. Mech. 42(4), 675–682 (1992)Google Scholar

Copyright information

© ASM International 2016

Authors and Affiliations

  1. 1.Mechanical Engineering Department, Engineering FacultyMarmara UniversityIstanbulTurkey

Personalised recommendations